Xi'an decoration classroom decoration knowledge Daquan

Xi'an Decoration Classroom Decoration Knowledge Encyclopedia Second, the main wall decoration wall decoration materials are latex paint, spray paint, wallpaper (cloth), ceramic tile, wood veneer, stone paint, plaster template. There are first steps in the process of wall decoration, but it is certain that the tile finish must be done after the ceiling, while latex paints and other easily contaminated, it is usually done in the back.
(1) Latex paint Latex paint is a very popular decoration material and is currently the mainstream material for wall treatment. It describes the principle of the original paint layer treatment before the latex paint is applied.
(1) The wall of a new house generally only needs to be polished with coarse sandpaper, and it is not necessary to remove the original paint layer.
(2) The walls of ordinary old houses generally need to be removed from the original paint surface. The method is to wet the surface with water first, and then remove the surface paint with a trowel or electric planer.
(3) For old disrepaired walls, the surface has been severely peeled off, and the hot layer is chalky. It is necessary to remove the lacquer layer and the entire batch of hot layers until the hot cement or brick layer is seen. Then use the double-flying powder and cooked rubber powder to mix and hit the bottom and flatten it, then paint the latex paint.
The surface layer must be painted two or three times, and the interval between each pass is preferably 24 hours.
What needs to be reminded is that many industrial coatings have more or less toxicity. Attention should be paid to ventilation during construction, and it should be possible to stay at the top after construction for a week to avoid endangering the health of the family.
(2) Spray coating is a brushing method for water-soluble paints. Using the characteristics of oil-in-water, a pressurized spray gun is used for construction. Can form a variety of color textures, the effect is elegant and three-dimensional.
The main advantage of the spray construction method is rapid construction, which can greatly shorten the construction period. The disadvantage is that it is difficult to maintain at a later stage and it is easy to injure the entire surface due to a small part of it. Unless it is treated in large areas, it cannot be restored to its original shape.
In addition, it should be noted that if the metal surface is sprayed, it is best to use metallic paint (magnetic paint).
The use of three wallpaper wallpaper is quite common, mainly paper wallpaper, chemical fiber wallpaper, plastic wallpaper. The cloth wallpaper is generally called wall cloth, not classified as wallpaper.
Wallpaper can be printed patterns, patterns change, rich color, and the construction is convenient and fast.
The most critical technique for the construction of wallpaper is mildew proofing and stretching:
(1) Mildew treatment. Before the wallpaper is posted, it is necessary to treat the base surface first, and the flying powder and the cooked rubber powder may be used to perform batch heating and leveling. After it has dried, apply a varnish one or two times and then post it again.
(2) Scalability treatment. The scalability of wallpaper is an old problem. To solve it is to start with prevention. Must reserve 0.5mm weight layer. It is not appropriate for some people to unilaterally pursue aesthetics and eliminate this overlap. In addition, try to buy some good scalability wallpaper.
(D) tile tiles, is a major project in the current decoration. Tiles are mostly used in kitchens, toilets, balconies and other places. The biggest advantage of tile decoration is dirt resistance.
One of the major problems in the decoration of tiles is the treatment of the waterproof layer. Because there are problems with water in most places such as kitchens, toilets, etc., waterproofing of walls should be highly regarded.
New houses that are not waterproof or old houses that need to replace tiles need to be re-waterproofed. The main methods of waterproof layer treatment are:
A professional waterproof agent such as 911 water repellent should be used below 1m above the ground and walls. The location of the wall above 1m can be selected to use a bit of bitumen to waterproof. If you are not economically plentiful, you can also use asphalt or resin to make the floor waterproof. The ground and wall must be thicker than 20cm.
The new house is made of waterproof layer. After construction, it should be noted that the inspection surface should have no voids. After the old house is demolished, you need to do a simple cement batch heat before you can make a waterproof layer.
After tiles have been damaged, care must be taken when they need to be repaired. If the position is low, it is possible that the waterproof layer will break when it is removed. Before the new brick is installed, the waterproof layer is also repaired before the tiles can be tiled. After finishing the renovation, try to avoid drilling holes in places below 1m in height.
(5) Wood veneer wood veneer is now a high-end decoration method. Generally, 3 mm veneer is attached to the 9 mm base plate, and then fixed with a mosquito Screw. The wood veneer can be used for various shapes and has a variety of natural textures, which can bring gorgeous effects to the interior.
Because of the different designs, details cannot be described here, but it is important to note that: wood veneer practices, like Chinese painting methods, must be “left blank”. The idea of ​​wrapping all the walls in planks is not rational. Apart from increasing the project budget, it does not help the overall effect.
No matter what kind of decoration, we must keep the surface clean. After the veneer is bought into the market, varnish should be applied again as a protective layer.
The use of veneer decoration in wood veneer may not be a technical issue, but if plywood is used or painted on the surface (contaminated oil), it may be resistant to cracking.
The way to prevent cracking of wood finishes is:
(1) The joints are to be treated at an angle of 45° and the contact points form a triangular groove.
(2) Fill the tank with putty putty and apply a tacking bandage.
(3) Criticism of surface-stitching, followed by other lacquer treatments (sweeping paint or mixing oil)
The nails used to fix the wood veneer must use mosquito studs. When the surface layer is treated, it can be filled with a coloring putty.
(6) Stone-decorated stone-decorated walls are high-end renovations, and they are generally made of imported marble, with a high cost. Stones (except for roughfaced stone and culture stone) can be used in public areas such as entrance halls, halls and aisles.
Stone decoration in the wall decoration is mainly divided into wet sticking method and dry hanging method.
1) Wet-stick method. The same as the laying of the tiles, please refer to the construction part of the tiles for the specific construction method.
2) Dry hanging method. It is a popular practice in the construction industry. However, since the dry hanging method requires extra space, interior decoration with a smaller area is less used. Its methods and precautions are:
(1) Slot first at the edge of the slab. The size of the groove depends on the specifications of the pendant.
(2) First install the light steel structure with galvanized expansion screws. When the structure is installed, it should be straight and flat.
(3) Install the pendant and install the slate, then put the glass glue on the edge seam.
Third, the ground decoration In the project, the cost of ground decoration accounted for a considerable proportion, so everyone is very concerned about. The materials for home floor decoration mainly include tiles, solid wood floors, composite floors, and stone (marble and granite); carpets are used relatively less.
(a) Some tile owners have little attention to the laying of tiles in addition to the selection of tiles. In fact, there are still some things that need attention.
First of all, the ground should be tied. There are some uneven ground on the civil construction, and uneven areas should be paved with cement mortar. If the floor area is large when laying, you can make some mosaics, or you can use different colors of the tiles (darker) to frame the surroundings, and the tiles in the frame use lighter colors. Of course, the floor of the kitchen and toilet must have a slope, so that it is convenient for drainage.
