Tiles are one of the most basic decoration materials. In order to achieve a better decoration effect, designers can achieve better decorative effects through the tile floor mosaic design. However, the decorative effect achieved by tile floor mosaic is very obvious. The following small series introduces the tile floor cleaning and tile floor parqueting. Tile floor cleaning 1, the tile surface can be washed with detergent, soap. 2, for the tile surface of cement scales, lime and other stains, you can use the King of the King of the King of the King to remove. 3, the paint on the tile floor can be dissolved with chemical solvents. 4. The glue on the tile floor can be washed with banana water. It can be dissolved in various organic solvents and is flammable. It is mainly used as a solvent and thinner for painting. 5, rust, lime scale, tea stains, drinks stains and other substances can be used to remove the Wang King decontamination. 6, cement and paint can be moistened with water, and then gently scrape off with a plastic sheet, the paint can be cleaned with polyurethane paint thinner, and then wash the floor tile with detergent and other clean. Tile floor parquet considerations 1, tile floor mosaic to install a pre-designed program for paving, this can achieve pre-designed results. 2. Before tile floor mosaic, you can put the floor tiles outwards against the wall. Each corner of the floor tiles should be covered with foam to prevent damage to the corners of the tiles. It is forbidden to press heavy objects on the surface of the floor tiles. 3. Use good cement or tile adhesive when laying. 4. When laying, make sure that the floor surface of the floor tile is free of loose material and oil, and the surface of the floor tile should be solid and smooth. 5, to maintain the grass-roots level, and then set aside the whole piece of parquet thickness. 6. The tiles of the paving and mosaic should be soaked, and the height of the mosaic size should be adjusted when paving. 7, the entire piece of tile and the surrounding tiles can be common at the same time, so that the flower flatness is better. 8, after the completion of tile floor mosaic, you need to make some fine-tuning, this time can use the rubber hammer in the middle of the floor tile gently tap, and then adjust the edge of the floor tile. Editor's summary: About the tile floor cleaning and tile floor parqueting instructions are introduced here, and I hope to be helpful to everyone. Want to learn more related knowledge can focus on this site information. Tile Tile Laying Tiles Maintenance Tile Floor Cleaning
Ningbo Actmix Produce the organic blowing agent Actmix®ADC-50GE & Actmix®OBSH-50GE, which application for the manufacture of sponge and foam rubber articles based on natural and synthetic rubbers. The foaming temperature from 150℃ to 210℃.Lower mooney viscosity at lower temperature(50℃), with high dispersiblity,ensure the foaming rubber parts with uniform fine structure.
Ningbo Actmix produce the microsphere foaming agent Actmix®HDU/GE Actmix®LDU/GE, with stable perfoamance, non-flammable, non-pollutin, non-toxic and tasteles, do not corrode the mold, non-staining the rubber parts; which are widly application for the Sealing strip, sold and lightweight rubber products, etc.
Rubber Foaming Agent,EPDM Foaming Agent,Pre-dispersed Rubber Foaming Agent,Rubber Foaming Agent ADC-50 Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com
