What is the role of the ribs designed on PPR fittings? Sensor Light Bulb,Sensor Led Night Light,Motion Sensor Led Light,Human Motion Sensor Led Light JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.jmsensorsled.com What is the role of the ribs designed on PPR fittings?
The ribs designed on the pipe are mainly used in the following aspects, and cannot be hacked.
1. Reinforce the compressive strength of the pipe fittings. The PPR pipe fittings work under different environments and will withstand different pressures, especially the water simmering phenomenon during the transfer of water, which is very destructive to the pipe fittings, so the pressure on the pipe fittings The ability is high. Usually the problem of the pipe is at the interface of the PPR pipe and the pipe fitting, so the design of the rib at the interface of the PPR pipe can better improve the compressive performance and strength of the pipe.
2. Avoid external force damage. The ribs are designed at the two ends of the PPR pipe. The arcs of the two ends and the pipe are kept uniform, and the ribs are evenly connected with the ribs in the middle to avoid the stress concentration caused by the external force. And destroy the PPR pipe fittings.
Third, it plays a fixed role. When the PPR pipe is working, the thermal expansion and contraction caused by the change of water temperature and ambient temperature can easily damage the pipe fittings and cause damage to the wall (such as the elongation of the pipe due to thermal expansion). Ejecting wall tiles or damaging walls).
Fourth, it plays an aesthetic role, in addition to strengthening the reinforcement, it can also increase the beauty of the sense. The ribs outside the pipe can also be used as the marking line, which can be aligned with the marking line of the pipe during installation to avoid the distortion caused by the non-standard alignment of the pipe ends.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn