Musk Ambrette is a nitromusk once in common use, but now widely-regarded as toxic. Nitromusks are a group of synthetic fragrance chemicals typically used in cosmetics, perfumes, air fresheners, cleaning products, detergents, soap, and many other everyday products with artificial scents. Exposures to nitromusks in the general population are widespread, due to their presence in this broad variety of consumer goods.
Musk Ambrette Musk Ambrette,Purity Musk Ambrette,Ambrette Musk Crystals,Musk Ambrette Definition Gan Su Original Flavor Co.,ltd , https://www.futureperfume.com
Electronic Patrol Technology Type
First, off-line electronic patrol off-line patrol system. Compared with on-line type, this method has the advantages of being easy to carry, no wiring, simple installation, not affected by temperature and humidity, and not easy to be destroyed. This solves the problem of expensive investment, and realizes system expansion and line change. It's easier. Once the products were popularized, they were very popular among users. At present, off-line patrols have become mainstream products in the domestic market and occupy about 90% of the market share. Offline patrol system is divided into contact and inductive.
Second, the contact patrol system contact patrol system, also called information button patrol products. The working procedure is to install the information button (also called Ibutton, TM card) at the patrol point. When the patrol personnel patrol, they hold a patrol machine (or called a patrol stick) to each point and touch the information button. The patrol machine reads the information button data. After completing the entire patrol mission, to the monitoring center, the management personnel will transfer the information stored in the handheld patrol machine (stick) to the computer through software, analyze the patrol data and generate a printed report for inspection. The advantage of the TM card is that its number is the only one in the world, free from electromagnetic interference, and there is no error in reading; In addition, it has strong physical properties, is not afraid of rain and snow, is resistant to high and low temperatures, and is superior in corrosion resistance. It is generally suitable for use in harsh environments. .
However, due to the "contact" of such a system, some drawbacks are revealed: First, the patrol (patrol stick) and the information button must be in close contact with each other to read information, which is inconvenient to operate, especially at night. , The light is not good, not easy to identify; Second, the exposed metal shell of the information button is vulnerable to contamination, resulting in poor contact, resulting in failure to effectively collect information; Third, the exposed information button is easily destroyed.
Third, the induction patrol system Inductive patrol system is mainly the application of radio frequency identification technology (RFID) in the patrol system. Its advantage is that there is no need to touch the information button when reading data: When the patrol personnel arrive at the patrol point, as long as the patrol machine is close to the information button, the patrol machine can automatically detect the information point information and automatically record it. . Since the read button does not need contact, the patrol button can be embedded in a concealed object, such as a wall, so that people with ulterior motives cannot know the location of the tour, and fundamentally solve the problem that the information button is destroyed. At present, inductive products have become the mainstream in the patrol market, accounting for about 70% of the proportion.
In addition, after using RFID technology, patrol personnel will report patrol data more quickly after work. In one minute or so, the information transmitter can collect all the information in 10 or 20 patrol machines at the same time. The technology of this long-range electronic patrol system greatly exceeds the old-style contact electronic patrols and proximity-sensing electronic patrols and will become a new generation of products.
Electronic Patrol Community Application
In order to strengthen the safety management of community management and the management of security guards on duty, this security patrol plan is designed. The security inspection management system is used for effective sign-in management of security patrols. Through the patrol system, the security guards patrol the floors according to the patrolling management regulations stipulated by the Property Management Department to detect hidden dangers and resolve them in time. This inspection method can greatly enhance the security of the community and the inspection of security watchers. Effective supervision and management.
The patrol point information button is placed at the place where inspection is needed. It stores the information of the geographical location. The patrolling staff is equipped with an identification button, which stores the identification information of the patrolling personnel. The patrolling personnel use the patrol bar to first touch the identification button and then to each inspection. Touch the patrol point information button, the inspection bar will automatically generate a patrol record including the person, place and time. Then insert the patrol stick into the data transmitter, and within a few seconds, enter the patrol record into the computer and press Request to generate an inspection report. The inspection report can truly and accurately reflect the inspection status: whether there is any missing inspection, whether it is on time, whether it is inspected according to the specified route, etc.
The system has the following features:
1, high reliability: inspection rod as a whole made of stainless steel, durable. Not afraid to fall, shock, moisture, anti-static, waterproof performance. Fully suitable for patrol application environment. Non-volatile memory is used in the inspection rod to ensure that data will not be lost, even if the power-off data can still be stored for several years.
2. High technical content: The inspection stick has a built-in microcomputer and a real-time clock, which can store 2000-4000 inspection records. The low-power design makes it unnecessary for the inspection stick to have a charging device. A battery can be used for more than one year and its use cost is low. Another advantage brought by this design is to ensure that no program operation failure occurs.
3, the use of simple and convenient: patrol bar without switch and button design, you can use without training. The software uses a full Chinese menu and is easy to learn and operate.
4. The patrol point is easy to set: The information button used in the inspection point is stainless steel, with waterproof, antimagnetic, shockproof, high temperature and low temperature, no need for excellent performance such as power supply, low cost, easy installation, no matter in environmental adaptability or performance. The price ratio is the preferred carrier for inspections.
5, the overall system performance and price ratio, application is simple, technical skills, lower prices. The system consists of four parts: the patrol information button, the patrol bar, the data transmitter, and the system management software.
The working principle is to set an information button at each inspection point (it is a passive, button-sized, stainless steel-encased storage device). The information button stores the geographic information of the inspection point; the inspector holds the stainless steel inspection. Sticks, when they arrive at the inspection point, they only need to touch the information button embedded in the wall (on the tree or other supports) with a patrol bar, that is, automatically record the time, location, and other data that arrive at the inspection point. On the stick. After the inspector completes the inspection, the inspection bar is inserted into the communicator and all inspection records of the inspector are transmitted to the computer. The system management software immediately displays the route inspected by the inspector, the time and name of each inspection point, and missed inspections. Checkpoints and generate inspection reports as required. 
Analysis of Electronic Patrol Technology Types and Their Application Benefits in Intelligent Community
The electronic patrol system is a means by which a manager checks whether the patroller arrives at a designated place on the patrol route at a given time. The patrol system helps managers understand the performance of patrollers, and managers can change patrol routes at any time to meet the needs of different occasions.