When laying tiles, be sure to pay attention to stay. Tile joints are not only used to deal with the problem of incomplete specifications, but the main thing is to leave the place for thermal expansion and contraction.
Now some speculation about the so-called seamless tiles, consumers need to pay attention. Do not say aside the decoration, we know from the physical point of view. Most of the tiles are constructed in a relatively closed space. Take the wall for example. Generally, the left and right sides are closed with fixed walls and floors. If tiles are processed seamlessly during construction, where do they stretch when they are inflated? Obviously, one of the prerequisites for the realization of a seamless tile is that the thermal expansion and contraction rate of the tile is zero. We know that this possibility is zero. What are the consequences of forced seamless processing? Tiles can't be hot or cold to push down a wall, because the adhesive strength on the back cannot be greater than the force pushing the wall. The result is only the same: the tiles arch.
Unless you have full confidence in the level of workers' construction techniques, try not to use floor tiles whose size exceeds 900mm × 900mm. Such large bricks are prone to contain a lot of air in the middle of construction, and will easily cause a series of problems in the future.
Tiles left joints, wall to 1 ~ 2mm as well, some small bricks (100mm × 100mm) in order to stay beautiful but need to be large.
Floor seams, in addition to retro tiles need to leave a larger gap (5 ~ 10mm), other bricks generally 3 ~ 10mm as well.
For families with elderly people in their homes, when choosing materials for the ground, try to use less polished tiles and vitrified tiles that are too slippery. Otherwise, the accident will be worthless.
After the tile is laid, the owner should understand how to accept it. The key to acceptance is two words: "flat, straight." First, choose a place (for example, four 600mm x 600mm bricks), lower the horizontal ruler diagonally, across two diagonal bricks to see if it is flat, and then measure every two pieces. Left and right adjacent bricks. If it is flat, the water droplets in the middle of the level should be in between (this method is not applicable to the kitchen and toilet). The last is to see if the corners are straight. If your choice of material is good, this method can determine the level of masons.
(b) The laying of stone stones is the same as most of the tiles. But also need to pay attention to: stone laying, to ensure adequate stone cement mortar on the bottom, construction should be light pressure so that the air discharge. If you leave air, the stone will loosen in the future.
In addition to the marble and granite that we often see, stone materials that are frequently used in decoration include pebbles and rain.
Pebbles are elliptical small stones that have washed through millions of years in a flat bed. Rainstone is actually a kind of cobblestone. Traditionally, we call a stone with a beautiful pattern texture. A kind of cobblestone used in the decoration. With a special kind of repose and repose, perhaps it has local flavor.
(3) Laminate flooring is a variety that has only been imported from foreign countries in recent years, and it is also known as reinforced flooring. From the market, mainly Germany and other European countries, but the majority of the current production is in the country. Composite flooring is actually a pure industrial product.
Laminate floor laying generally does not have any special requirements. However, because there is no fixed point in the middle of the composite floor, the large area will cause the problem of the overall arching. Therefore, when laying, the partitions should be set appropriately, and the aluminum (copper) strips should be used in the middle to reduce the effect of thermal expansion and contraction ( 4) Solid wood flooring Solid wood flooring refers to the wood finished products made of solid wood and used for laying on the ground. Red oak flooring, gold ivory flooring, maple flooring, teak flooring are all examples of this. On the market, there are two types of names, "original wood flooring" and "solid wood flooring."
Wood floor is based on the specific gravity to determine its hardness, the harder the more wear-resistant. In general, the darker the color, the higher the hardness.
The quality of wood flooring is determined according to the following criteria: 1 The surface is uniform, uniform in color and less in appearance (eyes). 2 specifications are consistent. Wood floor length is generally 750,450,300mm and other specifications. The author proposes to use a 450mm wood floor, which can choose a balance between aesthetics and reducing the long and easy arching. The longer the wooden floor, the easier it is to arch.
The solid wood floor is covered with wood floor. Whether it is plain or painted, be sure to remove the packaging before laying and then dry it in a ventilated environment. At least 3 days to 1 week is required to adapt the wooden floor. The microclimate of the factory to the renovation site. The method of drying is: 1 Disassemble all the packages. 2 The disassembled solid wood floor is in a "well" shape, and the height should not exceed 1m.
The following describes the two solid wood flooring laying method, belongs to the author's personal approach, for reference only.
1) Plain wood floor laying method.
(1) Make sure the floor is flat. You can determine it by ground leveling. The main thing is to calculate whether the floor will hinder the opening and closing of the door. According to the author's laying method, the total height of the wood floor is 27mm. Uneven ground, pre-cemented with cement.
(2) Clean the floor to make sure the floor is dry. If cement is approved in advance, it must wait for the cement to dry out.
(3) Apply a layer of Lek oil layer. Asphalt oil is sold on the market and there is no need to use bitumen blocks for melting. This is done to prevent moisture and insects.
(4) playing floor: generally use high quality 9mm fine core board can also be used 12mm. The 9mm board is cut into four pieces by cross halving. There must be a 10mm gap between each small piece to be used to drill wooden pegs after being drilled on the ground; then nails are inserted into the pegs to make the board and the ground. fixed. Note: It is not advisable to use density plates or large core plates for the base plate.
(5) Set plain wood flooring. With nails on the four sides of the board, the number of pins on one side of the long side is four, and two on the side of the short side. Note: It is best to use 903 glue for laying wooden floors; there is a big problem with white latex (107 glue), because white latex is water-based, and too much will cause the wood to swell. Remember: You can't put the floor you just brought into the construction site immediately for laying. At least you need to dry the site for 3 days. When the solid wood floor is laid, keep a distance of 10 mm from the surrounding wall (excluding the lintel). This gap can be covered by the baseboard at a later stage (the gap should not be filled and the skirting line should not be inserted into this gap).
(6) Continuing other construction projects (such as baseboards, etc.), allow the floor to be laid for a few days, but it may be shorter or longer but not less than 5 days.
(7) Grind the floor. At least three times. The wood powder polished after the second time must be retained.
(8) The remaining wood chips are adjusted to fill the space between the boards.
(9) After laying for a good day, thoroughly clean the floor surface with a clean towel, preferably with a vacuum cleaner
(10) Apply wood floor paint at least three times.
Matters needing attention: This construction method takes a long time, so when the schedule is arranged, it can be arranged in advance. Since the wood floor needs to be polished after installation, it can be mixed with other types of work before the floor is ground. It is not afraid to stain the floor.
Process Effectiveness: This type of construction method was first adopted and constructed in 1997. No arching or deformation has been seen on the ground so far.
2) Lacquer wood floor laying method.
(1) ∽ (4) Same as above.
(5) Laying painted solid wood flooring. With nails on the four sides of the board, the number of pins on one side of the long side is four, and two on the side of the short side. Lacquer wood flooring laying, banned the use of glue (except Wan glue, but can not). The gap with the surrounding wall is the same as above.
