Product Features
1. Good physical and mechanic performance.
2. High tearing resistance, strong deformation adptability.
Product Application
Why Choose Us?
Packaging & Shipping
FAQ
Q : Are you a factory or trading company? Geotextile Fabric,Hdpe Geomembranes,Pp Pet Geotextile,Geosynthetic Clay Liner Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com
3. Corrosion resistance, aging resistance.
4. Good adaptability to high and low temperature, non-toxicity, long service life.
5. Good waterproof, drainage, anti-seepage and damp proof effects.
6. Complete width and thickness specifications, low cost and easy installation.
Construction Method
2. Tow adjacent longitudinal joints should not be in a horizontal line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or clay levelingbase, and then laid the geomembrane. The geomembrane should not be stretched too tight, and the part of the soil bured at both ends is corrugated. A transitional layer of about 10cm is laid on the geomembrane with sand or clay.
Company Information
Customer Feedback
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001 certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Optical network cabinet all aspects of operation and installation requirements
Optical network cabinet all aspects of operation and installation requirements
1. The slope shall be laid in order from top to bottom. Don't pull it too tight.
Fiber network cabinet installation requirements;
1. The fiber network cabinet can be fed into or under the cable and fully fronted, which is easy to use;
2, Ruijie Communication professional design: modular, large capacity (maximum wiring capacity of 576 core), high density, easy operation; enough fiber cable introduction space and fixed position (maximum number of imported fiber cable 16), to meet more Requirements for the introduction of optical cables with a small number of cores and small cores; 720-core fiber network cabinets--RJ432-core MODF unit total rack
3. The adapter is installed at an angle of 30° to avoid direct light entering into the eye and ensure the bend radius of the optical fiber. The unique design of fiber and disk storage structure not only satisfies the requirements for the radius of fiberized fibers and the requirements of fiber storage, but also avoids the crossover of fiber jumps. Complete grounding device, safe and reliable; 720-core fiber optic network cabinet - RJ432 MODF unit total rack
4. The fiber routing identifier is clear and complete, which facilitates maintenance and management.
Fiber-optic network cabinets are often placed in the network center computer room or computer classroom. It is a very tall fully enclosed metal cabinet with doors, and a variety of equipment is installed inside.
1) Optical fiber distribution frame The optical fiber distribution frame is a 19-inch wide metal box with square holes for the placement and protection of optical fibers that have been stripped of the outer shell and exposed. After the fiber outside the network center enters the fiber network cabinet, it is not directly connected to the switch, but is connected to the fiber distribution frame, and then the fiber jumper is connected to the fiber switch port of the network switch, as shown in FIG. 2 . Because the fiber is only a bundle of glass fiber, it is very fragile. If it is directly connected to the switch, it can work normally, but it cannot be jumped freely. Otherwise, it is easy to break the fiber.
2) Network Switch The network switch is a network device for data exchange. Optical fibers and network cables from all sides are connected to their ports. The switch, especially the switch in the network center, is the "lifeblood" of the network. Its reliability and security are very important. Therefore, the switch in the network center must be installed in a closed and ventilated optical network cabinet to provide the switch with safe and reliable physics. surroundings.
HDPE Geomembrane is produced according to the GRI GM13 standard.
It`s made of high quality polyethylene resin with proportional carbon black antioxidant, anti-aging and UV- resistance materials which exhibit impermeable and ultraviolet resistance properties. Compared with traditional concrete and compacted clay, smooth geomembranes have proven to be more cost effective, safe and fast deployment. They are widely used for solid waste landfills, waste containment, aquaculture and water treatment system, etc.
Product name
HDPE geomembrane fish farm shrimp pond dam landfill mine tailing liner
Usage
Waterproof and seepage control project
Color
Black/white/blue/double color
Material
HDPE/LDPE/LLDPE/EVA
Thickness
0.1mm-3.0m 1m-8m in roll width, the length as client's request
Service valid term
More than 10 years!
Payment term
L/C D/A D/P T/T Western Union Money Gram
Packing detail
Packing in woven bags. Keep it away from fire.
Property
Good flexible ,UV treated,Excellent environmental stress cracking resistance property,Low temperature resistance, corrosion resistance, aging resistance.
Specific Use
Municioal environmental project, water conservancy projects,Landfill cap, mining heap leach pads, pond liner, canal linings, tank, linings, raw water treatment reservoirs, retention ponds,Waste water treatment lagoon, secondary containment.
Aquaculture Industry
For example, industrialized aquaculture ponds, fish ponds, shrimp pons lining, sea cucumber circle protection, etc.
Environmental Protection
Water Conservancy
Municipal Engineering
For example, tunnel, subway, underground works of buildings and roof cisterns, impervious roof garden, lining of sewage pipes, etc.