LDPE (Chinese name: low density high pressure polyethylene): Sensory identification: soft to the touch: white transparent, but the transparency is general, often with tape and printed words. (Note: Tape and printed words are inevitable, but be sure to control their content, as these will affect the price in the market) Identification of combustion: yellow and blue on the burning flame; smokeless when burning, smell of paraffin, melted and dripped, easy to draw. EVa (Chinese name: Polyethylene-ethyl acetate): Sensory identification: soft surface; tensile strength is stronger than LDPE, feel sticky (but no glue on the surface); white transparent, high transparency, sensory and feel similar to PVC film should be noted. Identification of combustion: The same smell of paraffin wax as LDPE when burned is slightly sour; the burning flame is yellow and blue; it is smokeless when burned. Melt dripping, easy to draw. Note: This product is one of the PE types, the price is the same as LDPE, it can be used for regenerating granulation, and the quality requirements are the same as PE. PP (polypropylene): Sensory identification: This product is white transparent and has higher transparency than LDPE. Identification of combustion: When burning, the flame is yellow and blue, smells like oil, melts and drops, and there is no black smoke when burning. PET film (polyurethane) Sensory identification: This product is white and transparent, with a hard touch and a sound when it is smashed. Appears like PP. Combustion identification: there is black smoke when burning, the flame has a flashover phenomenon, the surface of the material is blackened after burning, the black carbon of the finger is burned, and the carbide is powdery. PVC film (polyvinyl chloride) Sensory identification: The appearance is very similar to EVA but flexible. Identification of combustion: black smoke when burning, extinguished from fire, the burning surface is black, no melting and dripping. Nylon copolymer (LDPE+nylon): Sensory identification: This product is very similar to LDPE. Identification of combustion: yellow and blue on the burning flame, smokeless when burning, smell of paraffin, melted and dripped, easy to draw but different from LDPE is the smell of burning hair when burning, pale yellow after burning. Note: Nylon copolymers should not be used for regenerative granulation. Strictly distinguish them from LDPE and strictly control the content in large parts. PE+PP copolymer Sensory identification: Compared with LDPE, the transparency of this product is much higher than that of LDPE. The feel is not different from LDPE. The tear test is very similar to PP film, and it is transparent and pure white. Combustion identification: When the product is burned, the flame is all yellow, melted and dripped, no black smoke, and the smell is like oil. PP+PET copolymer Sensory identification: Appearance is like PP, the transparency is very high, and the sound is louder than PP. Identification of combustion: There is black smoke when burning, the flame has a flashover phenomenon, and the burning surface is black carbonized. PE+PET composite film Sensory identification: The surface of the material is smooth and not smooth, white and transparent. Combustion identification: burning like PET, no melting dripping phenomenon, burning surface black carbonization, black smoke, jumping fire phenomenon, with the paraffin smell of PE. LDPE (Chinese name: low density high pressure polyethylene): Sensory identification: soft to the touch: white transparent, but the transparency is general, often with tape and printed words. (Note: Tape and printed words are inevitable, but be sure to control their content, as these will affect the price in the market) Identification of combustion: yellow and blue on the burning flame; smokeless when burning, smell of paraffin, melted and dripped, easy to draw. EVa (Chinese name: Polyethylene-ethyl acetate): Sensory identification: soft surface; tensile strength is stronger than LDPE, feel sticky (but no glue on the surface); white transparent, high transparency, sensory and feel similar to PVC film should be noted. Identification of combustion: The same smell of paraffin wax as LDPE when burned is slightly sour; the burning flame is yellow and blue; it is smokeless when burned. Melt dripping, easy to draw. Note: This product is one of the PE types, the price is the same as LDPE, it can be used for regenerating granulation, and the quality requirements are the same as PE. PP (polypropylene): Sensory identification: This product is white transparent and has higher transparency than LDPE. Identification of combustion: When burning, the flame is yellow and blue, smells like oil, melts and drops, and there is no black smoke when burning. PET film (polyurethane) Sensory identification: This product is white and transparent, with a hard touch and a sound when it is smashed. Appears like PP. Combustion identification: there is black smoke when burning, the flame has a flashover phenomenon, the surface of the material is blackened after burning, the black carbon of the finger is burned, and the carbide is powdery. PVC film (polyvinyl chloride) Sensory identification: The appearance is very similar to EVA but flexible. Identification of combustion: black smoke when burning, extinguished from fire, the