KMP Komatsu Parts,KMP Komatsu Spare Parts,KMP Komatsu Undercarriage Parts,Quality KMP Komatsu Parts JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.huaxinbrush.com
All waterproof clothing and protective products made of rubber-coated fabrics shall comply with the following requirements:
1. The fabric and appearance quality of the waterproof suit and its physical and chemical properties 2. The waterproof suit structure is reasonably set according to the requirements of different workplaces. The structural style should ensure that the limbs move freely during the operation, and it is not easy to cause hooks, pulls, and twists. , grinding, easy to wear and take off.
The rubber shoes matched with the waterproof suit are made of half-waisted rain boots, and the gloves are waterproof protective gloves.
3, the appearance of waterproof clothing 1 The surface of such labor insurance products should be smooth and clean.
2 no damage, dead folds, bubbles, knife marks, delamination, jet, sticky, lack of glue and other defects.
3The sewing thread is straight, the stitch code is uniform, neat and elastic, and the heavy needle is 1.5cm or more after the thread is broken, and the stitch is 1cm.
4 The symmetry difference is not more than 0.5cm, and the length difference of the boot pants is not more than 0.6cm.
5 The trademark position is correct, the writing is clear, and there is no burr.
6 The joint width of the joint is not less than 1cm, and the adhesive width of the strip is not less than 2cm.
7 The color difference of the matching piece is not less than 3 levels.
This article is from: http://