Fiber Optic Light kits comes in two configurations -single sheathed or unsheathed strands of 0.25mm, 0.50mm, 0.75mm, 1mm, 1.5mm,2mm or 3mm diameter fibre, or as multiple sheathed strands of 0.75mm,1.0mm fibre.
Fiber Optic Light Kits,Fiber Optic Lighting Kits,Optic Fibre Lighting Kits,Fiber Optic Led Lighting Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelights.com
Increase in raw material pressure
The rising prices of raw materials, rising labor costs, and the appreciation pressure of the RMB exchange rate have brought challenges to the development of the diamond tool industry. Our city Zhongzhi Diamond Tools Co., Ltd. actively adjusted, "eyes" inward, increased the sintering press transformer and sintering process transformation, and strive to achieve cost reduction and efficiency, offset the pressure brought by rising costs. "The introduction of cold-press equipment, the elimination of high-energy-consuming equipment, and the innovation of the production process is to reduce the consumption of electric energy." The person in charge of the company said that the company has also invested a large amount of funds and personnel to develop energy-saving equipment, as well as water circulation equipment, as far as possible. Reduce the loss of hydropower resources.
Saving electricity costs
One of the most exciting measures for the company's energy-saving retrofits is to improve the raw materials and internal structure for the main component of heating, which will save about 8% of electricity consumption before the retrofit. “The new type of glass-clad wire is used instead of the enameled wire as the wire for the primary coil, and the cross-sectional area of ​​the wire for the primary coil is increased at the same time.â€
According to reports, at the same time "operational surgery" is also the key control part - the trigger mode of the thyristor, the design uses advanced and safe and reliable phase shift trigger mode. "The average hot-pressing machine has an average power consumption of 60 kilowatts per hour, which is a power-consuming device with a large power consumption." The person in charge said that after the transformation, in the case of the same output power, it can save about before the transformation. 8% of electricity consumption.
The transformation of the sintering process is more "simple", mainly the introduction of imported composite insulation boards with high flexural strength. The reporter learned that the benefits brought by this move are quite obvious: taking the H15 cutter head as an example, each furnace can be loaded with 10 cutter heads and increased to 15 cutter heads, which greatly increases the number of single-die sintering. In addition, before the transformation, the average sintering time of each cutter head takes 40 seconds, the sintering efficiency is not high, the power consumption is large, and the average sintering time of each cutter head can be reduced to 35 seconds after the transformation. Only this modification can save About 12.5% ​​of electricity consumption.
Single strands of fibre give starry points of light and normally require no termination, whilst multi-stranded varieties are normally terminated with a ferrule to allow the attachment of an end fitting.
Zhongzhi Diamond: Using composite materials to save one-eighth of electricity
Using a new mold frame and imported insulation materials to transform the sintering process, a diamond tool company in our city tasted the energy-saving sweetness: the number of primary sintering of H15 cutter head changed from 10 to 15, and the average sintering time of each cutter head decreased from 40 seconds. By 35 seconds, it saved about one-eighth of the power consumption.