When disassembling the gear oil pump, each part should be preserved. Special attention should be paid to the explosion-proof surface of the explosion-proof parts. The insulation should not be damaged, including the insulating gasket and casing. If it is damaged, the new identical parts must be replaced. Use substitute materials that are lower than the performance of raw materials or parts that do not conform to the original specifications. All parts should be assembled in the original position during assembly, and should not be missed. It is understood that the maintenance of the gear oil pump should pay attention to 5 points: 1. Save each part and exchange the same parts. When disassembling the gear oil pump, each part should be preserved. Pay special attention to the explosion-proof surface of the explosion-proof parts, which can not damage the wool, including the insulating gasket and casing. For damage, the same new parts must be replaced. Substitute materials that are lower than the performance of the raw materials or parts that do not conform to the original specifications shall not be used. All parts shall be assembled in the original position during assembly and shall not be missed. 2, often fatliquoring, electric drum pump for high-speed operation, grease is easy to volatilize, so the lubrication at the bearing must be kept clean, and pay attention to add. 3, pay attention to save the electric pump should be placed in a dry, clean and non-corrosive atmosphere. 4, gear oil pump often check maintenance, electric oil drum pump should be checked frequently, maintenance, must check the power cord: internal wiring, plug, switch is good, insulation resistance is normal, brush tail seat is loose, commutator and brush Good contact, whether the armature windings the stator windings are suitable for interrupting the road, whether the bearings and rotating parts are damaged, etc. 5, gear oil pump pay attention to insulation resistance, long-term use of electric pumping pump used or used in humid environment, the insulation resistance of the winding must be measured with a 500 volt megger before use. If the insulation resistance between the winding and the motor casing is less than 7 megohms, the winding must be dried. Concerned about surprises Label: Maintenance of gear oil pump Previous: High-speed compound chamfering machine function introduction Next: Rubber cable definition and product description High-power gear motors provide unparalleled speed and torque performance, durability and high-performance energy-saving operation. Their excellent performance has been widely used in various application fields. Their accuracy and torque can well meet customer needs. It is an entry-level equipment that provides simple and effective transmission solutions specifically for your application. Gear reducer motor, micro motor, mini motor Changzhou Yuanwang Fluid Technology Co., Ltd. , https://www.ywfluid.com