Bathroom decoration safety small details are most easily overlooked The electrical switch should be installed outside the bathroom as much as possible, and the wiring of the bathroom space must be sealed, waterproof and insulated. If there is a socket in the bathroom, please keep it away from the water source. It is best to cover it, and keep in mind that the wet hand should not be pulled out. The installation and use of the water heater must pay special attention to safety. Not only the safety performance of the water heater itself will affect the safety of the bathroom, but also the ventilation capacity of the bathroom space. If the ventilation capacity of the window is limited, an exhaust fan with a reverse gate can be installed, and the gap between the door of the bathroom and the floor can be made larger. Floor tiles should be laid to maintain a 1% drainage slope with the slope facing the water surface. The waterproofing, construction process and material selection of the bathroom space are equally important. The joints of the floor tiles should be the same thickness, aligned with the wall bricks, and flattened when the tiles are attached. The water in the bathroom space can be drained as soon as possible. Before the construction of the wall bricks, the wall waterproofing treatment project is first carried out to ensure that the wall waterproofing is foolproof. The bathroom decoration actually has its emphasis. It has high quality requirements for floor tiles and wall tiles, and the requirements for waterproofing are also high. This also reminds us to pay attention to the renovation, and strive to decorate the bathroom that is safe and practical. CHANGZHOU ANTALYA TOOL AND MACHINERY CO., LTD. , https://www.atly-tool.com