The floor of the house has been used for a long time, properly refurbished under the wax. Not only more beautiful, but also more effective protection of the life of the floor. Following Xiao Bian look at the ground waxing renovation have what knowledge essentials.

Ground waxing renovation knowledge

First, choose sunny weather

Humidity in rainy days is too high and waxing can cause cloudiness. At room temperature below 5 degrees, the floor wax will harden.

Before waxing, do not wipe the floor with a chemical rag. This can cause poor adhesion of the floor wax.

Second, clear the floor surface of the garbage, dirt

Use a vacuum cleaner to remove trash and dust from the floor surface. Wipe the stain on the floor with a diluted neutral detergent. For difficult-to-remove stains, please clean with water.

To prevent the detergent from accumulating in the grooves, the rag soaked with detergent should be wrung out as much as possible.

Third, wipe with a wrung rag

Wipe with a well-wrung rag. The surface of the floor, especially the grooved part, should be carefully wiped and there should be no residual detergent. If there is residual detergent and moisture, the surface will be whitened and bulging.

Fourth, fully dry

Floor surfaces and grooves are completely dry before waxing. According to the season, the time required will change, but it will take more than half a day.

Fifth, floor waxing method

Shake the container with the floor wax and stir well. Before the entire floor of the room is waxed, perform a partial trial at the corners of the room and check for any abnormalities.

It is advisable to fully dip floor wax with a clean cloth so as not to drip. Do not pour the floor wax directly on the floor, otherwise there will be traces of marks and circles.

Apply it carefully in the direction of the wood grain of the floor, without missing paint or uneven thickness. Excessive smearing will cause uneven shades and excessive smearing that will result in poor film formation.

6, before the floor wax is dry, do not walk on the floor

Drying usually takes 20 minutes to 1 hour. If there is a leak, apply it.

Ground waxing considerations

1. According to the type of floor to choose the corresponding floor wax: floor wax can be roughly divided into two types of water and oil.

2. Floor wax removal method: ordinary floor wax scavenger, and some are strongly alkaline. Because the wood floor material is wood, alkaline components will cause the floor discoloration, trace stains, absolutely not use, you can use a rag soaked in solvent (Urea formaldehyde, water) wipe method.

3. Precautions when laying floors: The bond strength of urea-formaldehyde adhesives is very high and special attention must be paid. In case of sticking to the surface, place a rag soaked with urea formaldehyde water, and cover the rag with a plastic film, soften the adhesive, and remove it with a bamboo blade or a plastic blade.

4. Required tools and materials: Resin floor wax, masking tape, special mop for waxing, solvent (urea-formaldehyde water), bucket, solvent-resistant gloves, rags, plastic blade, bamboo blade, vacuum cleaner.

Editor's summary: The whole solution to ground waxing renovation is introduced here. For more information, you can follow this site information.

Waxing on the floor

Sch****** Escalator Spare Parts

Sch****** Escalator Spare Parts, Sch****** Escalator Parts

Sch****** 9300 AE

Sch****** 9700

Sch****** 9300® AE - The versatile escalator

Sch****** Escalator Spare Parts, Sch****** Escalator Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com