Product Picture :
Applications :
♦Signal system , emergency lighting system , security system
♦Telecommunication Equipment
Fetures :
♦Image of LCD graphic symbol
♦Automatic Identification System Voltage level
♦Intelligent PWM charge mode
♦Automatic Temperature Compensation
♦Adjustable charge-discharge control parameters
♦Settable Operating mode of Load
♦Accumulated function of charge and discharge Ampere hours
♦Remote monitoring and control function
♦Battery reverse-discharge protection
♦Battery low Voltage Disconnection(LVD)
♦Battery reverse connection protection
What are the specific steps for the installation method of Dongguan planetary reducer? Dongguan planetary reducer is one of the reducers, and the volume is also very small, but it does not mean that the function is very small. This type of reducer has the advantages of high transmission efficiency, wide deceleration range, high precision, etc., so it is favored by many industries.
Correct installation, use and maintenance of the reducer is an important link to ensure the normal operation of mechanical equipment. Therefore, when installing the Dongguan planetary reducer, be sure to strictly assemble and use in accordance with the following installation and use related matters.
The first is to confirm whether the motor and the reducer are intact from the installation, and strictly check whether the dimensions of the parts connected to the motor and the reducer match. Here is the size of the motor positioning boss, the input shaft and the reducer groove and the tolerance .
In the second step, unscrew the screws on the dust holes on the outside of the reducer flange, adjust the PCS system clamping ring so that the side holes are aligned with the dust holes, and insert the inner hexagon to tighten. After that, remove the motor shaft key.
The third step is to connect the motor with the reducer naturally. The connection must ensure that the output shaft of the reducer and the motor input shaft have the same concentricity, and the outer flanges of the two are parallel. As if the inconsistency of the heart is inconsistent, it will cause the motor shaft to break or the gear reducer to wear.
In addition, during installation, it is strictly prohibited to hit with a hammer or the like to prevent excessive axial or radial forces from damaging the bearings or gears. Be sure to tighten the mounting bolts before tightening the tightening bolts. Before installation, wipe the antirust oil of the motor input shaft, positioning boss and reducer connection with gasoline or zinc-sodium water. The purpose is to ensure the tightness of the connection and the flexibility of operation, and to prevent unnecessary wear and tear. Before connecting the motor to the reducer, the key slot of the motor shaft should be perpendicular to the tension bolt. In order to ensure uniform force, first screw the mounting bolts at any diagonal position, but do not tighten, and then screw the other two mounting bolts at the diagonal position and then tighten the four mounting bolts one by one. Afterwards, tighten the tightening bolts. All tightening bolts need to be fixed and inspected with the torque wrench according to the fixed torque data indicated.
The correct installation between Dongguan planetary reducer and mechanical equipment is similar to the correct installation between reducer and drive motor. The key is to ensure that the output shaft of the reducer is concentric with the driven shaft. 
================================================== ================================================== ======
♦Solar and wind energy storage system
♦EPS and UPS battery backup
♦Power plant and transmission system
♦Simple button operation
Solar Charge 20Ah,Pwm Solar Charge Controller,Restar Solar Controller,Solar Charge 10Ah Controller
Resun Solar Energy Co., Ltd. , https://www.resunsolargroup.com