burning surface is black, no melting and dripping. Nylon copolymer (LDPE+nylon): Sensory identification: This product is very similar to LDPE. Identification of combustion: yellow and blue on the burning flame, smokeless when burning, smell of paraffin, melted and dripped, easy to draw but different from LDPE is the smell of burning hair when burning, pale yellow after burning. Note: Nylon copolymers should not be used for regenerative granulation. Strictly distinguish them from LDPE and strictly control the content in large parts. PE+PP copolymer Sensory identification: Compared with LDPE, the transparency of this product is much higher than that of LDPE. The feel is not different from LDPE. The tear test is very similar to PP film, and it is transparent and pure white. Combustion identification: When the product is burned, the flame is all yellow, melted and dripped, no black smoke, and the smell is like oil. PP+PET copolymer Sensory identification: Appearance is like PP, the transparency is very high, and the sound is louder than PP. Identification of combustion: There is black smoke when burning, the flame has a flashover phenomenon, and the burning surface is black carbonized. PE+PET composite film Sensory identification: The surface of the material is smooth and not smooth, white and transparent. Combustion identification: burning like PET, no melting dripping phenomenon, burning surface black carbonization, black smoke, jumping fire phenomenon, with the paraffin smell of PE. LDPE (Chinese name: low density high pressure polyethylene): Sensory identification: soft to the touch: white transparent, but the transparency is general, often with tape and printed words. (Note: Tape and printed words are inevitable, but be sure to control their content, as these will affect the price in the market) Identification of combustion: yellow and blue on the burning flame; smokeless when burning, smell of paraffin, melted and dripped, easy to draw. EVa (Chinese name: Polyethylene-ethyl acetate): Sensory identification: soft surface; tensile strength is stronger than LDPE, feel sticky (but no glue on the surface); white transparent, high transparency, sensory and feel similar to PVC film should be noted. Identification of combustion: The same smell of paraffin wax as LDPE when burned is slightly sour; the burning flame is yellow and blue; it is smokeless when burned. Melt dripping, easy to draw. Note: This product is one of the PE types, the price is the same as LDPE, it can be used for regenerating granulation, and the quality requirements are the same as PE. PP (polypropylene): Sensory identification: This product is white transparent and has higher transparency than LDPE. Identification of combustion: When burning, the flame is yellow and blue, smells like oil, melts and drops, and there is no black smoke when burning. PET film (polyurethane) Sensory identification: This product is white and transparent, with a hard touch and a sound when it is smashed. Appears like PP. Combustion identification: there is black smoke when burning, the flame has a flashover phenomenon, the surface of the material is blackened after burning, the black carbon of the finger is burned, and the carbide is powdery. PVC film (polyvinyl chloride) Sensory identification: The appearance is very similar to EVA but flexible. Identification of combustion: black smoke when burning, extinguished from fire, the burning surface is black, no melting and dripping. Nylon copolymer (LDPE+nylon): Sensory identification: This product is very similar to LDPE. Identification of combustion: yellow and blue on the burning flame, smokeless when burning, smell of paraffin, melted and dripped, easy to draw but different from LDPE is the smell of burning hair when burning, pale yellow after burning. Note: Nylon copolymers should not be used for regenerative granulation. Strictly distinguish them from LDPE and strictly control the content in large parts. PE+PP copolymer Sensory identification: Compared with LDPE, the transparency of this product is much higher than that of LDPE. The feel is not different from LDPE. The tear test is very similar to PP film, and it is transparent and pure white. Combustion identification: When the product is burned, the flame is all yellow, melted and dripped, no black smoke, and the smell is like oil. PP+PET copolymer Sensory identification: Appearance is like PP, the transparency is very high, and the sound is louder than PP. Identification of combustion: There is black smoke when burning, the flame has a flashover phenomenon, and the burning surface is black carbonized. PE+PET composite film Sensory identification: The surface of the material is smooth and not smooth, white and transparent. Combustion identification: burning like PET, no melting dripping phenomenon, burning surface black carbonization, black smoke, jumping fire phenomenon, with the paraffin smell of PE.
Heheng technology can provide many kinds of fasteners with good quality, such as dry wall screws, self-drilling screws, plastic staple and so on. What's more, we can provide service of agent, if you are interested in any kind of products, we can help you to find it based on our extensive domestic sales network.
Drive Pins,Dn Drive Pin,Nk Drive Pin,Eyelet Pin Yibin Heheng Technology Co.,Ltd , https://www.actuated.nl
