LED magnetic rail is an innovative lighting system that combines LED lighting technology and magnetic technology. It uses magnetic suspension to fix the LED luminaire on the track to achieve convenient installation and positioning.
LED Magnetic Track Lighting has unique advantages. First of all, as a light source, LED has the characteristics of high brightness, low energy consumption, and long life, which can provide energy-saving and environmentally friendly lighting effects. Secondly, the magnetic technology makes the installation and disassembly of the lamp very simple, just align the lamp with the magnetic channel, and it can automatically adsorb and maintain a stable position. This design facilitates the replacement and adjustment of lamps without the use of tools or cumbersome fixing operations.
Magnetic Rail,Magnetic Track Rail,Magnetic Track System,Magnetic Channel,Magnetic Wiring SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com
In addition, with the advent of high-speed milling, cutting speeds and feed rates are increasingly becoming faster. Although the cutting speed and feed speed of turning are also improved, there is no large change in milling. The reason is that turning (continuous cutting) and milling (interrupted cutting) are different, mainly in the following aspects:
(1) Since the turning is performed by the rotation of the workpiece, it is difficult to maintain the clamping rigidity of the workpiece, reduce the amount of unbalance, and increase the cutting speed.
(2) Compared to interrupted cutting, turning with continuous cutting has a more adverse effect on tool life.
Therefore, it is difficult to achieve high precision and high efficiency machining when cutting with small depth of cut, high cutting speed, and fast feed cutting conditions. However, turning machining is also seeking new developments, and development of technologies required for intensive processing, rapid production, simplification of production equipment, short-term processing cycles, and low cost are being carried out. CNC compound cutting is a trend that requires turning and turning tools and can process a wide range of shapes.
This article provides an introduction to the latest developments in turning operations and the latest developments in high value-added processing tools.
Turning <br> with two latest trends <br> tool for turning the coated cemented carbide insert has been based, requires a long blade life, high reliability, and other features can adapt to high-speed cutting. Due to the development of the net forming technology of the workpiece blank, the machining allowance is gradually reduced and the cutting is more stable, so the tool life becomes the key to selecting the tool. The method of improving tool life does not improve the shape of the cutting edge like an end mill. Instead, it develops countermeasures against the tool material to improve the wear resistance of the carbide coating to extend tool life. In addition, a few years ago, an indexable insert having a special tip shape (a shape having a milling cutter effect) that improves the feed amount without lowering the surface roughness of the cutting surface has appeared.
2.1 The tool material for turning the indexable insert is mainly coated with cemented carbide. However, in recent years, the development of new coatings and matrix materials for high-speed cutting and tool life improvement has made great progress. Coated cemented carbides have also developed in recent years, such as cermets with high adhesion resistance, high-speed cutting in the finishing of steel below HRC40, and low surface roughness; but it is cutting Heat resistance and impact resistance are poor, so the scope of application is limited. If a cermet (smooth PVD TiAlN coating) coating is used, it is possible to ensure a low surface roughness and an increase in wear resistance for extended tool life.
Previously, CBN tools were used to process high-hardness steels with hardnesses up to HRC50. Now, due to the improved performance of coated carbide inserts, it is also fully capable of cutting high hardness steels, thus increasing the application range of coated carbide inserts. .
The indexable inserts for turning mainly use CVD coating technology to improve the bonding strength and reliability of the coating. The wear resistance and chipping resistance have been greatly improved compared with the past. The following is a detailed introduction:
(1) Improvement of wear resistance In practical applications, the adhesion strength of the cemented carbide substrate and the coating can be improved by thick filming of the fine particle Al2O3 smooth coating, thereby improving the wear resistance; and also by increasing the TiAlN coating The proportion of Al in the layer enhances the wear resistance.
The indexable insert for turning cast iron can meet high-speed cutting conditions and extend tool life by removing the TiN layer of the rake face and adding special coatings (increasing the bond strength and the wear resistance of the rake face). The Si-based composite film (a coating of an amorphous Si-N nanocomposite structure) is characterized by oxidation resistance (an initial oxidation temperature of 1100 ° C or higher, a general TiAlN coating of 900 ° C or higher) and high hardness, and is capable of cutting cast iron at high speed. (300m/min or more).
(2) Anti-cracking improvement The surface strengthening and toughening treatment of the cemented carbide substrate (ultrafine particle alloy) can prevent chipping and breakage of the blade edge during cutting, so the tool manufacturer improves the coating substrate. Never stopped. At the same time, the improvement of the bonding strength between the substrate and the coating is adopted as a key measure for improving the reliability and life of the tool in the coated cemented carbide. For example, experimental reports have shown that if the surface roughness of the cemented carbide substrate is increased, the bonding strength of the coating is increased. Therefore, research results on the surface characteristics of the cemented carbide substrate are just around the corner.
(3) Reduction of bonding phenomenon In the turning process of SCM-based steel with high softness and high toughness, the blade cutting edge is prone to material adhesion, causing peeling and chipping of the coating. Blades that use a special Ti compound to smooth the surface of the coating can inhibit chipping and sticking.
