PP pipe and fitting is made by material polypropylene, it can be used for both water system and industrial application, PP Pipe Fitting has good mechanical properties, good chemical properties, good heat resistance, good electrical insulation, non-toxic.
Ningbo RMI Plastic Co.,Ltd produce PP pipe fitting, PP-H pipe fitting and PP-GF pipe fittings according to standard DIN 8077/8078, pressure rate PN10, SDR11 and PN6, SDR17.6 size from 20mm to 500mm.
PP pipe and fitting includes: PP coupling, PP elbow, PP tee, PP flange, PP reducer, PP end cap, PP union, it is suitable for water supply, water treatment, chemical industrial, steel factory acid pickling system, chlor alkali industry, pharmaceutical industry, etc.
PP Pipe Fitting PP Pipe Fitting,PPH Pipe,PPH Pipe Fitting Ningbo RMI Plastic Co.,Ltd , https://www.rmiplast.com
1.Specification:
NTA63 sleeve and nylon SAE J844 Tube, this series matching D.O.T FMVSS 571.106 performance requirements.
Funcational requirement of SAE J246
2.Application: Used with copper tube in air brake system
3.Addvantages:Machined from CA360 brass
4.Working pressure:4000P.S.I.
5.Temperature range:-65F+250F(-53ºC+121ºC)
6.Assembly instructions:
A.Cut the tube to desired length and remove burns.
B.Slid nut and then sleeve on tube, the threaded end of the nut should face toward the fitting body.
C.Insert tube into the preassembled fitting, the tube should be bottomd in the fitting.
D.Tighten nut to required torque as indicated on chart.
Tube Size
Â
1/4'';3/8'';1/2''
2
5/8'';3/4''
3
note:the following size is just for you refer , unstandard size is custom-made .
Part No.
Tube Size
Pipe Thread
860-4
1/4''
0.322
860-6
3/8''
0.461
860-8
1/2''
0.594
860-10
5/8''
0.734
860-12
3/4''
0.874
D.O.T Air Brake Fitting For Copper Tube
1.Specification:
NTA63 sleeve and nylon SAE J844 Tube, this series matching D.O.T FMVSS 571.106 performance requirements.
Funcational requirement of SAE J246
2.Application: Used with copper tube in air brake system
3.Addvantages:Machined from CA360 brass
4.Working pressure:4000P.S.I.
5.Temperature range:-65F+250F(-53ºC+121ºC)
6.Assembly instructions:
A.Cut the tube to desired length and remove burns.
B.Slid nut and then sleeve on tube, the threaded end of the nut should face toward the fitting body.
C.Insert tube into the preassembled fitting, the tube should be bottomd in the fitting.
D.Tighten nut to required torque as indicated on chart.
Tube Size
Â
1/4'';3/8'';1/2''
2
5/8'';3/4''
3
note:the following size is just for you refer , unstandard size is custom-made .
Part No.
Tube Size
Pipe Thread
860-4
1/4''
0.322
860-6
3/8''
0.461
860-8
1/2''
0.594
860-10
5/8''
0.734
860-12
3/4''
0.874
860 Sleeve - Air Brake Copper Tube Fitting (pipe thread: 0.322)
Model NO.: 860-4: 1/4′′
Certificate: SAE J246
Pipe Thread: 0.322-0.874
Working Pressure: 4000p.S.I.
Trademark: Wanli
Specification: SAE J246
Origin: Taizhou, Zhejiang, China
HS Code: 7412209000
Model NO.: 860-4: 1/4′′
Certificate: SAE J246
Pipe Thread: 0.322-0.874
Working Pressure: 4000p.S.I.
Trademark: Wanli
Specification: SAE J246
Origin: Taizhou, Zhejiang, China
HS Code: 7412209000
D.O.T Air Brake Fitting For Copper Tube