Two-speed motor hot oil cleaning method Soft dry oil or anti-rust cream hardened bearings should be immersed in hot oil of 100-200 °C, clamp the bearing with pliers, and brush the oil on the bearing with a brush. The soft dry oil or rust-proof paste is melted when heated to 100-200 ° C, and is easily washed out from the gap of the bearing. Sometimes it is only necessary to shake the bearing several times in the oil, and the oil will flow away from the gap.
Framed Mirror, Black Round Mirror, Black Framed Mirror, Frames For Mirrors, Foamed Mirror On The Wall, Stainless Steel Frame with Mirror Finished
Detail: 5mm copper free mirror with polished edge / Matt black s/s 304 frame, Explosion Proof membrane, 2 bracket
Standard Size is 600mm, 750mm, 900mm, Size
After-sale Service: Online
When cleaning the centripetal spherical bearing of the old motor or the imported motor, the ball, the bead frame and the inner ring should be laterally turned out from the outer ring and then immersed in the hot oil. The short cylindrical roller bearing should also be rolled when cleaning. The bead frame, the inner ring and the outer ring are disengaged.
When hot oil is cleaned, the temperature of the oil should not exceed 20 °C.
Http://
Framed Mirror, Black Round Mirror, Black Framed Mirror, Frames For Mirrors, Foamed Mirror On The Wall, Stainless Steel Frame with Mirror Finished, Bathroom Mirror with frame
Duraplex Limited , https://www.duraplex.com.cn