Automatic Sliding Door System Ec,Automatic Sliding Door,Ec Door Operator,Ec Operator Caesar door control co.,ltd , https://www.caesar-door.com
2 After the promotion valve has been operated for a long time, the seals are worn out, causing the compressed air to leak, resulting in insufficient air supply.
Single-pulse dust collector solution:
1 Add a set of oil-water separators. When it is found that the filter element is dirty, another set can be replaced to clean the dirty one.
2 In addition to promptly replacing the seal of the promotion valve, the following measures shall be taken: The pressure of the supply valve for the promotion valve shall be adjusted between 0.25 and 0.5 MPa to ensure that each promotion valve can act within a defined time, and the pressure should not be too high. , otherwise it is easy to negative cylinder seal aging, when the air leakage point increases, you can increase the pressure of the gas supply; ensure the oil-water separator for fuel, oil supply speed can not be too small, so as not to lose oil. In addition, a certain amount of grease is added to the stem of the promotion cylinder.
How to realize the offline replacement of the bag by the single dust collector is the most troublesome problem for the user. Let us understand with you how to implement this function. The installation of dust collector frame and cloth bag is the minimum work and careful work in all installations, so it should be placed at the end of the installation. When installing, the dust bag must not collide with the hard objects, and the hooks will be scratched, even small scratches Make the life of the bag greatly shortened. The method for installing the cloth bag is to put the cloth bag into the bag room from the hole of the flower plate of the box first, then press the spring coil on the upper part of the bag mouth into concave shape, put it into the flower hole plate of the box body, and then restore the spring coil to make it Press tightly on the circumference of the flower hole, and then gently insert the bag cage from the mouth of the bag until the cover on the upper part of the bag cage actually presses on the flower plate hole in the box. In order to prevent the dust bag from being stepped on, it is required to install a dust filter frame for each bag.
Single-pulse precipitator tripping and offline replacement bag
1 The oil-water separator between the gas storage tank and the promotion valve causes blockage of the filter element due to dirty compressed air;