Glass has a light and light texture, color art style is changeable, but also has the function of spacing and enlarge space, thus becoming a must-have building material for fashion and personality. With a wide variety of glass types and a wide range of applications for homes, how do you correctly use glass to decorate homes in different corners? In this issue, Xiao Bian gave everyone a good idea how to apply glass building materials in home furnishings. First, the glass ceiling to create a beautiful "starry sky" Glass ceiling is undoubtedly the most eye-catching of home-improvement glass applications, especially when the height of the living room is not very high. Creating a glass ceiling can reduce the space pressure, and at the same time, the reflected light energy of the glass is better than that of the glass. Its own color can create a beautiful “starry sky†in the interior, creating a beautiful romantic or warm atmosphere. 1, glass ceiling selection taking into account the decoration and safety Decorative glass such as stained glass, glass mosaic, and sandblasted glass are excellent materials for glass ceilings. However, because of location problems, for safety reasons, glass used in the ceiling and other vulnerable parts should be used in combination with safety. Glass, that is, laminated glass, tempered glass, etc., the glass thickness is generally controlled at 0.5-0.8 cm. Transparent art uses glass to decorate personal home 2, aisle glass ceiling can not be used alone Glass ceilings are mostly used for aisle ceilings, but they cannot be used on a large area of ​​the ceiling alone. Glass, wood, or plaster must be used to separate glass ceilings into squares. When using a glass suspended ceiling in the living room, the width of the glass must be as small as possible because the bending resistance of the glass is relatively poor. 3, before installing the floor to strengthen the solid ceiling The installation of glass ceilings is recommended to use the keel on the top surface and the upper layer on the keel. Generally speaking, the universal 9-inch joinery board is the same as the plywood. 4, do a good job of anti-corrosion fire prevention and regular inspection All exposed solder joints on glass ceilings must be painted with anti-rust paint before installation of glass panels. The interface between the wood frame and the structure should be treated with antiseptic treatment. The keel needs no adhesive, and the fire retardant coating must be brushed at 2 to 3 degrees. In addition, the load-bearing steel structure should be inspected regularly in the glass ceiling. When the glass is loosened, it is necessary to find the cause in time. And repair or replace. Second, the glass cut off to reduce the room space isolation In the common glass partition, the ordinary glass partition is simple and bright, the stained glass partition is refined, the sandblasted or carved glass partition is elegant, the cracked glass partition is ethereal and mysterious. It brings different visuals to the home. Although the cost is high, the glass The partition is bright and artistic, reducing the sense of isolation in both spaces and visually expanding the space. Glass partition space can be expressed in many forms. The living room, entrance glass tiles, etc. to create a glass screen to do embellishment, kitchen and bathroom use opaque semi-enclosed glass sliding door partition, the bathroom uses a fully enclosed glass partition, are a good choice. 1, the color glass attention tone and the overall style of the room Glass partitions are mostly glass with decorative effects, creating fantastic artistic effects through fantastic color changes. Therefore, if a decorative glass partition is used, the most important thing is that the color tone is the same as the overall decorative style of the room. 2, the selection of glass thickness of 1 cm for the partition wall is better The thickness of the glass is mainly 0.3 cm, 0.5 cm, 0.8 cm, 1 cm, etc. For a glass partition wall, the final thickness is 1 cm, and the load-bearing capacity is better. The thickness of 0.5-0.8 cm is more suitable for pure decoration parts or cabinet panels. 3, single glass area should not be too large If the entire glass partition is not used, then when the area of ​​the single glass is too large (for example, more than 1 square meter), there is a relatively large safety risk in terms of architecture. Therefore, it should be done without affecting the overall effect. The glass may be split into small pieces, or the proportion of frames may be increased appropriately to reduce the chance of the glass being hit. 4, glass material according to the bathroom area for adjustment The use of glass partitions in the bathroom is more common, in the smaller bathroom, the impact of human activities on the glass can not be great, can be cut off with tempered glass; and for larger spaces bathroom glass partition and partition wall You need to choose the largest laminating glass. Glass Process Glass Glass Partition Glass Door Glass Furniture
There are some auxiliary products used for concrete or mortar application. It is recommended here about concrete sealer or densifier and mould releasing agent for concrete. Concrete sealer is lithium silicate based, and offered with ready product and raw materials. Mould releasing agent, also named as demoulding agent has long-term application experience with all kinds of concrete mold, like wood, steel, plastic etc.
Mold Release Agents,Concrete Mold Release,Concrete Auxiliary Product,Concrete Hardener And Sealer Shanghai Na Long Tech Co., Ltd , https://www.na-long.com
Light and light texture Enjoy the clever use of glass to decorate your home
1 2 Next> Total 2 Page
Page to page