The presence of machinery and equipment in the production of today's processing industry is necessary for its development, and it is also the best helper for its completion of production and efficient economic efficiency. It is because of this that machinery and equipment can be developed, and the sealing machine equipment is also Under such trends, there has been greater progress and development. Now its presence is active in every corner of the market, and it is a force for the prosperity of human life. The continuous attention in the sealing machine industry has also enriched its development. As a result, many new types of equipment have been created and appeared in the market. The vacuum sealing machine is an iconic existence. Then the processing method of the vacuum sealing machine operation failure ?
After understanding the value of the vacuum sealer in the market, it is necessary to have greater protection for the operation of the equipment to ensure the high efficiency of product production. Therefore, it is necessary to carry out various faults during the operation of the vacuum sealer. A comprehensive understanding and mastery can ensure that the equipment can be produced at high speed and in safety and bring a safer protection to the product.
Vacuum sealer common operation failures and treatment methods:
1, vacuum display is not normal: check the vacuum generator is normal, check the vacuum valve is damaged, check the vacuum table is damaged;
2. No heat or temperature rise: Check whether the heat pipe is in good condition, check whether the wiring is in good condition, check whether the solid state relay is in good condition, check whether the thermocouple is in good condition, and the cylinder does not move;
3, no action: be stuck, check the adjustment mechanism; cylinder damage, replace the cylinder.
4, temperature out of control: check the heating solid state relay, check the heat pipe, check the thermocouple, check the temperature controller's internal parameters are set;
5, the cylinder does not move: check whether the air pressure meets the requirements, whether the temperature alarm phenomenon of high and low temperature, check the solenoid valve is intact, check the cylinder valve is in place, check the circuit wiring;
6, head does not move: the head is stuck, check the head adjustment mechanism; head cylinder damage, replace the cylinder.
These are the Shanghai-cast scale automatic packaging machines description of the operational failure of the processing method of vacuum packaging machine, hope to help you. Hot Recommendation: Food Granule Packaging Machine [Recommended] Automatic Fitting Packaging Machine [Recommended] Food Pillow Packaging Machine [Recommended] Weighing Quantitative Packaging Machine [Recommended] Fully Automatic Double Room Vacuum Packaging Machine [Recommended] Food Loading Machine [Recommended] Liquid small filling machine [Recommended]
the Einstabmatten have high stability and longevity.this quality
results from the high-quality ral materials and the careful processing with the
most modern production techniques.
the surface treatment is galvanized or powder coated.all the panel
fence are welded by ourselves' welding machine,and powder coated by ourselves'
powder coating line.
normally the thickness is 8+6+4mm,we can also produce as the
customer's request.
they used for school play ground,commerical areas,also perfect for
sports grounds,parks,etc.
