As shown in the figure below, the two ends of the connecting rod have been semi-finished, and the large and small head holes have pre-cast holes. Figure 1 shows the A process, the large and small head holes and the center hole are drilled; Figure 2 shows the B process, the side of the milling process and the bolt face; Figure 3 shows the C process, which is fine and small. For more information, please click: Application of Longmen Machining Center in Automobile Connecting Rod Manufacturing
Application: Very high pressure applications used for petroleum based hydraulic fluids, hose range suitable to carry hydraulic fluids such as glycol, mineral oils, fuels, lubricants, emulation, hydrocarbons ect.
Characteristics: The layer has good property of oil resisting, anti-aging small deformation under pressure, having negative pressure resistance, high service life.
Hebei Baoshi supplies a range of different hydraulic hose types, including:
High Pressure Rubber Hose Series
Medium Pressure Rubber Hose Series
Low Pressure Rubber Hose Series
Specifications: High Pressure Rubber Hose Series RTP High Pressure Pipe,High Pressure Rubber Hose,High Pressure Hose,High Pressure Hydraulic Hose HEBEI BAOSHI SPECIAL FLEXIBLE RUBBER CHEMICAL INDUSTRY CO., LTD. , http://www.hbbaoshihose.com
The connecting rod is subjected to a drastically changing dynamic load during operation, so the dimensional accuracy, shape accuracy and positional accuracy of the connecting rod are very high, and the rigidity of the connecting rod is relatively poor, which is prone to deformation, which gives the processing of the connecting rod. Brought a lot of difficulties. The center plane of the big end and the small end of the connecting rod is also relatively high in symmetry with respect to the center plane of the connecting rod shaft. In order to ensure the processing accuracy of its symmetry, some connecting rods are designed as process bosses and center holes as an auxiliary reference for processing. The connecting rod itself has low rigidity and is easy to be deformed. Therefore, when the process is arranged, the rough and finishing processes of the main faces are separated, and the effects of machining allowance, cutting force and internal stress are gradually reduced. The deformation generated in the roughing is corrected in the semi-finishing, and the deformation generated in the semi-finishing is corrected in the finishing, and finally the precision of the part is achieved.
There are five main parameters reflecting the accuracy of the connecting rod: the symmetry of the center end of the connecting rod and the center plane of the small end with respect to the center plane of the connecting rod shaft, the large and small head hole center distance dimension accuracy, and the connecting rod large and small Parallelism of the head hole, large and small head hole size accuracy, shape accuracy, verticality of the connecting rod bolt hole and the joint surface.
Taking the connecting rod of an engine as an example, the application of the machining center and the conventional equipment on the processing link will be described for a part of the processing of the connecting rod. 
Figure 1 Rough large, small head hole and drill center hole 
Figure 2 Milling process side and bolt face 
Figure 3 fine large and small head holes
1. ISO 9001/ API Q1 / ISO14001 / OHSAS 18001 Certificate
2. Large stocks Timely delivery
3. Professional
4. Good after-sale servic
Metal processing online lecture hall: difficult processing of automobile connecting rod
The connecting rod is mainly composed of a big head, a small head and a shaft. The big head is a split structure, half is the connecting rod cover, and the other half is connected with the shaft body. The connecting rod is bolted, the big hole and the bearing bush are matched with the crankshaft connecting rod journal. The small head hole and the bushing pass the Piston pin and The piston is coupled to transmit the gas expansion pressure acting on the piston to the crank, and is driven by the crank to drive the piston to compress the gas in the cylinder.