Heating in the winter is about to begin, and after the warmth begins, the temperature in the room will rise. This is the time when the floor has the most problems, so it is important to observe the changes of the floor carefully during this time. Of course, the maintenance of wooden floors should also be treated differently depending on the type of flooring. Laminate flooring Laminate flooring maintenance is much simpler than solid wood flooring. The laminate flooring does not need to be waxed, nor can it be sanded and polished. Always clean the floor to keep the floor dry, use a wringed wet mop to wipe. Take care to avoid using a drip mop to drag on the floor. Use a neutral detergent when cleaning stains to avoid direct sunlight for a long time. Rain and moisture should also be avoided. Although the hardened floor surface is hard, it should also avoid sharp objects scratching the floor. In addition, paying attention to indoor ventilation and maintaining indoor temperature are also beneficial to extend the service life of the floor. wooden floor In order to maintain the beauty of the solid wood floor and extend the service life of the floor, the average family waxes the solid wood floor once a month, at least twice a year. Wipe the floor with a damp cloth before waxing. After drying, apply a layer of floor wax evenly on the surface. After a little drying, wipe it with a soft cloth until it is smooth and bright. During daily use, care should be taken to avoid scratching the floor with heavy metal sharps, glass tiles, studs, etc.; do not expose the floor to open flames or place high-power electric heaters directly on the floor; do not place strong acid and alkali on the floor. Sexual substance. If it is wetted by water or scrubbed with alkaline water cleaner or soapy water, it will destroy the brightness of the paint. Prolonged exposure to sunlight, or rapid rise and fall of temperature in the room may cause premature cracking and aging of the solid wood floor paint surface, and should be avoided as much as possible. The temperature of the air conditioner is too high, which makes the temperature change too much during the day and night, and it will cause the floor to expand or contract too much, causing deformation and cracking of the floor. During the use of the floor, if individual floors are found to be shelled, detached or deformed, the floor manufacturer should be promptly notified to repair, so as to avoid smashing other floors and causing large-scale maintenance. Parquet The maintenance of parquet is simpler than solid wood flooring. Keep the floor dry and clean, mop the floor without dripping mop, and effectively protect the floor without using alkaline cleaner or soapy water to wipe the floor. When moving furniture or other heavy objects, it should not be pushed and pulled directly on the floor. It should be lifted and lifted. The frequently moved furniture can be glued on the bottom or wrapped in cotton. Poleline construction hardware refers to the various components and equipment used in the construction and maintenance of power transmission and distribution lines. These hardware items are designed to support and secure the conductors, insulators, and other components of the poleline system. Some common examples of poleline construction hardware include: Yokelink Flat Crossarm Brace used to support wood cross arms carrying tangent loads. Round corners on the brace ends prevent damage and reduce the possibility of injury. Hot dip galvanized meet ASTM A153 specification. Yokelink Alley Arm Brace used for side-arm construction, mounted to one side of the pole, mount at a 45 degree angle and come complete with solidly riveted lineman step. Hot dip galvanized meet ASTM A153 specification. Yokelink Insulator Brackets are used to mount post type insulators from 15kv to 34.5kv on the side of the pole. Hot dip galvanized meet ASTM A153 specification. Yokelink Cutout and Arrester Brackets are used for strength and mounting a variety of electrical equipment including arresters, cutouts, combination units and terminations. All components are Hot dip galvanized to meet ASTM A153 specification. Transformer Bracket, Brace, Cutout, Alley, Cross Arm Brace, Pole Band,utility pole Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com
Pole Line Fittings: These are various fittings and attachments that are used to connect conductors to the poles, insulators, and other components. Examples include pole brackets, crossarms, guy wire clamps, and pole bands.
Insulators: Insulators are used to support and isolate electric conductors from the pole or tower structure. They prevent the flow of electric current from the conductor to the ground. Insulators can be made of various materials such as glass, porcelain, or composite materials.
Anchoring and Guying Systems: These systems are used to provide stability and support to the poles or towers. They include guy wires, anchors, deadends, and turnbuckles.
Yokelink supply a full line of Poleline Hardware, we offer from the top of the pole to underground. Here are some of the pole line accessories that you are likely to use for your project
Floor maintenance should be treated differently
Poleline Construction Hardwares