(6) Clean paint, especially sand grains! Because these sands can cause great wear on the paint surface.
(7) Install the foot line and give the paint on the foot line (painted wood floor does not need to be painted again).
Precautions: Add moisture-proof film under the floor. This approach has two advantages: 1 Because the paint plate can not be worn, the damp-proof film has the effect of adjusting the leveling. 2 can increase the moisture resistance of solid wood flooring. This method also has drawbacks: it is not conducive to ventilated floor ventilation, long-term moldy phenomenon will appear on the floor.
Process Effectiveness: This type of construction method was first adopted and constructed in 1998. No arching or deformation of the ground has ever been seen.
3) Comparison of board and lacquer board laying methods.
(1) After the construction, the surface flatness is better than the paint plate.
(2) The lacquer board is faster than the board and the duration is reduced by more than half.
(3) The board is difficult to seal on six sides and the moisture resistance is less than that of the paint board, but the difference between the two is not great.
Four entrance decoration entrance, also known as the entrance hall. Many people have misunderstood this and think that the entrance is a screen. Actually, the entrance is another name of the hall.
Here we have to explain that the entrance is not necessarily done. It depends entirely on whether your house needs it. The entrance can be a closed, semi-closed or open space. It refers to the area near the gate.
The concept of the entrance was derived from China, but the earliest use may be Mr. Feng Shui. Entrance, mysterious, key meaning.
(A) Decoration There are two ways of entrance decoration: hard entrance and soft entrance.
1. The hard entrance is divided into a full partition entrance and a half partition entrance.
1) Completely cut off the entrance. Refers to the design of the entrance is full-scale, from the ground to the top. This partition is designed to block sight. The considerations for this design are: 1 Does your design affect the natural light at the entrance? This is critical. If this design causes the light in the foyer to be dark, then it will be superfluous. 2 Does this design create a sense of space? This is also worth noting.
2) Partitioned entrance. Refers to the entrance or half of the design in the horizontal or vertical direction. This design will, to a certain extent, reduce the squat of the above-mentioned full-separation portal.
The semi-partitioned entrance may also use glass in the transparent part, even if it is from the ground to the top, because it is visually half-isolated, it is still divided into half-blocked areas.
2. The soft entrance is a method of dividing the area on the basis of the plane processing of other items.
1) Smallpox division. The location of the hall can be defined by the difference in the shape of the ceiling.
2) Wall partitioning. The location of the hall can be defined by the difference between the wall treatment and other adjacent walls.
3) Ground division. The location of the hall can be defined by the difference in floor material, color or height.
4) Shoe cabinet division. The position of the hall can be defined by the horizontal yaw blocking and the vertical extension.
(b) The classification of the entrance and decoration principle entrance, that is, the decoration of the hall, according to their own style requirements, choose one or more of the above to deal with. However, the principle of processing is nothing more than the following aspects:
(1) Maintain consistency with these public spaces, such as the living room and the restaurant.
(2) Maintain a reasonable traffic line to avoid affecting the use of normal functions due to the design of the entrance.
(3) The entrance design should not be more complicated than other public areas.
(4) The entrance should be functional, then it is decorative.
(5) Don't force the setting if you don't need the entrance.
Here are some common types of entrance halls and suggestions for reference;
1) Detached foyer. The hallmark of this hallway is that the hallway is originally an independent building space or a turning aisle. Therefore, for the interior designer, the main function is the use and decoration of the function.
2) Passage hallway. The hallmark of this hallway is that the entrance hall itself exists in the form of a "straight through passage." For such hallways, how to set up shoe cabinets is the key.
3) Virtual foyer. The hallmark of this hallway is that there is no hallway in the building itself and only a part of the living room or restaurant can be used as a hallway. In this case, you have to consider whether you need to use the entrance. The reasons for needing to do entrance are as follows: 1 The door can directly look into the position of the sofa in the living room; 2 The door can look directly into the bedroom door; 3 The door can look directly at other areas that are not suitable for direct viewing by outsiders.
Five living room decoration living room, on a professional level, refers to a place dedicated to guests. Due to the limitations of our national conditions, the role of the living room and the living room is often mixed in architecture. In other words, the living room of most people in our country is a function of both the reception of guests and daily life. Of course, some economically affluent families will also have special and living rooms and special living rooms. Since the two are similar, they only have different roles. Therefore, they are introduced here together.
(a) The basic requirements for living room design can be said that the living room is one of the most frequent activities in the home, so how to dress up this space is particularly critical. In general, the living room design has the following basic requirements:
1) The spaciousness of space. In the design of the living room, creating a spacious feeling is a very important matter. Regardless of whether the space is large or small, it is necessary to pay attention to this in interior design. The spacious feeling can bring relaxed mood and joyful mood.
2) The highest space. The living room is the most important public event space in the home, regardless of whether it is artificial ceiling. Both of these must include the use of various optical illusions.
3) Optimization of the landscape. In the interior design, it must be ensured from which angle the living room is seen to have a sense of beauty, which also includes the optimization of the outdoor landscape seen from the main viewpoint (sofa). The living room should be the most beautiful or personalized space in the whole house.
4) The brightest lighting. The living room should be the brightest place for the entire room light (regardless of natural lighting or artificial lighting), of course, this light is not absolute, but relative. Perhaps in some practical activities, such as watching TV, you do not need very bright light. However, in other daily living activities, the light is indispensable.
5) Popularization of style. Regardless of the personality or aesthetic characteristics of you or any family member, you must ensure that the style is acceptable to the public unless you usually have no friends or family. This kind of popularity does not mean that the decoration is ordinary, but it needs to be designed to be harmonious and more acceptable.
6) Generalization of materials. In the decoration of the living room, you must ensure that the finishing materials used, especially the floor materials, can be suitable for most or all family members. For example, laying too smooth tiles in the living room may cause harm to the elderly or children or hinder their actions.
7) Optimization of traffic. The layout of the living room should be the smoothest. Whether it is a side-through living room or a middle traverse style and living room, you should make sure to enter the living room or through the living room. Of course, this guarantee is formed under conditions that allow it.
8) Applicability of furniture. The furniture used in the living room should consider the applicability of family activities and the applicability of members. The main consideration here is the role of the elderly and children. Sometimes we have to make some concessions for their convenience.
(b) The few living rooms that you must pay attention to are the top priorities of the whole house. If you want to show a certain style, then the most worthwhile place for you to spend is the living room. It is one of the never-ending pursuits of interior designers. It is also a center of interest for home decoration.
In the actual interior design, many homeowners will be confused with too many personal factors. Of course, the reasons are also very sufficient: "I live here, not a designer residence." But as a relatively public space It is necessary to maintain proper "publicity."
