2 Pillow Block Bearing Sucfc204-212,Pillow Block Bearing Seat Sucfc204-212,Pillow Block Bearing Sucfc204-212 Sizes Jiangsu Dingtian Stainless Steel Products Co., Ltd. , https://www.dingtiancasting.com
I. Overview of the Russian International Machine Tool Show
The Russian International Machine Tool Show is mainly organized by the Moscow International Exhibition Center and co-sponsored by the Russian Machine Tool Manufacturers Association. It is the largest and highest level machine tool industry exhibition in Russia. The exhibition was held in 1984 and was held every two years. Since 2009, it has been held annually at the Moscow International Exhibition Center. This exhibition is the 15th. According to reports, the net exhibition area of ​​this exhibition is about 40,000 square meters, and the total number of visitors is basically the same as that of the previous session, about 50,000. The exhibition covers a wide range of exhibits, from bench drills, general trucks, small presses to CNC lathes, machining centers, turn-milling machine tools, flexible units, and CNC systems, functional components, tools, gauges, etc., covering almost all Machine tool product category.
Second, a typical exhibit
Metal cutting machine
DMG MORI Company: The company has rich exhibits and large spans. It is a typical representative of machining centers, turning centers and milling and turning machine tools. Exhibits include DMU 65 FD turning and milling machining center, DMU 80 P DuoBLOK five-axis machining center, NHX 4000 horizontal exchange table machining center, CTX 310 ecoline and CTX 510 ecoline two-axis turning center, DMC 1035 V ecoline high precision Three-axis vertical machining center, DMU 50 ecoline five-axis universal machining center, MILLTAP 700 three-axis compact vertical machining center, NLX2500/700 two-axis horizontal turning center with back spindle, CTX alpha 500 with Y-axis turning center , CTX beta 2000 TC five-axis composite machining center, ULTRASONIC 30 LINEAR five-axis linkage ultrasonic machining center, SPRINT 20/8 turning center with linear motor and row cutter, NTX 1000 milling and machining complex with back spindle, DMC 650 A total of 17 sets of V three-axis vertical machining centers.
MAZAK: The company has a small number of exhibits, but it includes several representative products, and these exhibits fully demonstrate the smart technology. The gold cutting machine exhibits include the VARIAXIS i-600 vertical five-axis machining center, the INTEGREX i-400S and the INTEGREX i-200S milling and turning machining center with B/C and back spindles, and the SMART 430A three-axis vertical machining center. QUICK TURN SMART 100 MS two-axis horizontal turning center, INTEGREX I-630v milling and turning machining center with B/C fork double swing angle spindle head.
OKUMA: The company exhibited MOLTUS U4000 milling and turning machining center with B-axis and second spindle, V60R CNC inverted car, MU-500VA-L vertical turning and milling machining center, M460R-V spindle speed 12000r/ Min vertical machining center, LB 4000 EXII two-axis horizontal turning center. Through these exhibits, OKUMA demonstrated its smart technologies such as “hot affinityâ€, “anti-collisionâ€, “processing navigationâ€, “five-axis harmony function†and the style of OSP CNC system.
HANDTMANN: The company exhibited the HBZ® Trunnion 80 five-axis horizontal machining center. The machine bed structure is designed by finite element, three-point support, the worktable is available in three sizes: Ø800 / Ø1200 / Ø1600 mm, fast-moving speed 45 m / min, maximum spindle speed 30,000 r / min, main motor maximum power 125 kW The maximum torque is 1010 Nm, the turntable swing angle is -30°/+120°, and the numerical control system is optional for SIEMENS 840D SL or Heidenhain TNC640. It is suitable for five-face economic processing of aluminum, steel and titanium alloy parts.
SPINNER: The company exhibited the TD42-triplex fast multi-function synchronous turning center, the U620 vertical five-axis machining center and a turning center machining unit integrated with the articulated robot. Among them, the TD42-triplex fast multi-function synchronous turning center adopts the vertical high-rigidity whole cast iron bed to achieve free and free throwing. It has synchronous technology and built-in water-based cooling. The maximum spindle speed is 7000r/min.
CHIRON: The company exhibited the VDZ 220 inverted turning center, the MIIL 2000 five-axis machining center with B/C axis tilting table, and the vertical machining center of the FZ150 basket changing method.
HERMLE: The company exhibited the C32 vertical five-axis tilting table machining center and the C42U five-axis vertical machining center.
SCHAUBLIN: The company exhibited the 202TG precision car grinding compound machine. The machine adopts a cast iron bed, equipped with a W25 headstock and two slides, which can be respectively installed with a turret, a grinding wheel or a row of knives, so that it can be easily combined into a CNC lathe, a lathe composite machine and a grinding machine. The machine has high rigidity and high precision. The spindle runout accuracy is less than 0.3μm, and the material with hardness of 65HRC can be hardened.
