Because rattan furniture is lighter and easier to handle, it is often used to make outdoor furniture. For the outdoor furniture made of this natural material, the maintenance is particularly important. It is understood that when buying outdoor furniture, we must first pay attention to whether the surface is treated with anti-corrosion treatment, because the temperature in the outdoor is relatively easy to move because the weight of the rattan furniture is light, so it is often used to make outdoor furniture. For the outdoor furniture made of this natural material, the maintenance is particularly important. It is understood that when purchasing outdoor furniture, first of all, it is necessary to pay attention to whether the surface has been treated with anti-corrosion treatment, because the temperature and humidity in the outdoor are relatively changed relatively, so the anti-corrosion treatment or painting treatment on the surface of the furniture can enhance the moisture-proof ability. In addition, in addition to rattan furniture, the same method can be used to enhance the moisture resistance of wooden outdoor furniture. After purchasing such furniture, consumers can also apply a layer of transparent paint or anti-corrosive paint, and then every two or three. It can be reapplied once a month to extend the useful life. For outdoor furniture, it must be exposed to the natural environment to withstand the wind and the sun, this reason, easy to care has become one of the prerequisites for the purchase of outdoor furniture, and rattan furniture because of the rattan It is made, so the meticulousness of its preparation determines the convenience of its cleaning. Therefore, consumers should be reminded to check whether the manufacturing process of rattan furniture is meticulous and whether the arrangement of rattan is flat. However, if placed outdoors for a long time, these furniture will appear more or less deformed and faded. Therefore, when selecting rattan outdoor furniture, it is best to decide on the specific use occasion. Http://ptfurnture2.1688.com/, the five major "price" slightly! Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com