The following tools are required for curtains: small tooth saws, chisels, woodworking hammers, long drills, tweezers or drills, universal pliers, vise, scissors, large eye needles, screwdrivers, etc. The fixed plug is made of soft logs such as pine. The plug has a length of 60 mm and is square in cross section (22 x 22 mm) with a thin tip at one end. In order to fix the curtain frame, firstly, the position of the hole for the cork stopper in the upper part of the window hole is fixed. The height of the curtain installation depends on the total height of the room. When the height of the room is 2.5-2.7 meters, it is best to set the curtain frame close to the ceiling, so that the window hole will appear larger and the room will appear higher. If necessary, use a chisel to drill or drill a large hole with a diameter of 30 mm and a depth of 60 mm. Use a woodworking hammer to firmly push the cork into the hole so that it is flush with the wall surface. Screw the generous nail into the center of the cork or screw the wide cap screw into the center of the cork with a screwdriver and secure the curtain frame or panel. When installing a straight curtain frame, use a large nail or wide cap screw with a length of 100-150 mm; when installing a flat plate, a fixing piece with a length of 1000-120 mm should be used; when installing a round bar frame Small square nails or wide cap screws should be used. The panel can be hung with a curtain that is fixed or mobile. For mobile curtains, the special lever can be fixed on the board, and the cymbal can move freely on the rod with a certain number of rings. In order to fix the flat curtain frame, two staples are screwed on the back of the back with screws, and the head of the generous nail protruding from the wall is inserted into the arc of the two staples. When hanging curtains, the following metal rings are used: large metal rings for round metal curtains; large metal rings for round plastic curtains; and wooden rings for wooden curtains. The diameter of the free moving ring should be larger than the diameter of the rod, usually not less than 10-15 mm.
Hss Drill Bits For Wood-Screw Extractor Drill Bits
The Screw Remover Set grab damaged fasteners with speed and precision.
High efficiency, high quality, and user-friendly, the Vastar Screw Remover Set is made to make tough jobs easier.
Product name High Carbon Steel Damaged Screw Extractor and Remover Set with Double Blister Card Packing Material High Carbon Steel (HSS 4341 is available) (HSS 6542 is available) Screw Size #1(3-5mm) #2(4-8mm) #3(5-10mm) #4(6-14mm) Flute type
Screw Extractor Drill Bits,Broken Screw Extractor Drill,Damaged Screw Extractor Set,Screw Extractor Drill Bits Set Changzhou Bomitools Co.,Ltd. , https://www.bomitools.com