1) The placement of the sofa should consider two factors:
(1) Is the landscape from the sofa looking out?
(2) Can the entrance see the front of the sofa?
2) Placement of the TV. Need to consider the issue of reflection. The height of the TV cabinet should be suitable for people to sit on the sofa and look flat at the center or low point of the TV screen.
3) TV cabinet background decorative wall, talking about the living room, can not help but talk about another common living room decoration items: TV cabinet background decorative wall.
TV cabinet background Decorative wall There are many decorative materials available, wooden, natural stone, artificial stone and cloth. For TV backdrops, what material is used is not very important, because this part is generally rarely touched. The main thing is to consider the beauty of this part of the model and the impact on the entire space.
(1) If the video wall has a central tendency, consideration should be given to the center of the television.
(2) If the video wall has a tendency to be left or right, then it should be considered whether it is necessary for the back wall of the sofa to be shaped like a similar element. In general, this echo is axisymmetric.
After considering the above points, before you make any decision, do not forget to discuss with your designer so that the program can be satisfied with both parties. This can increase the success rate of the plan. It should be noted that the design is never done. In retrospect, any popular or backward style is temporary.
Sixth, the decoration of the restaurant decoration restaurant, for the entire home improvement project, is not a big project, and its decoration is relatively difficult.
The main points of restaurant decoration mainly focus on the following aspects:
1. Color matching The color matching of the restaurant is generally with the living room, which is mainly considered from the perspective of the sense of space, because at present most of the domestic housing design, the restaurant and the living room are the same. For the unique structure of the restaurant, the use of color, warm colors should be used, because from the perspective of color psychology, warm colors help to promote appetite, which is why many restaurants use the yellow and red series of reasons.
2. The style of the restaurant The style of the restaurant is decided by the tableware. Therefore, in the early stage of the decoration, the style of the table and the dining chair should be determined. One of the most prone to conflicts is color, ceiling shapes, and wall decorations. In general, their style corresponds to this:
1) Glass dining table. Corresponds to modern style, simple style.
2) Dark wood dining table. Correspond to Chinese style, simple style.
3) Light wood dining table. Correspond to natural style, Nordic style.
4) Metal carved dining table,. Corresponds to traditional European (Western European) style.
5) Concise metal dining table. Corresponds to modern style, simple style, metalism style.
3. The choice of dining table The choice of the dining table needs to pay attention to the size of the space, and a small space with a large dining table or a large space with a small dining table is not suitable. Due to the actual problem of purchasing, it is difficult for buyers to get their products to the scene for comparison. Therefore, after measuring the preferred size of the table, you can get a full-scale comparison at the site. This would be more appropriate and avoid too much. small.
4. The choice of table cloth The table cloth should be cloth-based, and there are many options available on the market. When using plastic table cloths, when placing hot objects, the necessary thick pads, especially glass tables, may cause unnecessary thermal cracking.
5. Dining table and dining chair with matching dining table and dining chair are generally supporting, but also can be purchased separately, but need to pay attention to ergonomic problems, such as the difference between the height of the chair to the desktop is appropriate to about 30cm, too high or too low Both will affect normal posture; the backrest of the chair should feel comfortable and so on.
Seventh, bedroom decoration Bedroom is the most important place we live in, but also the main function of home. Tranquility and ease are the main tone of most bedrooms. As it belongs to the private space, it is a place to express individuality and it is worthwhile to decorate and decorate it. Based on the particularity of the bedroom, there are some special requirements for its decoration.
(i) The privacy features of the privacy bedroom are reflected in two parts:
1. Invisible privacy requires it to have more stringent protection measures, including the strictness of the door leaf and the tightness of the curtain.
(1) The material used for the door leaf should be as thick as possible. It should not be directly closed with a 3mm or 5mm plate. If 5mm or plate is used, a 3mm panel should be applied on the plate. (2) The lower part of the door leaf should be kept at 0.3~ from the ground. 0.5cm.
(3) The curtains should be made of thick fabrics; if they are thin curtains, a layer of screens should be added. This is beneficial to enhance the privacy of the bedroom and reduce the interference of light during sleep.
2. Do not listen to privacy This requires the bedroom to have a certain degree of sound insulation. In general, the soundproofing of the partition walls is sufficient, but some owners have space-based considerations. They like to knock out the partition between the two houses and then put on a two-way or one-way wardrobe. Need to pay attention to sound insulation.
(b) The decoration of the color matching bedroom, due to the difference in the main body of residence, the color matching is not the same.
1) Master bedroom. The main tone should be warm and the floor should use wood floors. It does not rule out the use of certain styles of color matching when both husband and wife have the same aesthetics.
2) The second bedroom. The same should be based on warmth, the second bedroom is generally old people living, decoration should take into account the convenience and preferences of the elderly.
3) Children's room. Use some more lively colors. The more common color scheme is a blue tone for boys' rooms and a pink tone or beige tone for girls' wards. You can also use some wallpaper with cartoon animals or flowers and plant patterns. Children's rooms can also have more toy racks. Children's rooms can use wooden floors, which is conducive to children's climbing but not to catch cold. If you do not have the conditions to set the wooden floor, you can also use children's pads, these pads are mostly colorful, there are some puzzle patterns or letters.
4) Babysitting room. Generally do not need to do too much decoration, handle the wall, floor, top surface can be.
(C) lighting bedroom lighting requirements are not many, but it should be noted that the bedroom should not use the downlight of the lamp, it is appropriate to use the top lighting. However, if the ceiling light is made of incandescent lamps, it may cause yellowing on the top surface of the lamp (this is baked out).
If lighting fixtures are not on the top but on the floor, this restriction can be avoided. But now, for home use, fewer and fewer wall lamps are used. One of the main reasons is that the wall lighting has a narrow range of lighting, and the second is that there are relatively few styles.
(d) Environmental protection is an issue that must be mentioned in relation to other spaces. The bedroom was relatively closed, and the second place had more furniture. We have repeatedly mentioned the environmental issues of materials in other chapters. The material inside is very important, as well as the ventilation. The new bedroom should be well ventilated after it has been renovated. At the same time, the newly purchased furniture should also open the doors and drawers for air dissipation.
(5) Space Usually, the bedrooms are small and there are many things to be displayed, so the problem of space crowding often arises. To solve this problem, there are several tips:
(1) Wherever possible, the cabinet that meets the ceiling is placed on the same wall as the door, or invisible when standing in the doorway,
(2) For cabinets that are visible at the doorway, the height should not exceed 2.2m.
(3) The space layout should be as blank as possible, that is, enough empty walls must be left between the furniture.
(4) Decorate decorations as small as possible. For example, decorative painting can use some small ones.
(6) The bed of the bed is the most important and basic furniture for the bedroom (Of course, if you are paving a Japanese-style tatami bed, it is not a separate story) The principle of bed placement is described in Chapter II “11. Do It Yourself” "Design of bedroom".
