S.S Shower Hose,Hand Shower Hose,Stainless Steel Shower Hose,Handheld Shower Head Hose kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com
Instructions
Open the end cover of the lamp with the wiring hole, introduce the 8~14mm three-core cable into the lamp, tighten the compression nut to ensure the cable is sealed, and then connect the three cable ends of the cable to the right connection. The lighting can be achieved by connecting the power supply or an extension cord, and then turning on the power. Turn off the power switch. Determine the installation method and position of the lamp according to the lighting requirements of the site. Use M4~M5 screws and gaskets to fix the lamp.
Note 1, the lamp is installed in the equipped carton during transportation, and foam shock absorption is added.
2. When installing the lamp, the lamp should be safely grounded.
3, when used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the temperature of the center of the transparent part is relatively high and must not be touched.
4. When maintaining the lamp, you must disconnect the power first.
Safety warning 1. The power must be turned off before replacing the light source and disassembling the lamp.
2. It is strictly forbidden to turn on the lamp with electricity.
3. Wear clean white gloves when checking the line or changing the light source.
4, non-professionals are not free to install, remove lamps and ballasts.
Talking about the use and precautions of explosion-proof emergency lights
Explosion-proof emergency lights are suitable for a variety of indoor and outdoor workplaces. China's coal industry, PetroChina, Sinopec, CNOOC, power, metallurgy, railways, iron and steel, shipbuilding, aerospace, aerospace, fire protection, chemical, government, stadiums, transportation, and large-scale enterprises use fixed lighting.