Hydraulic cutting machine operation instructions-Dongguan Heavy Cutting Machine Co., Ltd. Hydraulic cutting machine operation instructions-Dongguan Heavy Cutting Machine Co., Ltd.
Wire brushes are often used for cleaning and derusting various materials, such as surface treatment of steel and aluminum, or cleaning and derusting of industrial pipelines and mechanical screw holes.
Wire brushes are classified into wood handle wire brushes, flat wire brushes, spring wire brushes, wire brush rollers, etc
Today, with the rapid development of the industry, one of the important machinery necessary for the major industrial enterprises of hydraulic cutting machines, it is very necessary for the enterprise to be aware of the operation of the machine. Good operating habits and expertise not only reduce the threat of the machine to the operator, but also effectively extend the life of the machine. Therefore, it is necessary to understand the operation instructions of the hydraulic cutting machine as described below.
First, the instructions before starting the boot:
1. Check whether the external and internal parts are intact or fall off and damaged, and whether the emergency braking system, infrared device, etc. are normal;
2. Remove obstacles that interfere with the operation of the machine;
3. Check if there is any oil leakage at the bottom.
Second, the startup steps are described:
1, plug in the power supply, must be 380V voltage, otherwise it can not be driven;
2. Press the motor start switch;
3, the heat machine 5-10 minutes, the winter can add more than half of the time, the purpose is to make the machine performance better, extend the life of the machine.
Third, the machine operation instructions:
1. Is the operation of the heat engine stage stable? Is there noise?
2. Whether the meter is normal, always pay attention;
3. Listen carefully to the operation of the cylinder and spindle parts. Is the sound normal?
4. Keep the outside of the hydraulic cutting machine and the surrounding area clean. It is strictly forbidden to place any items outside the material in the cutting area, such as mobile phones, tools, and clothing.
Fourth, the emergency situation description:
1. Press the emergency brake device when abnormal operation or noise and vibration occur;
2. When the instrument is not working properly, press the emergency brake device;
3. Press the emergency brake when an emergency occurs around.
Five, daily maintenance instructions:
1. The new machine will change the hydraulic oil for the first time, and then replace it every 2 years;
2. Pay attention to cleaning the electrical parts;
3. Fixed lubrication of each shaft (except with automatic lubrication system).
Solemnly remind: It is absolutely forbidden to extend the hands or the human body into the lower part of the cutting machine plate, and strictly follow the instructions of the manufacturer of the hydraulic cutting machine.
In summary, the operation instructions of the hydraulic cutting machine are not harmful to the company itself. Therefore, it is very necessary to correctly understand the machine operation instructions, improve their own knowledge, improve the production efficiency and quality of industrial manufacturers, and better guarantee the service life of the machine.
Source of information: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Wire Brush,Small Wire Brush,Metal Brush,Wire Wheel Brush
JIANGSU RARHON TOOLS CO.,LTD , https://www.rarhontools.com