What is the waterborne epoxy floor paint? Xiaobian encountered such a problem for the third time, but Xiaobian has only come out with seven or eight points. If you want to say that you have seen it, you may not remember it for a while, but if I tell you the green floor of the gym, you may have an impression. There is a gymnasium on the west side of the playground of the school where Xiaobian is located. After being used, Xiaobian will introduce you to the related content of waterborne epoxy floor paint . The waterborne epoxy floor paint construction process is before the construction primer, the original cement floor requires hard, smooth, no sand, no empty drum, peeling, cracks, etc., such as cement floating pulp, old paint and adhered garbage on the ground. The sundries need to be completely removed; the greases and impurities must be cleaned with a cleaning agent. Special treatment should be carried out on the serious oil stains to avoid poor adhesion; if it is a smooth surface such as terrazzo, floor tiles, etc., it must be ground into a rough surface; There should be no water accumulation or obvious leakage on the base surface; the relative humidity at the site should be less than 85% during construction, there is no obvious "return" phenomenon; the ambient temperature is above 5 °C. The two-component mixing on the construction site should be sufficient and uniform. The cement floor paint construction process requires high enough shear force. It is best to use a hand-held electric mixer to stir the paint at a speed of 400-800r/min for several minutes. The epoxy resin can be emulsified into smaller particles. During the construction, it is necessary to master the use time of the paint. The paint can be reasonably adjusted according to the applicable period of the paint and the number of construction personnel on the site, so as to avoid excessive distribution of the paint once, which is wasteful over the use time. Plain treatment 1 The basic plain is based on cement powder or grindstone; 2 The ground needs to be maintained for more than 28 days, and the water needs to be less than 8% before the construction can be removed if there is unevenness or empty drum; 3 fill the ground with epoxy mortar; 4 oily soil should be cleaned thoroughly; Undercoat 1 Keep clean before construction. If there is any adhesion, remove the main agent and hardener according to the correct ratio and stir well. 2 It is necessary to adjust the appropriate viscosity according to the ground conditions. The finished material needs to be completed within 4 hours. Medium coating 1 It needs to be kept clean before construction. If there is any adhesion, remove the main agent and hardener according to the correct ratio and stir well. 2 adding the appropriate amount of the mixed resin to the quartz sand; 3 evenly apply the material by using a file; 4 mixing completed materials can be completed within 30 minutes of construction; 5 The construction junction is well handled; 6 medium coating curing time is about 8 hours or more. Batch coating 1 Mix the main agent and hardener in the correct proportion and stir well; 2 Use a batch knife to coat the material evenly; 3 The completed material needs to be completed within 30 minutes; 4 batches of soil curing time is about 8 hours or more; Top coat 1 Keep clean before construction, if there is any adhesion, remove it; 2 before use, the main agent is stirred first; 3 Mix the main agent and hardener according to the correct ratio and stir well; 4 Use a roller or trowel to evenly coat and mix the material to complete the construction within 30 minutes; 5 The construction junction must be handed over. The above content is a wonderful introduction of waterborne epoxy floor paint. I hope that every reader can listen and use it in real life, and you will benefit a lot. Well, today's introduction to the content of waterborne epoxy floor paint is here. Thanks to the readers for reading this article and for the support and love of Xiaobian, if you want to get more home decoration information, please Continue to pay attention to the decoration home network. More related wonderful reading: How to do the floor paint? Common sense of floor paint Floor paint construction team selection skills, floor paint common sense introduction Epoxy floor paint top ten brands have epoxy floor paint buying skills Outdoor epoxy floor paint interpretation of outdoor epoxy floor paint maintenance Epoxy anti-static floor paint floor maintenance and construction process Epoxy floor paint construction process epoxy floor advantages
From Concept to Completion
Achieve seamless production with one
integrated solution:
The galvanized Steel Truss Systems provide
greater strength non-combustible, termite free roofs, and many savings compared
to using wood trusses. Using Light Gauge Steel Trusses can greatly reduce costs
associated with materials, labor, shipping and reduce construction time.
Advantages of Light Gauge Steel Trusses:
Sturdy product withstands far more wind
damage than wood trusses.
Lightweight product is 1/3 to 1/2 the
weight of wood and can be sent to job site in larger loads, saving precious
project time.
Easy and fast to erect. Less dead load for
the supporting structure. Require less lifting, handling and bracing than many
other truss systems.
Design flexibility. Create nearly any
design you can imagine. Up to 80 feet long clear-san capabilities and ceiling
and roof profiles without limit.
Pre-engineered and pre-fabricated by truss
professionals.
Compatibility tested with nearly all
decking and roofing systems.
Time-saving: Lightweight product allows for
ground-assembly before raising the pre-built product into final position
through use of a crane.
Long-term protection against insects. No
chemical treatment necessary for the life of the product
Quacent Truss System FeaturesQuacent Truss System Features
Based on our one of the world best fully
automatic cold roll forming machine, we offer
light gauge steel truss for roof and floor
with the following characters,
• Fully
engineering data
• Virtually
unlimited truss design - extremely versatile
• Chord
and webs in one plane
• Lightweight
and easily handled on-site
• Strong
weak axis performance - helps prevent damage in handling, reduces
bracing requirements, and provides solid
footing for installers and other trades
• High
strength to weight ratios
• Long
span capabilities
• Mechanically
fastened - no welding
• Layout,
design and engineering, and fabrication drawings accomplished with
state-of-the-art software
Material: High tension Galvanized Light
Gauge steel, G550
Thickness: 0.55mm/0.75mm/1.0mm,
Specs: Zinc & Aluminum coated with 150g/m2+
Light Gauge Steel Truss and Joist Steel Trusses,Light Gauge Steel Trusses,Light Gauge Steel Roof Trusses,Light Gauge Steel Joist,high quality steel truss Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com
