The HVLP Electric Paint Spray Gun make painting and varnishing much easier, with 30000 rpm speed, at max 500ml/min water consumption speed.
The material flow can be controlled by the switch.
Paint with the HVLP Paint Sprayer, easy to paint the hard-to-reach areas and no need to clean the rollers and brushes.
Working close to the ground and painting overhead are easy for the Electric Paint Spray Gun.
You can spray on paint, varnish and glaze quickly, evenly and cleanly using as little material as possible – and it's also kind to your back, neck and shoulders.
Electric Hvlp Paint Spray Gun,Ginour Paint Sprayer,Electric Turbine Paint Sprayer,Hvlp Electric Sprayer Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com
How to maintain and maintain stainless steel pumps?
Maintenance and repair >> Stainless steel pump method: (1) Check the stainless steel pumps and pipe joints with loose phenomenon. Hand rotating stainless steel pumps, stainless steel pumps to see whether the flexibility. (2) to Bearings body bearing lubrication oil, observe the oil level should be at the oil center line, the lubricating oil should be promptly replaced or supplemented. (3) Unscrew the stainless steel pump body of the diversion plug, water diversion (or pulp). (6) start the motor, when the stainless steel water pump is operating normally, open the outlet pressure gauge and the inlet vacuum pump (6) start the motor, open the outlet pressure gauge and the inlet vacuum pump , As it shows the appropriate pressure, and gradually open the gate valve, while checking the motor load situation. (7) try to control the flow and lift of stainless steel pumps in the range indicated on the sign to ensure that stainless steel pumps operate at the highest efficiency point in order to Get the maximum energy saving effect.