The LED tubes emergency kit is making your LED tubes into Emergency Mode, ideal for LED tubes 3-40W Full power emergency output wattage for LED emergency lighting 60-180mins. Automatic lighting up when main power failures. Suitable for LED fitting with external led driver and internal driver. Widely using for parking lot, office, building, warehouse, school, hospital, workshop etc. Emergency Led Tube,Led Tubes Emergency,Led Tubes Emergency Kit,led tube light with battery Foshan Nai An Lighting Electric Co.,ltd , https://www.articalight.com
First, the color of stainless steel maintenance methods are as follows:
1. In the ordinary course of use, the door should be opened and closed slowly, so that the damage of the stainless steel door protection layer caused by collision with other sharp and sharp objects can be avoided.
2. When using the stainless steel door in a relatively humid environment for maintenance, pay attention to the condition of the stainless steel door caused by oxides and microorganisms. Because of the dust in this environment, it is filled with acid gases.
3, stainless steel door surface dirt can be used for soap, detergent or warm water rinse, can not use detergent containing chemical components, avoid the use of bleach and so on. The trademark and film on the surface of stainless steel are washed with warm water and weak detergent; the adhesive component is scrubbed with alcohol or organic solvents (ether, benzene).
4, some families will use stainless steel doors in the kitchen. The stainless steel door in the kitchen is very easy to be stained by fumes, and the fume is a kind of dirt that is more difficult to manage, but as long as you find a suitable solution, you can still do more with less. How can the oil be quickly removed without damaging the stainless steel door? Wipe clean with a soft clean cloth, then use neutral detergent or ammonia solution or special cleaning agent to clean, and finally wipe the stain with a wet towel, and then wash it again with water.
5, stainless steel surface with bleach and various acids attached to, immediately rinse with water, and then dipping ammonia solution or neutral carbonated soda, washed with neutral detergent or warm water.
6ã€Stainless steel door surface has rainbow pattern, which is caused by excessive use of detergent or oil. When washing, it can be washed away with warm water detergent. Stainless steel rust can be used with 10% nitric acid or grinding detergent. It can also use special cleaning stainless steel. Shuangfei powder, rust-proof cream to clean stainless steel door!
Second, no fingerprints and special stainless steel plate
1. The color stainless steel door is very difficult to clean, especially when rusting. Do not use detergents, steel balls, abrasive tools, etc. that contain bleaching components and abrasives. Do not use anti-rust pastes (because the principle is to use the small particles to remove stains or rust. Color plates will remove the plating layer). , And it should be noted that the material of the stainless steel door is mirror or drawing, if the mirror must pay special attention to the cleaning tool, the rag must be clean and dustless. In addition, stainless steel cleaners have special cleaners called stainless steel cleaners or stainless steel brighteners. The removal of liquid rust can remove stains and restore stainless steel light.
2. Small scratches or scratches on the surface can be drawn with the same color pencil.
3, if covered with fingerprint-free film, do not use degumming water or any rust to wipe, will corrode the surface of the plate
Teach you how to maintain stainless steel
The surface of the stainless steel door has a good passivation film which is resistant to corrosion and is mainly used to isolate oxygen from the air and prevent rusting. However, the stainless steel door is not rust-free, and the electrochemical reaction or chemical reaction occurs on the metal surface exposed to the corrosive environment and is uniformly corroded. Among the passivation films on the surface of the stainless steel door, there is a weak corrosion resistance. Due to the self-excited reaction, pitting reactions are formed and small holes are generated. Together with chloride ions, strong corrosive solutions are formed to accelerate the corrosion reaction. There is also intergranular corrosion cracking inside the stainless steel, all of which have a destructive effect on the passivation film on the stainless steel surface. Therefore, in the process of use, due to different materials, improper protection may affect the appearance of stainless steel doors.