(4) The blade edge is sharper to prevent the coating of the coated carbide blade from peeling off. The general method is to make the cutting edge into an R shape. The blades used for cutting small parts and grooves are sharp, so PVD coating thickness is best controlled at 3μm.
2.2 The shape of the blade is the closest, which can reduce the positive rake angle of the cutting resistance. The three-dimensional complex curved shape has more chipbreaking grooves, which are mainly divided into double-sided chip breaking groove and single-sided chip breaking groove. The former is suitable for light cutting with small depth of cut. Suitable for heavy cutting with deep cut depth.
Since the shape of the blade is a three-dimensional CAD design method, the development capability is remarkably improved, and as the forming technology advances, the shape of the free-form surface can be accurately displayed. For example, the precise formation of fine portions such as the chamfered shape of the blade edge portion is more advantageous for the improvement of the cutting performance.
The unique blade shape of the four-corner blade with 45° angles can meet the cutting conditions of high-speed and fast feed in medium and coarse cutting, inhibiting the occurrence of boundary wear, and is expected to improve the machining efficiency in the turning of heat-resistant alloys and titanium alloys. Extend tool life and improve chip handling.
In order to pursue the high efficiency and high precision of turning machining, in the past few years, various cutting tool manufacturers have developed a blade shape with a wiper function, that is, the blade edge R and the straight blade edge have a similar blade milling light. The edge of the blade. When finishing with a wiper blade and an R-shaped tip blade, the feed rate can be increased without lowering the finish, and high-efficiency and high-precision machining can be realized.
When cutting with a blade with a light-removing function, it needs to be corrected during programming because it has a different cutting edge position than a conventional rounded blade.
For the grooving and cutting blades, the shape of the independent chipbreaker that is press-formed and the concave shape that can withstand the cutting force are used. This high-performance grooving and cutting blade with complex shape made by molding technology has been produced by professional cutting tool manufacturers.
Turning three <br> <br> holder with the latest trends in high efficiency, high-precision cutting target, the role holder is growing.
3.1 Tool holders that give full play to the performance of the inserts It is well known that indexable turning tools are often used in turning. The rigidity of the insert clamping plays a decisive role in the stability, elongation and machining accuracy of the tool life. If the fixing pin and the platen are used for the blade fixing method at the same time, the method has high rigidity and reliability and is widely used.
3.2 Tool-integral turning tool With the popularization of CNC compound turning center, a tool design solution that can be used with the machining center has appeared. In this solution, the turning tool and the tool holder are integrated, and the proximity to the workpiece is good. Stable and precise cutting. In particular, the composite tool holder can be installed with three different turning tools at the same time, which saves the tool changing time and can complete the continuous processing of different processes such as roughing, finishing, outer circle and thread, thus achieving efficient processing. The tool holder is equipped with a (spray coolant, air, cutting fluid) injection hole that can supply coolant to both turning tools at the same time, and can be cooled smoothly.
The latest trends in the four turning process 4.1 Multi-function cutting tools The multi-function cutting tools used in the CNC compound turning center make the cutting process diversified due to the different blade shape and tool structure. The use of such a tool to machine a part is simpler than the use of a general-purpose tool such as an inner-outer turning tool, an inner-outer thread turning tool, an end mill, and a drill bit. There are coatings on the market that can be applied to the processing of small parts.
4.2 Milling tools for turning Machining is usually performed with a turning tool. If an end mill is used to machine the cylinder, the effect of high efficiency and chip breaking can be achieved. It is well known that interrupted cutting of end mills is advantageous in extending tool life compared to continuous cutting of turning. With the popularization of CNC composite turning centers, the processing of composite cutting with turning and milling will continue to increase.
Conclusion <br> <br> using five mills and other milling tools so that partial substitution of turning cutting into a diversified era, the emergence of complex CNC turning centers of the cutting of production ushered in a huge turning point .
New ideas such as the sharing and multi-functionality of turning tools and machining centers are emerging. In the production of varieties and production volumes, CNC composite cutting technology has attracted much attention for its intensive, short construction and low cost. . In order to complete complex machining processes and reasonable cutting operations, many cutting tools are required, and the capacity of the tool magazine is limited. Therefore, it is expected to develop a variety of shapes, sizes, and precisions with a minimum number of cutting tools, blade shapes, and high-life tool materials. Processing.
Cutting tool manufacturers, tool holders, tool system manufacturers, CNC machine tool builders and users should join hands to advance advances in turning technology.
Development trend of turning processing
Introduction The development of a <br> <br> today's manufacturing requirements shorter delivery time, low processing costs, the traditional mode of production has been difficult to adapt, therefore, CNC turning centers class of composite-intensive machine concern. Parts have tended to be a composite of a variety of composite shapes, consisting of a cylindrical surface and a flat surface, with holes on different sides, and so on. In order to machine such parts, in addition to turning, other cutting capabilities must be available. If the CNC composite turning center is used, multiple machining operations can be completed on one machine to achieve intensive machining. With this trend, turning tools for CNC compound turning centers have emerged.