Decoration paint is one of the indispensable materials in modern home decoration and it can improve indoor decoration pollution. There are many types of decoration coatings on the market, which make people dazzled. So many owners do not know how to start when they choose. Today Xiao Bian will introduce the coating of tempering in paint. So what is called tempered coating ? What are the advantages of tempered coatings? Let's take a look! What is tempered paint : What is tempered paint? In fact, the tempered coating is mainly made of silica sol and acrylic emulsion. Has a high degree of finish, delicate touch, anti-insect anti-corrosion, sound insulation and other properties. Long-term use will not bring harm to people's health, and it is very safe and environmentally friendly. So it is loved by a wide range of consumers. What are the advantages of tempered coatings? 1ã€High hardness of tempering coating The hardness of the tempered paint is higher, and the hardness and gloss after the construction are higher than those of the melamine. 2, good finish The surface finish of the tempered coating is good, not only has the anti-insect, anti-corrosion performance, but also has a certain anti-ultraviolet function. Better than traditional decoration paint. 3, cheap The tempered paint film has high hardness, stain resistance and easy cleaning. When it comes to dirt on the wall, wipe it with a wet towel and clean it, and the water won't soak into the wall. It is a very cost-effective product, especially suitable for decoration in warehouses and other places. 4, long service life The tempered paint is very scrub resistant. After relevant tests, the number of dry scrubs is as high as 10,000 times. The service life can reach 15-20 years. The use of toughened paint precautions : 1, the tempering coating in the construction of the temperature requirements between 0-35 °C, the base surface temperature above 5 °C the best. 2. The purchased tempered paint needs to be stored in a dry, cool and cool area. Pay attention to waterproof and direct sunlight, otherwise it will affect the quality of the product. 3. When the steel coating is applied, the gloss of the wall surface should be uniform and flat, and there should be no sag or paint leakage. 4, in the deployment of tempered paint, it is recommended to use the number of how much to adjust, do not multi-tune, to avoid the suspension due to a long time and cause curing. Form waste. 5, but also pay attention to view the instruction manual, with special auxiliary materials deployment, do not use water, gasoline and other substances mixed use. 6. In the past, we mentioned that the construction temperature of tempered paint is around 0-35°C and the humidity is below 85%. Therefore, it cannot be constructed under rain, snow, fog, and other humidity. In order to avoid affecting the quality of construction. Conclusion: The above is for everyone to introduce what are the advantages of steel coating and tempering coating, and hope to help those in need. If you need to learn more about the later stage, please pay attention to the information on this site. What is carbon steel made of? Carbon Steel Stainless,Carbon Seamless Steel,Metal Stamping Carbon Steel Products,Carbon Steel Square Pipe Zhonglian Yongsheng Special Steel Co.,Ltd , https://www.zlysssteel.com
So-called carbon steel actually means the mechanics performance depends on is the carbon content in steel, general not add master alloy elements of the steel is also known as general carbon steel or carbon steel, and also called carbon steel, carbon steel means the carbon content WC is less than two percent of the iron carbon alloy, carbon and carbon steel in addition to outside, also contains a small amount of materials such as silicon, manganese, sulfur and phosphorus.
Generally carbon steel with higher carbon content will be harder and stronger, but the plasticity will be lower.
What are the advantages and disadvantages of carbon steel?
advantages
1. Higher hardness and better wear resistance of carbon steel can be obtained after heat treatment.
2. The hardness of carbon steel in annealed state is very moderate, and it has good machinability.
3, carbon steel raw materials are very common, simple and easy to obtain, and the cost of production is relatively low.
disadvantages
1, the thermal hardness of carbon steel will be poor, because when the working temperature of the tool is more than two hundred degrees, its hardness and wear resistance will drop sharply.
2, the hardenability of carbon steel is very low, water quenching completely quenched the diameter of the general in 15-18 mm, and for the diameter or thickness is only about 6 mm, so it will be relatively easy to deformation and cracking.
What are the classifications of carbon steel
1, according to the use of carbon steel can be divided into carbon structural steel, carbon tool steel and easy to cut structural steel these three categories.
2. According to the smelting method, carbon steel can be divided into open hearth steel, converter steel and electric furnace steel.
3. According to the method of deoxidation, carbon steel can be classified into efferrescent steel, killed steel, semi-killed steel and special killed steel, which are denoted by code F, Z, B and TZ respectively.
According to the carbon content, carbon steel can be divided into low carbon steel, medium carbon steel and high carbon steel.
5. According to the content of sulfur and phosphorus, carbon steel can be divided into ordinary carbon steel with higher content, high-quality carbon steel with lower content of phosphorus and sulfur, and high-grade high-quality steel with lower content of phosphorus and sulfur, and finally there is a super grade of high-quality steel these four categories.