Flooring Flooring Selection Flooring Brand Razor Barbed Wire,Plastic Barbed Wire,Galvanized Barbed Wire,Steel Razor Barbed Wire Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com
First of all, the requirements for laying of anti-static flooring on the laying site are very high. For example, the laying of the floor should be carried out after the indoor civil works and renovations, and the floor must be flat, clean and dust-free, and the heavy equipment is also the point. The base shall be fixed and the equipment shall be installed on the base. The height of the base shall be the same as the height of the top surface of the floor, so pay attention to these.
Second, in the construction process must also be cautious and careful to do a serious inspection of the ground flatness and wall verticality, if found not meet the construction requirements, should be proposed to the relevant departments of Party A, for the bracket to be installed to the same adjustment The required height and the brackets are placed at the intersection of the grid lines on the ground; of course, the floor is placed on the assembled beam by means of a suction plate, and if the remaining size of the wall is smaller than the length of the floor itself, the method of cutting the floor can be used to fight. Make up.
There is also strict maintenance requirements. In general, anti-static flooring is prohibited from using sharp instruments directly on the surface of the floor directly to prevent damage to the surface of the anti-static properties, if prohibited during use from the high It will jump to the floor directly, prohibiting brutal operation when handling equipment, and bruising the floor. This will not only affect the aesthetic effect, but more importantly affect the results.
What is the anti-static floor construction process? The expert on this site, Mr. Zhao, has briefly stated this issue. I believe that everyone will benefit from reading it. The anti-static floor construction process is relatively high compared to other floor types, so friends who use anti-static floor installation must pay attention to this point.
Anti-static floor construction process is what
Anti-static floor construction process is what? The installation steps and processes required for the installation of each type of floor are different. I believe this is not difficult to understand. Among the many types of flooring, anti-static flooring is a floor type that is more popular among consumers. However, the installation requirements for anti-static flooring are also relatively high. Today, the author invited Mr. Introduce the anti-static floor construction process and hope to help everyone.