The kitchen sink is an important part of the kitchen and can make your kitchen more tidy and clean. The kitchen sink can be divided into stainless steel, ceramics, artificial stone, etc. according to the material. According to the style, it can be divided into single basin, double basin, and double basin of opposite sex. Then, we will introduce the kitchen sink installation process and the kitchen sink material. Kitchen sink installation process 1, the location of the sink should be reserved When the sink is installed, the position on the countertop should be consistent with the volume of the sink. The installation of the sink should be firm and can not be shaken. Pay attention to the tightness of the connection during the installation. 2, first install the leader and inlet pipe When installing the sink, first install the faucet and the inlet pipe. Connect one end of the inlet pipe to the inlet switch. 3, sink into the table After the sink is put into the countertop, a matching hanging piece is to be installed between the tank body and the countertop, and the joint is sealed as much as possible. 4, overflow hole, filter basket seal The degree of sealing of the overflow hole and the filter basket will affect the use of the sink, so after the installation is complete, the overflow hole and the filter basket must be checked for sealing. 5, install supporting hanging pieces The supporting hanging pieces should be installed between the tank body and the countertop. When installation, it is necessary to avoid the small gaps causing the tank body to shake, which can prevent the subsequent leakage of water. 6, drainage test, sealing After the sink is installed, test the water. If there is water seepage during drainage, rework it immediately. If there is no problem with the drainage, the water tank can be sealed. When the edge is sealed, the gap between the water tank and the table must be even and no water seepage can occur. What kind of kitchen sink material is good 1, ceramic sink Ceramic sinks are more common and prices are cheaper, but they lack features and styles are too common. 2, pure acrylic sink The pure acrylic sink is rich in color, and can be used to match colors according to the needs of consumers to create a coordinated and unified effect. 3, stainless steel sink The stainless steel sink is the most widely used, and the sink in this material is wear-resistant, high-temperature resistant, non-corrosive, and does not produce odors, but the current market price of stainless steel sinks is relatively large. Editor's summary: The kitchen sink installation process and the kitchen sink material which is good to introduce here, I hope to be helpful to everyone, want to know more relevant knowledge can focus on this site information. Sink installation kitchen sink installation Tote Bags,Canvas Tote Bag,Cotton Canvas Tote Bag,Gift Monogram Tote Bag Dongguan C.Y. RedApple Industrial Limited , https://www.redapplebags.com