VIII. Kitchen Decoration There are many disputes related to the decoration of the kitchen. The following analysis of several related issues:
1. The kitchen is open or closed.
Some friends have become interested in the open kitchen after referring to some Kitchenware company's kitchen model or pictures. A friend from a foreign country also talked about this matter with me. I only asked him a simple question: What is the difference between Chinese food and western food?
In fact, everyone is extremely fooling when they look at those pictures. Most ceramic tile suppliers have pictures of more than ten or twenty square meters of partitions (note that they are not walls), and the area of ​​the former domestic kitchen is about 6m. The larger ones generally do not exceed 8m. . Due to different lifestyles, Western foods are often cooked using methods such as simmering and roasting. Chinese food is often fried and fried, with a lot of fumes. Therefore, unless you are a friend who likes to eat western food, you still use the enclosed kitchen honestly; if you like open-style, of course, you can use glass to cut off, at least to meet the psychological needs of it.
2. Kitchen Countertops At present, kitchen countertops are decorated with natural stone (marble or granite) and artificial stone. Both surfaces can be used with three-knife materials. Natural stone has fine pores on the surface, so it is relatively poor in terms of stain resistance; artificial stone is generally insufficient in naturalness, and textiles are relatively fake.
It is important to stress here that the quality of artificial stone in the market is very different. In general, the quality of imports is better. In the past two years, there have been a large number of domestic goods, although the quality has improved over the previous years, but many still can not get through. Foreign man-made stones can be treated with sandpaper to scratch the surface of the lines, but most of the man-made stones made in China are worn out.
3. Kitchen kitchens should be as cool as possible, and they should be lighter in color. Because the kitchen is relatively hot, if you use warm colors, you will feel that the room temperature is high or low. I personally like to use white, neat and clean, and the white brick wall, but also conducive to the kitchen cabinet body color matching.
4. Waterproof Problem Kitchen waterproofing is mainly to pay attention to the position of the sink and the inclination of the ground. The key to the former is to make the interface waterproof. Some people think that using a modular kitchen can avoid this problem. In fact, if you use plywood as a kitchen cabinet, you will be able to breathe and breathe when receiving water. In combination, the receiving water will expand, and the rear surface of the fire board will detach. .
The floor of the kitchen must be a 10cm brick counter (the skirting board of the combined kitchen cabinet is now made of stainless steel or pvc). This is my advice. Waterproof is the most effective.
The kitchens in many places in the north are not waterproof. Because of the problem of living habits, the kitchens in the north do not even have floor drains. Waterproof treatment of kitchens in the southern region is described in the section “9. Waterproof treatment” in the next section “Nine, bathroom renovation”.
5. Selection of materials for kitchen vertical planes (1) 300mm×300mm square flat aluminum buckles are recommended for kitchen ceilings. It is not recommended to use other materials such as PVC, plastic, or strips because it is easy to deform downwards. Kitchens should not use commercial waterproof gypsum board and other materials.
(2) Glazed tiles with a glossy finish are preferred for kitchen wall tiles. In the absence of designer guidance, white, creamy white, dark brown tiles, and tiles that are too dark are not acceptable.
(3) Kitchen floor tiles must use non-slip tiles because the kitchen will be greasy even without water.
6. The choice of lamps and lanterns The lamp of the kitchen should adopt the ceiling lamp with the cover body, at present the market also has a kind of embedded lamp pan with glass cover (similar to the kind of office building).
Nine, bathroom renovation bathroom was purely a "convenience" and scrubbing place, and now more and more people dress it up beautifully.
1. Colors and Materials The color tone of the bathroom can be any color, as long as you deal with the problem of the mix of colors. It is recommended that you use light dark colors for the best results. After a long period of practice, I think that using black, dark green and dark blue in home decoration is more likely to feel dirty, so be sure to use white.
The bathroom material selection includes:
1) Smallpox. A square aluminum plate with a hole of 300 mm x 300 mm is preferred, which can prevent water vapor from accumulating on the plate to form an unsightly stain.
2) Wall surface. Can be a variety of materials, but only one prerequisite: to waterproof. Glazed tiles, natural stone, mosaics, etc. can be used, but sandstone-like stones cannot be used, and even if surface waterproofing is done, do not consider it.
3) Ground. The principle of choice is the same as the kitchen.
2. Doors and Door Frames I found that many designers, including some designers in Hong Kong, prefer to use wooden doors for kitchen renovations. However, I found that there was a problem that the lower part of the door was soaked when the project was completed.
There are several ways to solve this problem:
(1) Choose materials that are not afraid of water, such as PVC doors, aluminum doors, or stainless steel doors. However, when using PVC, it is not possible to use ordinary PVC but to use thick-walled ones. Now there are some PVC doors only need about 100 yuan, the quality is terribly bad, and it will be deformed and crooked at every turn. If you have ABS on the market, you can also consider it.
(2) Handle the lower part of the wooden door frame. The specific method is to apply this part of foam oil (varnish or varnish) treatment.
(3) The lower part of the wooden door frame is made of waterproof material such as stainless steel.
2. Bathtub selection The specifications of the bathtub are generally above 1400mm, including 1500mm, 1600mm and 1700mm. Currently, there are several kinds of cast iron, acrylic and steel bathtubs on the market. Cast iron is more expensive but durable; acrylic is the cheapest but least durable; steel is in a medium position. Most of the surface of the enamel cast iron is smooth, relatively wearable, and the acrylic is not wear resistant. After some time, the surface is prone to gray scratches.
When buying a bathtub, pay attention:
(1) Carefully check the smoothness of the surface, especially the cast iron and steel bathtubs, the surface of which is enamel, the good surface is smooth, and the poor surface has ripples.
