The working principle of a Medium Flow Peristaltic Pumpis like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the Peristaltic Pump hose. Medium Flow Peristaltic Pump,Constant Flow Peristaltic Pump,Intelligent Accuracy Pump,24V Peristaltic Pump Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crperistalticpump.com
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
Heat pump oil pump body bearing matters needing attention and methods
Heat-conducting oil pump bearing body refueling precautions and methods Heat-conducting oil pump must be filled with bearing oil before use, to ensure that the heat-conducting oil pump bearing lubrication after starting. To heat-conducting oil pump bearing body parts should pay attention to several factors. First, filling grease must be high temperature grease. Second, grease must be clean, can not have impurities, so as not to damage the bearings. Third, when filling the grease, the bearing body deflation port should be opened first and then injected from the other port. Fourth, the amount of grease should be injected into the heat-conducting oil pump bearing half the location is appropriate, should not be filled too full, to avoid the oil temperature rise caused by the bearing body oil port leakage. But also for the thermal oil pump gland seal pressure is not good, easy to damage the gland seal. Fifth, regularly drain oil from the heat-conducting oil pump bearing body drain and wash and add new grease.