There are many things that need attention in home decoration, and the delivery of a home inspection room is no exception. Usually, it is a very happy thing for the owner to hand in the house. However, not all of the home delivery can be smoothly carried out. The following will talk about the new house inspection room process analysis and how to measure the inspection, hoping to help everyone. First, the new house inspection room process analysis 1. Notice: Usually within one month after the notice of receipt of the house is sent, the owners have to go through the formalities; according to the relevant rules, if the owner does not go to the designated address within the agreed time to process the relevant procedures, it is usually regarded as the developer Practice the room to the buyer. 2. Certificate: To check the two books issued by the developer, this is an indispensable step when collecting your house. Specifically, the “Quality Certificate of Residenceâ€, “Using Evidence of Residence Application†and “Form for Completion of Inspection and Completionâ€. The most inquiries are mainly on the “Completion of Inspection Forms for Completion.†It is not enough to see only whether the developer has this form. It is also necessary to carefully investigate whether all sub-items are filed, such as fire-fighting facilities. If there is no doubt, you can proceed to the next step. If you have any questions, it is recommended that you do not accept the house. 3, look at the house: Many developers always ask the owners to pay in advance or pay the full property management fees, etc., and then be able to handle the check-in process, collect the house keys and related information. It should be noted that whether it is based on the rules of the law and the contract of some purchase contracts, the payment of public repair funds, deed tax, etc. cannot be used as a condition for the developer to hand over the house. Second, the new house inspection room process analysis - inspection room how to measure: 1. Flashlight: A flashlight illuminates the bottom of the wall. If it is illuminated upwards, a dark shadow indicates that there is a problem with the wall. At the same time, it is also possible to use Flashlights and vents to check if there is any construction waste. 2, Shantou: used to beat the wall, if the issue of "empty" sound, indicating that the location of cement mortar is not smear or even the amount of symmetry; if you hear the boring knock, then there is no problem with quality. 3. Lighters: Generally, there will be holes left in advance on the exhaust passage between the kitchen and the bathroom. By using a lighter, it is possible to check whether the exhaust passage is normal. 4, tape measure: measuring the roof beam, doors and windows, bathroom height and house area. 5, electric pen: check the socket, through the electric pen or plug into the reserved power socket in advance to see if the power. 6, broom: used to clean the ground and wall cracks in the dust and dust, so you can see the cracks and potholes, and even found that exposed steel bars. In the well-decorated house, after cleaning the earth's dust, you can see if there are any doubts about floor damage or cracks. Summary: The above is Xiaobian introduced on the new house inspection room process analysis and inspection of how to measure the knowledge, there is a need to make friends can refer to oh. The inspection process must be carefully checked so as not to overlook important steps. For more related knowledge, please continue to pay attention to this site. House inspection process Other Headlamp,Camping Headlamp,Flexible Headlamp,Cob Rechargeable Headlamp NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.intellingentlighting.com