(2) 有的浴缸还有一些附加的功能,例如按摩水流等,这些就必须按自己的需要而定。
(3) 浴缸还分单人型和双人型。购买哪一种,要根据卫生间的实际大小和个人的爱好而定。
(4) 购买时应同时配备好安装的水管配件。
3.马桶目前国内马桶的质量差异最主要是在冲水配件部分。它们主要分为铜制件、ABS工程塑料件、普通塑料件和PVC件。由于国家对节水的要求,目前,最耐用的铜制件已经退出市场,占主导的是ABS件。
在购买马桶时应注意:
(1) 排污管是后排式的还是下排式的。下排式马桶的管距只能小于或等于而不能大于排污口中心点到墙壁边的距离。后排式马桶的管孔高度要与排污管管孔高度相符(指离地面距离)。
(2) 品牌和款式。至于品牌,还是上面的话,配件质量第一。至于款式,就各有喜好了,但一般来说,选购一体式的马桶要比分体式的马桶好,只是一体式的马桶费用较高。
4.卫生间镜子卫生间的镜子主要分为普通镜面和防雾镜面。 Anti-fog mirror is divided into coating anti-fog mirror and electric anti-fog mirror.前者通过涂层微孔阻止雾层的形成;后者通过电加热使镜面温度升高雾气快速蒸发,从而形成不了雾层。除此之外,市面上还有其他类型的防雾镜。
5.淋浴间目前市面上的淋浴间主要分为单面式和围合式两种。单面式的是指只有开启门的方向才有屏风,其他的三面是建筑墙体;围合式屏风一般是两面或两面以上,包括四面围合的。
淋浴间框体和材质有钢质和铝质,玻璃部分有钢化玻璃和普通玻璃。在价格方面,钢质和钢化玻璃钢的要贵些。
现在市面上还有一种整体式的淋浴间,有按摩、桑拿等功能。
选购时需要注意的事项:
(1) 检查门扇的开启是否顺畅。
(2) 门扇密封度如何?如果存在缝隙,则有可能往外渗水。
(3) 材质是否达到应有的强度。有一些不良商家使用塑料包装框体,有可能里面的材质不是原先说的那种。
6.卫生间灯具卫生是灯具的要求与厨房差不多,都要求具有防雾和易清洁的特点,所以带罩体的吸顶灯是最佳的选择。卫生间灯具宜明亮,不宜太暗。镜灯,宜用白炽光或自然光色的荧光管,否则,雪白的灯光下,人照镜子容易显得苍白。
7. Waterproofing of the bathroom and the kitchen is very important. It is recommended that the southern area should apply waterproof treatment to the bathroom and the kitchen at the same time.
(1) 先用塑料袋之类的东西把排污管口包起来,扎紧,以防堵塞。
(2) 使用成品的851或者911防水胶先刷墙面、地面,干透后再刷一遍。然后检查一下防水层是否存在微孔,如果有,及时补好。
(3) 第二遍刷完后,在其没有完全干透前,在表面再轻轻刷上一两层薄薄的纯水泥层(不要加沙)。
(4) 防水层的高度:建议卫生墙面做到顶,地面满刷。 The kitchen wall is 1m high, preferably to the top; the floor is full of brushes.
(5) 刷完,待其干透后用水泥沙浆做好一个泥门槛,然后在防水地区倒水进行测试,倒水高约1cm即可,时间为24小时,以楼下没有发现天花板渗水为准。
十、阳台及花园装修
(一) 阳台时候的技术含量其实不大,最关键的:第一是防水,第二是防水,第三还是防水。
1) 第一个防水——阳台推拉门的防水。在南方,阳台推拉门的施工技术,往常往是您家中能否安然度过台风季的关键所在。
Waterproofing of balcony sliding doors should pay attention to the quality of the doors and sealing is better. Do not mistake the inside and outside of the waterproof box. If your balcony doesn't have windows at all, or if your balcony window doesn't have good water resistance, then it's your second waterproof line.
2) 第二个防水——阳台地面的防水。 The first step to waterproof the balcony floor is to ensure that the floor has a slope.低的一边为排水口;第二就是要确保阳台和客厅至少有2~3cm的高度差。
It is very difficult to make such a difference in height between the living room and the balcony, because the height difference in the building may be only about 1cm. How to do? I suggest you use a marble board for decoration, which is practical and beautiful. Of course, the two sides of the slate must be well-sealed and leak-proof work.
3) 第三个防水——保持阳台地漏的通畅。 In heavy rain and typhoon, if the rainfall is greater than the drainage capacity of the floor drain, it may cause the balcony floor to form water. If the amount of water is too large, it may spread through the waterproof frame of the sliding door and enter the room. Although this situation is unlikely to occur, it does exist, so it has to be prevented, especially when the interior floor is a solid wood floor.
阳台的装修中,有一个情况是比较常见的,那就是拆除阳台与居室之间的那面墙(这种情况尤其以做封闭式阳台的为多)。 It should be noted that the wall between the balcony and the living room belongs to the weighted wall and acts as a constraining balcony. If you need to remove this wall, you should contact the community management office in advance and get permission from a professional engineer to implement it.
(二)花园的装修花园基本上可以分为阳台式花园和地面式花园,这里主要讨论阳台式花园。
阳台式花园的装修,形式可以多样,但有几点是需要注意的:
(1) 任何形式的装修,都需要考虑承重问题。 Unless your balcony has been strengthened in the building itself, artificial swimming pools cannot be built, and cinder bed treatment cannot be performed.
(2) 任何形式的装修,都需要考虑防水问题,不能破坏中的原有防层。
(3) 任何形式的装修,都需要考虑阳台受台的受风拉力问题,所有的附加物结构需要加强并确保牢固。
(4) 阳台地面要确保排水系统的顺畅,以免积水渗透进居室。
(5) 阳台的花草尽量选择抗虫性好的物种,而且种植带与居室需要做必要的分隔,以免居室遭虫蚁之患。不适宜在阳台式花园种植株高大的花种和小树。
(6) 阳台式花园有人工照明的,需要防水的灯具,并安装防漏电开关,发免雨天发生漏电,造成伤害。
(二) 阳台式花园附加建筑的特别说明如果您在阳台式花园中附加建筑体,那么需要注意如下的几点:
i. 要注意本地风力的级数,坚固度要达到当地的防风要求。
ii. 阳台附加建筑体上不宜有自由移动或者固定不牢的物体。
iii. 在台风地区,在阳台装置大间的附加建筑时,应把结构体与阳台柱体钢筋部直接焊实。
(三) 阳台封闭注意事项把一些半封闭的阳台封上铝合金或者塑钢窗,这是目前很多居民在装修中常见的一种行为,当然,这也得看小区管理处是否同意。
阳台封闭的注意事项:
(1) 铝合金材料。封闭阳台的铝合金材料的厚度应在1.2mm以上,铝合适合用于南方地区,推荐使用推拉窗式。
(2) 塑钢窗材料。封闭阳台的塑钢窗材料应核实型材内的确装置了钢衬。 Plastic-steel windows are suitable for use in the northern regions. We recommend using casement windows.
(3) 窗体玻璃应使用5mm以上清玻或色玻,有隔音要求的,可用中空玻璃。
(4) 阳台封闭部分边上的接合部,要做好防水、防渗处理,这包括封闭窗体的四边。 In addition, it should be noted that the outside of the closed form must have a slope outside to prevent seepage.
