Logs and solid wood are made from natural materials and have a high degree of environmental protection. They are used more commonly in our lives. What are the differences between logs and solid wood ? There are usually not too many contacts. Today we introduce the following related content. Let's take a look at the difference between logs and solid wood ! The difference between logs and solid wood One difference: Logs are widely used and can be divided into: direct use and chemical or special processing to use raw materials, such as paper, rayon, regenerated cellulose, etc. Solid wood is generally used for making furniture items. Pure solid wood furniture is a natural material that does not undergo any processing. For example, a table top, a door panel, a side panel, etc. are made of solid wood panels. The difference two: There are many kinds of solid wood materials, such as mahogany, birch, beech, paulownia, manchurian ash, maple, rosewood, rosewood mahogany, red dragonfly, etc., used to make furniture, pendants, evil spirits and other products; logs can be directly Used in construction materials, electric columns, craft carvings, sports equipment, and culture and education supplies. The difference three: Logs generally refer to woods that have not been processed or have only been rough-processed; so-called solid wood is a variety of pure wood furniture and finishing materials processed from natural (logs). Difference four: The standard specifications of logs are no more than 12cm or 40 inches, run-cut material is 260cm-320cm or more, and the diameter is not more than 120cm. Solid wood standard specifications, as long as they meet the basic elements of wood, can create products. After the solid wood panel paints, the surface has no glue joints and unevenness, and the physical properties are stable during long-term use. This is the characteristic of solid wood. In fact, the main difference between logs and solid wood is reflected in the use and the size of the grinding, because the two kinds of wood processed through different processes, so the use of effects and manufacturing furniture will be different, but also allow them to use their own different areas. Original wood and solid wood performance characteristics Logs are naturally healthy and have a natural wood texture without chemical pollution. Logs have a long life span and can be used for more than a few decades. Logs have high value preservation due to the precious and non-renewable nature of raw materials. However, the shortcomings are also very obvious. Raw wood products are easily affected by the environment, causing thermal expansion and contraction. The utilization rate of solid wood is relatively high, which is in line with the principle of ecological utilization of raw materials. In terms of use and texture, solid wood panels are more suitable for the production and decoration of furniture. However, there are also some deficiencies in solid wood furniture, such as easy to deform and difficult to maintain; can not let direct sunlight, can not be too cold or too hot; avoid use in dry or humid environment. Regarding the difference between logs and solid wood , I will briefly introduce them here and I hope to help you. If you want to learn more relevant knowledge, you can pay attention to this site information, more exciting content waiting for you. The difference between logs and solid wood Aluminum Disc,3003 Aluminium Disc,3003 Aluminium Circle,Dc Aluminium Circle Zhengzhou Yearshine Industry Co., Ltd , https://www.zzyscorp.com
