1j50 Soft Magnetic Alloy Wire Hy-Ra49

medium permeability of medium magnetic saturation soft magnetic alloy

This kind of alloy of nickel content in 45% ~ 50%.The saturated magnetic induction intensity from 1 to 1.5 T, higher than that of high permeability alloy under high magnetic saturation alloy, its permeability and coercive force between the two types of alloys.Mainly used for the secondary magnetic field work of all kinds of transformers, relays, electromagnetic clutch, iron core, the resistivity of this kind of alloy of high magnetic full alloy than the high resistivity, and thus can be applied to high frequency.

Chemical composition

composition	C	P	S	Mn	Si
	≤
Content(%)	0.03	0.02	0.02	0.6~1.1	0.3~0.5

 

composition	Ni	Cr	Mo	Cu	Fe
Content(%)	49.0~51.0	-	-	0.2	Bal

Physical properties

Shop sign	Linear expansion coefficient	Resistivity (μΩ·m)	Density (g/cm³)	Curie point (ºC)	Saturation magnetostriction coefficient  (10-6) Â
Ni50	9.20	0.45	8.2	500	25.0

 
Heat treatment system

shop sign	Annealing medium	heating temperature	Keep the temperature time/h	Cooling rate
  1j50	Dry hydrogen or vacuum, pressure is not greater than 0.1 Pa	Along with the furnace heating up 1100~1150ºC	  3~6	In 100 ~ 200 ºC / h speed cooling to 600 ºC, fast to 300 ºC draw a charge

 



Soft magnetic alloy are in weak magnetic field with high permeability and low coercive force of alloys.This kind of alloy are widely used in radio electronics, precision instruments and meters, remote control and automatic control system, the combination is mainly used for energy conversion and information processing, the two aspects of is an important material in the national economy.

2.Usage 
It is mostly used in small transformers, pulse transformers, relays, transformer, magnetic amplifier, electromagnetic clutch,the reactor coreand magnetic shielding which work inweak magnetic orsecondary magnetic field.
 
3.Features 
1).Low coercivity and magnetic hysteresis loss;
2).High resistivity and loweddy-currentloss;
3).High initialmagnetic permeability and maximum magnetic permeability;
4).High saturation magnetic flux density;
 
4. Packing detail
 
 1). Coil (plastic spool) + compressed ply-wooden case + pallet 
 2). Coil (plastic spool) + carton + pallet  
 5. Products and services
 
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Fast delivery;
 

1j50 Soft Magnetic Alloy Wire Hy-Ra49

medium permeability of medium magnetic saturation soft magnetic alloy

This kind of alloy of nickel content in 45% ~ 50%.The saturated magnetic induction intensity from 1 to 1.5 T, higher than that of high permeability alloy under high magnetic saturation alloy, its permeability and coercive force between the two types of alloys.Mainly used for the secondary magnetic field work of all kinds of transformers, relays, electromagnetic clutch, iron core, the resistivity of this kind of alloy of high magnetic full alloy than the high resistivity, and thus can be applied to high frequency.

Chemical composition

composition	C	P	S	Mn	Si
	≤
Content(%)	0.03	0.02	0.02	0.6~1.1	0.3~0.5

 

composition	Ni	Cr	Mo	Cu	Fe
Content(%)	49.0~51.0	-	-	0.2	Bal

Physical properties

Shop sign	Linear expansion coefficient	Resistivity (μΩ·m)	Density (g/cm³)	Curie point (ºC)	Saturation magnetostriction coefficient  (10-6) Â
Ni50	9.20	0.45	8.2	500	25.0

 
Heat treatment system

shop sign	Annealing medium	heating temperature	Keep the temperature time/h	Cooling rate
  1j50	Dry hydrogen or vacuum, pressure is not greater than 0.1 Pa	Along with the furnace heating up 1100~1150ºC	  3~6	In 100 ~ 200 ºC / h speed cooling to 600 ºC, fast to 300 ºC draw a charge

 



Soft magnetic alloy are in weak magnetic field with high permeability and low coercive force of alloys.This kind of alloy are widely used in radio electronics, precision instruments and meters, remote control and automatic control system, the combination is mainly used for energy conversion and information processing, the two aspects of is an important material in the national economy.

2.Usage 
It is mostly used in small transformers, pulse transformers, relays, transformer, magnetic amplifier, electromagnetic clutch,the reactor coreand magnetic shielding which work inweak magnetic orsecondary magnetic field.
 
3.Features 
1).Low coercivity and magnetic hysteresis loss;
2).High resistivity and loweddy-currentloss;
3).High initialmagnetic permeability and maximum magnetic permeability;
4).High saturation magnetic flux density;
 
4. Packing detail
 
 1). Coil (plastic spool) + compressed ply-wooden case + pallet 
 2). Coil (plastic spool) + carton + pallet  
 5. Products and services
 
1). Pass: ISO9001 certification, and SO14001cetification;
2). Fine after-sale services;
3). Small order accepted;
4). Fast delivery;
 

Aluminum Spiral High Speed Door

The Spiral door offers high-speed operation for high-traffic situations and rigid aluminum slat construction that eliminates the need for a second security door. Crisp lines give the Spiral door a stylish look that's great for many types of commercial, automotive retail, government, institutional and industrial applications. The Spiral is ideal for automotive dealerships, government, parking and security. Benefits No metal-to-metal contact reduces wear on the door panel and offers fast, quiet operation.

Aluminum spiral High Speed doors are usually used wherever goods traffic occurs and where the doors have to fulfill special requirements. In the food and beverage industry, or Medical industry for example, special climatic conditions have to prevail; short opening and closing times reduce cooling loss, avoid airflow and enable a smooth operating procedure. They can also be designed in larger dimensions for the mining and aircraft industries.

Aluminum Spiral High Speed Door,Simple Hard Fast Door,High Speed Spiral Door,Metal Hard Fast Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hffreezerdoor.com