WILLEMIN MACODEL: The company exhibited the 308S and 408S2 five-axis linkage machining center and the 508MT turning and milling composite machining center. Among them, 508MT turning-milling combined machining center, CNC back-end processing device with U-axis, and 3-station turret can be equipped with sub-spindle + vise + tailstock. This machine can realize complete automatic processing from blank to finished product.
HAAS: The company exhibited the ST-20SSY turning center with Y-axis, the ST30 horizontal turning center, the vertical machining center with VF 3YT with bucket-type tool magazine, and the VMC750 five-axis tilting table vertical machining center.
2. Metal forming machine
At this exhibition, the number of metal forming machine tools was relatively large, and the variety was relatively complete. There were more than 20 molding machine exhibits in Hall 2 alone. Metal forming machines such as stamping, bending, water cutting, laser cutting, plasma cutting, etc. are on display.
Trumpf: Germany Trumpf exhibited the TruLaser 3030 laser cutting machine, the TruBend 7036 press brake, and the TruPunch 5000 turret.
TruLaser 3030 laser cutting machine, X, Y, Z three-axis stroke 3000mm, 1500mm, 115mm, maximum workpiece weight 900kg, maximum linkage speed 140m / min, positioning accuracy 0.05mm, repeat positioning accuracy 0.03mm, the maximum thickness of sheet can be processed 20mm ( Carbon steel), 12mm (stainless steel), 8mm (aluminum). TruBend 7036 bending machine, pressure 360kN, bending length 1020mm, can be used for installation height 295mm, unloading 150mm, maximum speed 220mm / s, maximum working speed 10 ~ 25mm / s. The TruPunch 5000 turret is said to be the world's largest and fastest stamping machine, with its outstanding features as a scalable automation system component solution. The working area is 2500 mm x 1250 mm, the maximum machinable sheet thickness is 8 mm, the maximum punching pressure is 220 kN, the punching speed is 1400 strokes/min, and the maximum stamping speed is 2800 strokes/min.
Swiss Baichao: Baichao exhibited the fiber laser cutting machine BySprint Fiber 3015 and the bending machine Xpert 100. Fiber laser cutting machine BySprint Fiber 3015, can process sheet size 3000mm x 1500mm, XY axis linkage maximum positioning speed 140m / s, maximum axial acceleration 12 m / s2, according to the configuration of different power lasers, can quickly cut thin and high quality Medium thickness sheet. Xpert 100 bending machine, pressure tonnage 100 tons, bending length 2050mm, opening height 500mm, standard stroke 215mm, maximum fast traverse speed 250mm/s, maximum working speed 10-25mm/s, positioning accuracy 0.004mm, equipped with tools Overload protection, side frame compensation system, automatic dynamic pressure control, sheet thickness measurement system, laser angle measurement system.
Sawanini, Italy: Salvagnini exhibited the L5 fiber laser cutting machine, the lean multilateral bending center P1, E3-40/200 bending machine. The L5 fiber laser cutting machine condenses the company's advantages in fiber laser cutting technology for many years, with the advantages of high speed, accuracy, stability and energy saving. The Lean Multilateral Bending Center P1 accumulates the company's many experiences in the history of metal bending, with innovative technology and versatile molds achieving maximum bending efficiency. The machine can process a maximum sheet length of 1575mm, a maximum width of 1000mm, and a maximum rotatable diagonal of 1600mm. E3-40/200 bending machine with a maximum pressure of 40 tons, the main features are high speed, high efficiency, low energy consumption and easy maintenance.
Prima, Italy: Prima exhibited the laser cutting machine Platino and the bending machine FBe. The laser cutting machine Platino adopts a humanized compact structure design, which has a small footprint and good accessibility, and can be easily completed by loading and unloading and maintenance work. The Platino 1530 exhibited an X-axis stroke of 3048 mm, a Y-axis stroke of 1524 mm, a Z-axis stroke of 150 mm, a three-axis moving speed of 100 m/min, and a maximum cuttable sheet thickness of 0.5 to 25 mm. The FBe bending machine has a maximum bending length of 2250mm, a minimum bending length of 350mm, a minimum bending width of 140 mm and a bending force of 32t.
Japan's Tiantian Company: Tiantian Company exhibited laser cutting machine tool LCG-3015 and turret AE-2510NT. LCG-3015 laser cutting machine, the maximum processing range is 3070mm × 1550mm × 100mm, X, Y axis maximum moving speed 120m / min, Z axis maximum moving speed 80m / min, configuration rated power 3.5kW AF 3500i-C laser, the largest The thickness of the processed sheet is 20mm (carbon steel), 10mm (stainless steel), and 8mm (aluminum). AE-2510NT compact AC servo drive turret punching machine, punching pressure 200kN, maximum processing range 2500mm × 1270mm, the maximum thickness of the plate can be processed 3.2mm, processing accuracy 0.1mm, 51 stations, of which 4 stations can be rotated.
