The main forming methods of flat glass are manual molding and mechanical molding. Hand molding There are mainly blowing, smashing, and blowing methods. These methods have been gradually eliminated due to low production efficiency and poor glass surface quality, and are only used when producing art glass. Mechanical forming There are mainly calendering, slotted vertical lead, counter roller (also known as Asahi), slotless vertical lead, flat pull and float. The calendering method is produced by rolling and annealing a glass liquid in a melting furnace by a calender roll, and is mainly used for producing a wire (net) glass and an embossed glass. The processes of slot vertical introduction, roll method, and slotless vertical introduction are basically similar. The glass is passed through the trough brick or roller, or the brick is fixed by the guide brick, and the glass is placed on the asbestos roller. The belt is pulled up, and the flat glass is continuously produced by annealing, cooling, and continuous. The flat pull method is to turn the glass vertically into the horizontal direction by means of a steering roller. These methods were common slab glass production processes before the 1970s.
LED Therapy Light High Power, include 3 wattages, 300w 500w 1000w, 300w with 50pcs led, 500w with 1000cs led, 1000w with 200pcs led.
Why use led therapy light?
Red light therapy is a skin care treatment being offered as an alternative to physician-administered laser therapy.
Nost studies is involving red light therapy revolve around the treatment of acne, and of its ability ti get rid of wrinkle, while research is not yet conclusive on the benefits of red light therapy, studies suggest that concentrated red light is absorbed y the mitochondria in the cells and stimulates the generation of more collagen.
Red Light Therapy ,Rechargeable Led Face Light,Led Therapy Light,Red Light Infrared Full Body Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.szwenyigrow.com