(四) 晾衣,是阳台设计的最主要用途。尤其是在潮湿的南方,衣服不挂地阳台上晒干的话,甚至有可能发霉。
i. 晾衣架的管体是否足够坚固?
ii. 晾衣架的钢绳是否够坚固?
iii. 安装时,应尽量把安装在小孩接触不到的高度。
iv. 晾衣时,要注意晾衣架的承重限制,以免过载造成意外。
十一、楼梯装修在复式房中,楼梯是很关键的部位,毕竟起着连上接下的作用。
1.楼梯的种类楼梯主要有下面几种:
1) 直梯。现在已经很少见了,因为占用的空间太多。
2) 弧梯。现在还有一些复式房用这种设计,但其只适合大型的复式房。
3) 折梯。此为多数复式房的设计。
4) 旋梯。此为折梯的变种。
2.楼梯的装修材料楼梯的装修,从形式上看有很多种,也很难一一说尽,但从材质上来说,却比较容易说出来。
楼梯可以用任何家装中的材料,例如实木、石板、瓷砖、钢板、地毯等做装饰。楼梯装修中,关键是扶手的设计,它是楼梯设计的重中之重。
The interior of the handrail design is the most taboo to use mirror stainless steel or other silver shiny metal.如果您的确想用不锈钢来做,建议用哑面的不锈钢。根据笔者的经验,做楼梯扶栏的最理想材料是煅钢,其次是铸铁,再次是木,再次是瓷。
The best handrail material is wood, followed by stone.
楼级,往往是在建筑中已经定型的,但也有很多业主拆除重装。而无论何种造型,如果您想重新设计,最理想的材料是用水泥混凝土,其次是钢结构,接下来才是木质。这主要从楼梯在人行走时尽量少发出声响来考虑。
3.楼梯装修时其他需要注意的问题(1) 楼梯的坡度不宜太大。 This not only considers the elderly and children, but also needs attention for ordinary adults.
(2) 楼梯是高磨损部位,应使用较为坚固的材料。
(3) 楼梯栏杆的宽度宜大或宜小,应考虑小孩夹头的可能性,要么是小孩头部进不去,要么是可以自由穿过。
(4) 有缝隙的楼梯踏级,要注意女士穿短裙子时的仪态问题,避免尴尬的情况出现。
(5) 楼梯的踏板,要注意做圆角处理,避免对脚部造成伤害。
(6) 避免碰头。我见过很多临时改造的楼梯,上楼梯总是要小心翼翼的。这对于复式房来说,就少了一份潇洒。

第五章装修之后一、装修保养装修之后,保养是非常重要的事情,下面谈相关的保养问题。
(一)木地板的保养对于实木地板的保养,大家往往把它的难度估计得太高了。其实,平常的清洁,使用吸尘机就行了。但记得吸尘器的轮子最好装上一个软质的套,以避免移动时,对地板造成伤害。另外,每个月可以用液体蜡,使用专用的拖把拖一遍就行了。这里需要说明的是,用液体蜡而不是固体蜡。如果人员使用频繁,可把打蜡周期改为半个月,最佳的打蜡时间是您上一次打的蜡尚未完全磨损之前。第一次铺设后,可以在使用前打一次液体蜡。
除非您的地板已经磨损得非常严重,否则不要使用固体蜡。一般固体蜡适宜五年以上的实木地板,但打一次就足够了,平常还是使用液体蜡。具体的操作方法,可参见相关的产品说明书。
木地板应避免磕碰,最好在门口备有若干双软底的拖鞋,以便家人和客人进入时换用。
木地板地使用过程中,应注意用水的安全,避免茶杯等水的倾倒。如果不小心将少量水倒在木地板上面,也不用太过于惊慌,应及时用干布或者纸巾吸湿。一般的实木地板都有六面封漆处理,少量的水不会造成太大的麻烦,但应及时整干,避免发霉、变黑。
(二) 铁艺制品的保养目前的铁艺制品主要是锻钢和铸铁制造的。铁艺制品容易生锈,尤其在南方潮湿的天气下。所以,保养的第一原则是注意防锈层的破坏。发现铁艺制品的漆层脱落时,应及时进行修补,防止金属体与空气长时间接触。一般来说,只要保持良好的漆面,铁艺制品是相当耐用的。
(三) 布料的保养在装修中,布料主要是指窗帘、布艺沙发面套和床上用品。这些布料的保养主要需要注意:
(1) 注意标签上的成分指示以选择合适的洗涤方式。
(2) 避免色泽差别的布料混合洗涤,黑色类与白色的混合洗涤更是大忌。
(四) 地毯的保养现在的家庭装修中,使用地毯的越来越多,有些是整幅的,有一些只是片块的。地毯的保养如何进行呢?
(1) 避免烟头。现在的地毯一般具有阻燃特征,但并不是每一款地毯都具有阻燃功能。而不管是阻烯还是不阻燃,一旦烟头掉在其中,至少会被烧出一个小焦坑。所以在铺设地毯时,家里应备有一小块剩料。当出现上述情况时,先用剪刀把烧焦的部分毯毛剪掉,再用剪刀把剩料的一小部分毯毛剪下来,用胶水粘在经过修整的烧焦的坑部。待其干透后梳理一下即可。
(2) 整体的地毯可以在一段时间后,请专业的清洁公司使用机器进行清洁。其间隔时间可以污脏的程度决定。
(3) 地毯沾上污渍怎么办?若是陈迹,宜用牛奶浸润片刻,再毛刷蘸牛奶刷拭即可;动植物油迹,可用棉花蘸纯度较高的汽油擦拭;果汁和啤汁,要先用软布蘸洗衣粉溶液擦拭,再用温水加少许食醋溶液擦洗;如遇难解决的墨水迹,可在污处撒上细盐末,然后用温水搀肥皂液刷除。
(五) 橱柜的保养(1) 门板的保养。保持门板的干爽;清洁时,尽量使用较为细腻的清洁布。
(2) 实木柜体和门板可使用液体蜡保持光洁。
(3) 水晶门板和烤漆门板应避免硬物摩擦造成刮痕。
(4) 门板的烟斗铰宜定期用螺丝刀把松动的螺丝固定,也可以定期加点润滑油以保证开关灵活。
(5) 保持台面的干净,如不以慎导致人造石面的划痕,体质的人造石台面用细砂纸轻轻打磨即可去掉。
(六)玻璃的保养(1) 要保持玻璃的清洁,一是依靠专用的玻璃清洁剂,这在很多超市都可以买到;另一种省钱的做法就是使用食醋。
(2) 在容易撞碰的部位加上较为明显的标志,当然,家居中很少会使用诸如“小心玻璃”之类的警告牌,但是可以采用圣诞花环或者小卡片等来装饰,既能起装饰效果,又能起警示作用。
(七)真皮沙发的保养真皮沙发保养时,应注意保持真皮的光洁和饱满度。
(1) 在长时间坐用之后,宜适量拍打沙发面,以减少陷现象的出现。
(2) 避免阳光长时间照射,以免皮面老化和失去光泽。
(3) 清洁皮面宜细致,可用专门的皮具清洁剂或者肥皂水。清洁完毕后,要及时清理。切勿使用酸碱性的清洁剂,以免对皮层造成伤害。
三、装修纠纷的处理装修是一件令业主头痛、费神的事,装修过程中往往会发生一些这样那样的问题,甚至还会与装修公司产生纠纷。那么,如何正确处理出现的问题呢?
