Aluminum oxide can be in continuous grinding to form new edges and is better than other abrasive grinding. Aluminum oxide cloth can be used for narrow belt, Flap Disc , and flap disc, for polishing pine wood, log board, furniture, handcraft products and vine products.
Abrasive Cloth is the cloth with grinding compound. According to the different grinding compound, the abrasive cloth can divided into four kinds: Aluminum Oxide Abrasive Cloth, Silicon Carbide Abrasive Cloth, Zirconium Oxide Abrasive Cloth and Calcined Aluminum Oxide Abrasive Cloth and so on. According to the hardness, it also can be divided into flexible abrasive cloth,middle flexible abrasive cloth and hard abrasive cloth. Some of them can do waterproof or oil-proof. The shape of the abrasive cloth is roll, belt and sheet. The abrasive cloth is generally used for wood grinding and metal grinding. It can available in vary grits.
After 30 years` development, abrasive cloth grinding has become a complete and self-contained system of new processing technology. Because of its high processing efficiency, wide application range, strong adaptability, low cost, safe and convenient operation, it is well received by customers. In foreign countries, Abrasive Belt grinding technology has made great progress. It can be applianced for more and more processing object . It can process almost all engineering materials, from the general daily life appliance to application of large aerospace equipment.
If you have any questions, please contact with us directly. The abrasive cloth are produced with high quality and good appearance. Welcome you can visit our factory for inquiry. Please send mail directly to us.
Advantages of Aluminum oxide abrasive cloth:
High quality and low price,
Available in vary grit.
Aluminum Oxide Abrasive Cloth Aluminum Oxide Abrasive Cloth,Narrow Abrasive Abrasive Cloth,Cotton Abrasive Cloth,Soft Abrasive Cloth Jiangsu Fengmang Compound Material Science & Tech Group CO.,LTD , http://www.fmabrasive.com
Among them, exports were 42.416 billion US dollars, down 21.04% year-on-year, only 0.16 percentage points higher than last month, 1.34 percentage points faster than the national foreign trade export rate; import 35.652 billion US dollars, down 20.7% year-on-year, 0.29 percentage points higher than the previous month. The national foreign trade import rate fell by 10.2 percentage points. The accumulated trade surplus was 6.763 billion US dollars.
In March, the machinery industry achieved a total import and export value of 28.875 billion US dollars, down 21.17% year-on-year, of which exports were 15.48 billion US dollars, down 21.21% year-on-year, and imports were 13.286 billion US dollars, down 21.13% year-on-year. The amount of imports and exports in the month has been freed from the monthly decline since the beginning of this year. In March, it increased by 6.349 billion U.S. dollars from February, and the trade volume also turned from a deficit of 230 million U.S. dollars to a surplus of 2.221 billion U.S. dollars.
The export rate of machinery industry slowed down in the month, and imports are still falling.
In the 13 industries that counted, the trend of the previous month continued. Except for the heavy machinery industry, all other industries fell in double digits. Exports in March (-21.21%) slowed down by 6.71 percentage points from the previous month; imports (-21.13%) accelerated by 7.74 percentage points from the previous month.
From the perspective of exports, the top five exports of the 13 industries in the month are: electrical appliances, petrochemicals, automotive, cultural office equipment and instrumentation industry. Exports that fell more than 30% year-on-year were in the automotive industry (-37.83%), construction machinery (-32.77%) and machine tool (-30.04%).
From the perspective of imports, the top five imports of the 13 industries in the month are: electrical appliances, instrumentation, petrochemical GM, automotive and other machinery industries. The year-on-year decline in imports was followed by other machinery (-35.95%), automobiles (-33.42%), and food packaging machinery (-28.23%).
Import and export of six provinces and cities maintained growth, accounting for 67% in the western region
From January to March, the machinery industry in the 31 provinces (municipalities) and autonomous regions, the cumulative growth of imports and exports in six provinces and cities maintained growth, mainly concentrated in the western region, accounting for 67%. The highest increase was in Guizhou Province (80.72%), followed by Hainan Province (64.47%), Sichuan Province (31.19%), Yunnan Province (16.22%), Henan Province (12.2%) and Shaanxi Province (11.88%).
Analysis of the Import and Export of Machinery Industry in 2009
According to customs statistics, the total import and export value of the machinery industry in the first three months of this year was 78.068 billion US dollars, down 20.89% year-on-year. The growth rate was basically the same as last month (-21.11%), only 0.22 percentage points higher than the national foreign trade. The decline in exports fell by 4.01 percentage points.