When choosing a fan model, we choose a fan that is suitable for our own fan operating environment. In use, it also helps users save a lot of resources and exert full use effect in many fan components. Bearings are more important, but many users always ignore a lot of details in the selection and use of bearings, which is why the bearings always have problems in use, in fact, we not only have to choose from the guarantee, but also To pay attention to maintenance, the two-pronged approach can guarantee the use of the fan. Let's take a look at how the best we can do when selecting and maintaining the bearing. Let's take a look at it together: In the choice of fans, we often choose fans that have good appearance quality, but this is only a direction. We must also make a precise choice for the internal components of the fan. The bearing can be qualified. The key is to use it. Can not fully play its role, for users who do not have experience in fan selection, through the help of professional help, the quality of each component of the fan can be greatly guaranteed. After the selection is correct, we must use some of the fans in use. The problem is solved and the maintenance is done. Maintenance of fan bearings is not limited to adding lubricants. It is also necessary to control the quality and quantity of the lubricant, as well as the detailed inspection of the operating parameters of the lubrication system, as well as the centering of the shaft center line, mainly to check the radial eccentricity and axial offset. During the operation of the bearing, in accordance with the principle of “check every 15 minutes within 1 hour and check every hour within 6 hoursâ€, check the bearing temperature change phenomenon and keep abreast of the bearing temperature. The lubrication system of the fan is the most closely related to the bearing, so we must pay attention to the effectiveness of the lubrication system during maintenance. When the ambient temperature exceeds 40 °C, the time interval between the addition of the lubricant should be shortened to half of the specified time interval when the bearing temperature rise exceeds 15 °C. If the exhaust temperature is too high, check the operating conditions and restore the normal temperature of the exhaust. When there is too much lubricant in the bearing, restore the proper amount of lubricant and check the operation of the throttle valve. According to these maintenance knowledge, maintenance and repair of the bearing of the fan can also greatly reduce the wear of the bearing, which can save energy for the user. Therefore, it is necessary to give sufficient support for the selection and maintenance of the bearing. Pay attention to it. Concerned about surprises Label: Fan bearing maintenance precautions Previous: Follow-up and maintenance points of aluminum molds Next: Precautions for current transformer operation
AGLEX LED grow lights are with samsung leds and add other bands of lights to ensure well performance.
G series (Linear LED Grow Light design): 110W 220W available, with samsung LM301B 3500K 6500K and red 660nm
K series (Quantum board LED Grow Light design, dimmable. K360 is foldable): 90W 180W 360W available, with samsung lm301b, SMD 3030 3500K 6500K and 660nm
L series (LED Grow Light Bar design, dimmable and foldable): 700W available, with samsung lm301b, SMD 3030 3000K 5000K and 660nm 740nm
M series (LED Grow Light Bar design, dimmable and foldable, external driver): 240w 320w 400w 600W available, with samsung lm301b, SMD 3030 3000K 5000K and 660nm 740nm
Application:
Samsung LED Grow Light Light, LED Grow Light LM301B, Samsung LM301B Grow Light, LED Grow Light Samsung Shenzhen Ameri Technology Co., Ltd. , https://www.aglexz.com
Suit for marijuana, tomatoes, vegetable, strawberry, pepper, microgreen and herbal plants etc. And suit for all the growing stage.
For grow tent, greenhouse, vertical farming, commercial led grow lighting etc.
