Paints and latex paints are indispensable materials in the decoration process. They can not only protect the furniture and the wall surface, but also give the home a rich connotation and add a touch of bright color to the home. Therefore, the maintenance and care of paints and latex paints have become the common concerns of consumers. The drying time for a typical paint brush is 3 to 4 hours, and the complete drying time is 48 hours or more. Therefore, consumers should not use clean water to scrub directly after moving into their new home, so as not to infiltrate the paint layer with excessive moisture and form a “white†phenomenon. If it is necessary to wax the paint, it must be carried out one month after the new house is occupied, so that the moisture in the substrate can be fully evaporated. The "white marks" caused by impact on the varnish surface can be wetted with slow-drying water first, then the surface layer is scratched and wiped cleanly with a blade tip, and then the mixture is slowly mixed with a brush, a hardener, and a mixture of paints. Start with a few light grinds with 2,500 mesh sandpaper after drying. In addition, the use of balsam can remove the glue marks formed on the surface of the paint film due to sticking. If you have problems that cannot be solved, you can also consult the paint professional. Decontamination of latex paint: Due to the distribution of many uniform particles on the surface of emulsion paint, pollutants are easily adsorbed on the surface. In order to better remove the stains, experts recommend directly using the cloth to clean Jie Ling, gently wipe along the pollution, avoid diluting with water The spirit and the hard rotating scrubbing so that the "alkali" and dirt penetrate into the surface of the paint film after drying to form a "water yellow blot", wipe the polluted place and then wipe it again with a damp towel. Due to the slow drying of the surface of the construction paint film in winter, it is best to dry the windows after the completion of construction and open the windows for ventilation to prevent local cracking of the walls. In addition, when the wall is cracked due to impact and needs to be repaired, it is best to use putty paste and latex paint to fill it. This can ensure that there is no color difference in the bottom layer of the wall after drying, and then use a latex paint brush or light coating one or two times. . If your home is using spray construction, it is best to ask professionals to repair it in order to ensure construction quality. Links: Home corner clean tips Home care three trees paint paint latex paint home window furniture decoration home 