Japan's Mitsubishi Corporation: Mitsubishi Corporation exhibited laser cutting machine ML3015 ex, the largest workpiece size 3000mm × 1525mm, X, Y, Z axis stroke are 3100mm, 1565mm, 150mm, X, Y axis rapid feed speed 100m / min.
Water Jet Sweden AB, Sweden: The NCX 30 water-cutting machine exhibited by the company for 2D flat cutting. The table has a width of 1-2m and a length of 1-4m.
Techni Waterjet, Australia: The company's water-cutting machine Tj 3000-3X, workbench size 1550mm × 3125mm, processing area size 1525mm × 3050mm, motion accuracy ± 0.025mm, repeatability ± 0.015mm.
3. Robot and 3D printing
(1) Robot
There were more than 30 robotic products on display at the exhibition. The world's four major robot giants participated in the exhibition, but the area was not large. ABB of Switzerland showed two welding robots. FANUC of Japan showed its sorting robot and α-D14MiA drilling center and Robot M-20iA/35M integrated application. Yaskawa Electric of Japan showed the handling robot, and KUKA of Germany showed the robot processing. . In addition, Gudel in Switzerland and Cloos in Germany have exhibited robot products.
(2) 3D printing
Russia's Solver Engineering exhibited a 3D printer Dimension Elite from Stratasys. The printer is suitable for ABS plus plastic construction of 203mm × 203mm × 305mm model, the best accuracy of 0.178mm.
Third, the Russian machine tool industry and market impression
According to the Russian Machine Tool Manufacturers Association, the association has 170 member companies, of which host companies account for about one-third, all private. The federal government attaches great importance to the machine tool industry, regards it as a basic industry for industrial modernization and a key industry to ensure national security, and protects and supports the domestic machine tool industry in industrial policies and bidding systems.
In order to promote the development of the machine tool industry, the state established the Russian Machine Tool Industry Group Corporation. At the exhibition, several Russian machine tool companies participated in the collective exhibition of this group company. Among them, CTAHKOCTPOEHNE company is said to be a very powerful Russian machine tool enterprise. The company has about 1,000 employees, and only five-axis machines sell more than 100 units each year in the Russian market.
The size of the Russian automotive industry is very small, so the main markets for Russian machine tools are in the aviation, shipbuilding and military industries. These areas of Russia have a high level of technology in the world, so the demand for machine tools is also higher. On the other hand, due to the lagging development of the Russian machine tool industry, the dependence on imported machine tools is relatively high. From the exhibition, the attitude of the world famous machine tool manufacturers to the Russian machine tool market is positive and prudent.
Fourth, the participation of Chinese machine tool enterprises
A total of 74 Chinese companies participated in the exhibition. Except for a few companies including Dalian Machine Tool and Zhuzhou Diamond, most of them participated in the exhibition.
Dalian Machine Tool Group is adjacent to KAMU, a Russian agent, and has an exhibition area of ​​160 square meters. The group exhibited the DL20MPT horizontal slant bed turning center, Ø360×1000mm flat bed horizontal lathe, VDF-1200, VDL-1000, VDL-600A three-axis vertical machining center. According to reports, these exhibits are more marketable in the Russian machine tool market.
V. Inspection and perception
1. Through inspection, we have a clear understanding of the Russian machine tool industry and market conditions. The Russian machine tool market is dominated by imported products, with a high level of demand and a relatively large market potential. Keep a close eye on this market.
2. We have seen that the overall image of China's machine tool enterprises participating in the exhibition is not ideal, far from representing the level of China's machine tool industry. The main problem is that there are few key enterprises. The Russian Machine Tool Manufacturers Association and some Chinese exhibitors hope that the China Machine Tool Industry Association will organize exhibitions to enhance the level of participation.
3. Dalian Machine Tool, Zhuzhou Diamond and other enterprises exhibited leading products. They have achieved good business results through long-term cultivation in Russia. Their approach deserves in-depth study and reference by the industry.
Russia International Machine Tool Exhibition inspection report (all)
Abstract On June 16-20, 2014, the Russian International Machine Tool Show (Metalloobrabotka2014) was held in Moscow. The delegation of the China Machine Tool Industry Association, headed by Wang Liming Executive Vice Chairman, was a group of 6 people.
On June 16-20, 2014, the International Machine Tool Show (Metalloobrabotka2014) was held in Moscow. The delegation of the China Machine Tool Industry Association, headed by Wang Liming's executive vice president, visited the exhibition.