(一)识别问题的性质弄清事情的发生,是属于主观因素、客观因素还是第三者因素。
1.主观因素主观因素包括偷工减料行为、使用伪产品等。
2.客观因素客观因素包括防备不足导致的意外、不可抗力的天灾、房屋本身缺陷造成的意外、新技术的尝试应用等。
3.第三者因素第三者因素包括第三方供货商导致的伪劣产品、第三者造成的工程损害等。
(二)问题解决的办法
1.顺利解决在责任清楚、对方无主观故意、双方能对问题的解决方案达成共识时,应尽量忘去旧事、继续合作,使问题顺利解决,切莫因过去发生的不愉快事影响双方日后的合作。
2.妥协解决在双方对责任争议不下的情况下,可协商各自让步,尽量把问题简化到大[家都能接受的地步。这种情况在工程中是经常发生的,尤其是在责任认定不清楚的情况下。例如,经常发生的事情就是,铺出来的砖不平,业主方抱怨施工方施工不合格,而施工方则埋怨业主方买的砖质量太差。
3.仲载解决在双方认为自己没有错、僵持不下、问题无法解决的情况下,最佳的方法就是通过质检部门进行技术鉴定。但技术部门往往只能起鉴定的作用,并不能有效解决争端,还要找仲裁机构。
4.法律解决双方最终都不欢而散的情况下,那只有通过法院来解决问题。这是一种最无奈的解决8方法,因为双方都得花费时间、浪费金钱。所以,这一招是不得已而为之的办法。
(三) 装修纠纷的预防预防装修纠纷,首先涉及“丑话说在前面”的问题。在双方合作开始前,就应相关的问题在合同中作出明确的规定,避免日后起争议。
1.材料质量的规定现在的装修材料,有些是业主买的,有些是装修公司包的。那么,双方都应对材料导致的结果作出责任规定。这一点是非常令人头痛的,因为材料的质量往往对施工的质量起决定性作用。例如油漆,假的往往会导致施工的失败。很多业主都有对主材很关心,但对辅不太关心,这是错误的。辅料在一些工程项目中起着很关键的作用。
笔者认为,这种半包的方式迟早会被全包所代替,要么业主负责所有的主材和辅料,或者装修公司全包因为这样最容易避免出现问题。
但业主方买材料有一个难题,那就是专业知识不够,难免买了假货或者劣质货。而且涉及纹理配色什么的,操作也是有难度的。
2.施工工艺的规定双方要避免日后的争议,就得对施工工艺作出大概的规定。当然,现在的装饰材料日月异工艺也随之改变,所以很难对工艺作出限制。但业主可以对一定的步骤作出规定。例如油漆得刷多少遍等。需要提醒的是,类似的指标不是越高越好,例如油漆刷太遍不一定好。
3.施工结果的规定现在有很多城市都对装修立法,包括验收标准。这其中有一些是强制性标准,有一些是推荐性标准。对于推荐性标准,如果没有列入合同,则是不起效力的。强制性标准可列入的施工验收标准有问题,有的是过时的。
4.施工保修的规定这一点是最要害的,不管前面的说得多详细,如果没有对保修作出规定,都是空话。现在国家的强制性保修是两年,其中防水等项目是五年。在保修期内,质量问题由装修公司负责。当然,如果不是全包的,对于质量就会有争议。例如防水工程,会涉及材料质量低劣而导致老化的问题。
5.施工工期的规定双方应对工期作出明确的规定,包括违反工期的惩罚。这一条是解决工程拖延的最佳方式。
6.款方式的规定双方应对付款作出明确的规定,包括对拖延付款的惩罚。很多业主都会用扣款的方式来对付装修公司。其实做生意谁不赚钱?该让人家赚的,一分不能少,也不能拖。
(二) 极端情况的避免在装修纠纷中,有时会出现极端的处理方式,包括威胁、暴力。双方在协相关装修问题时,应保持心平气和的态度,以理相争,以事论事,不宜过分刺激对方。一旦出现过激情况,应求助于公安机关。
a) 常见问题解答
1. “中国黑”是不是大理石,能不能做灶台面?
答:中国黑不是大理石,它属于花岗石,可以当灶面。
2.我的卫生间水管要埋暗管,施工单位说用日丰铝塑管好,绿色无毒,寿命比镀锌管长,而且因为不生锈,所以不会有水质的二次污染,现在有全面取代镀锌管理体制趋势;监理则说铝塑管管壁强度不如镀锌管,所发必须每隔1.2mm就设置一个接头,用普通的镀锌管就行。我应该采纳谁的方案呢?另外,施工单位包工包料的价钱是镀锌管埋暗管40元/m,日丰铝塑管埋暗管80元/m,相差一倍的价钱,说是因为铝塑管贵得多。可是监理说实际上铝塑管与镀锌管的价格差不多。谁说得对呢?
答:(1)铝塑管的管壁强度已经满足需要,不需要理会谁强谁弱的问题。
(2)管往往因为含有沙眼,有爆水管隐患,所以建筑商装镀锌铁管一般不敢埋暗管。如果您采用暗管的做法又采用不着镀锌铁管的话,简直是一种冒险行为。
(3)每隔1.2m装一个接头的做法是一种愚蠢行为。接头越多,隐患越大!所以除非是管长不够需要接驳或者转弯,否则坚决不用多加接头。
(4)铝塑管的价格与镀锌铁管的差价是很大,管道部分差一倍价格是可能的,单一个接头就差5倍。不过铝塑管的报价是可以适当再下降点的。
3.我不打算封阳台,客厅和阳台间是房地产商装好的塑钢拉门,厅里要铺实木地板,请问要不要做防水?怎么做比较好?
答:需要做防水,而且要确保客厅比阳台高于30mm以上,分隔处可以用花岗石做防水。
4.请问一般地台做多高呢?
答:离地50~150mm为宜,地台的高度差要以两个地面的差额来算。
5.请问复合木地板被砸了个小坑如何复?
答:无药可救,复合木地板不可修复。
6.请问什么叫苯版?轻钢石膏结构和苯板结构的保温墙各有何特点? Soap Rack Or Holder

soap rack,soap holder,soap stand,stainless steel soap holder,steel wire soap stand,etc.Let your bathroom become more simple and upscale!Applicable to families, hotels, home stay and other places to use.

304 stainless steel never rust, will easy to clear, it's also very durable!

we are 15 year factory, we had big engineer team, and strong production line, can give you good serve and quanlity. Welcome to cooperation!

soap rack,soap stand,soap holder,soap dish,soap dish rack

Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com