Aluminium alloy is a type of metal that is widely used in various industries. This alloy is made by combining aluminium with some other metals, such as copper, magnesium, silicon, and zinc, to enhance its properties. The resulting alloy has improved properties than pure aluminum, such as higher strength, corrosion resistance, and good weldability.
One of the main advantages of aluminium alloy is its lightweight. It is about 1/3 the weight of steel, which makes it an ideal material for transportation applications, such as airplanes, cars, and trains. The alloy's high strength also makes it suitable for structural applications, such as in the construction industry.
The corrosion resistance of aluminium alloy is another benefit. Its protective oxide layer prevents rust and other forms of corrosion, making it an ideal material for outdoor applications, such as building facades, roofing, and window frames. The alloy's good thermal conductivity also makes it suitable for heat exchangers and other heat transfer applications.
Aluminum alloy also has a good aesthetic appeal. It can be easily shaped, welded, and fabricated into various shapes and designs. It can also be anodized or painted to provide a decorative finish.
In conclusion, aluminium alloy is a versatile material with many advantages. Its lightweight, strength, corrosion resistance, thermal conductivity, and aesthetic appeal make it an ideal choice for many applications.
7075 Aluminum,6061 Aluminum,5052 Aluminum,6063 Aluminum Lizhi Precision Manufacturing Technology Co.,Ltd , https://www.lzautoindust.com
  Our desiccant masterbatch is designed specifically for removing moisture from recycled PE/PP/PS/EVA/HIPS during processing. Its great advantage is it can effectively absorb moisture while processing, so that the recycled PE/PP/PS/EVA/HIPS scraps and granule could be directly used to make plastic products without pre-drying.And the product quality could be proved to be very good.Â
  Actually,We add high MI PE into our desiccant masterbatch instead of common low MI plastic as carrier to make it perform better,so the dispersion,liquidity and effectiveness are very good and our desiccant masterbatch quality is better!!
Our moisture absorbent master batch compared with the driers on the costs:
Method
Labor cost
Equipment depreciation
Electricity cost
Material cost
Safeguard fee
efficiency
Driers
Need more workers, all the process need to take good care
Need to purchase a new equipment, cause the depreciation fee
cause extra electric cost while drying
The material weight lost while drying because the moisture was evaporated
Much noise
It will extend the working time
Moisture absorber
The process no need to add extra workforce
No need to purchase new equipment
No extra electric cost
The moisture was absorbed by the master batch, which still stays in the material
No noise
Save time and make high efficiency
NOTE:Â
  Normally 2-5% added for film product and 4-6% for sheet/board/pipe product, just mix it with the resin material like the color master batch, but please not dry the mixed material with oven or some other machine, the mixing shall under normal temperature.
  There are two key points that should be specially noticed while processing:
1. premixing:  high temperature mixing before processing is not permitted, so do not heat up the stirring machine or material, and do not let the mixed material stay in the stirring machine for a long time or it will absorb moisture while mixing and block the screen. Simple stirring under normal temperature is ok.
Â
2. storing:Â this master batch should be used within 12-24 hours after the pack has been opened for it absorbs water moisture very well when it was exposed to air.
Package:
  For dessicant MB,we have two kinds of packages,one is 25kg cartons with 5*5kg Vacuum bag;another one is Soft Package,we use 25kg kraft paper bags with 5*5kg double-layer pe bag.(25kg/bag,1FCL=27tons)
  We can also customize desiccant masterbatch according to your requirements,so please don't hesitate to contact me!^_^
Tel/+86-15889980235
Â
Desiccant Masterbatch Manufactured for PE, PP, PS, or EVA Recycled Materials
Trademark: fms
Transport Package: 25kg/Bag, 1FCL=27tons
Specification: small granules
Origin: China
Product Description: