When the market turns, the salesperson will always recommend how good his product is. Experts said that the quality of mid- to high-end products currently on the market is not large, but there are many problems with low-end products. Attracting customers with low prices is cutting corners in craftsmanship. Therefore, consumers must have “mainstay†when buying. It is best to master some methods to identify the merits of the tiles. One is to identify the water absorption rate. High quality tiles are very low in water absorption. The wall tiles with high water absorption rate will cause cracks on the ceramic tile surface and exfoliation of the entire wall after shrinkage and thermal expansion. Identification methods, some tiles indicate that the water absorption rate can be directly compared. If not, tea or water droplets can be placed on the back of the floor tiles. After a few minutes, the degree of penetration of the water droplets is inspected. The lower the water absorption, the lower the water absorption rate and the better the quality. The second is to identify the brick surface. Check whether the brick surface is flat, whether the uneven thickness of the pinhole, and can tap the tile to hear the sound is crisp, that is, the texture of the tile density is high, the hardness is better. And can try to scratch the brick surface with a hard object, if there is a scratch, it means insufficient glaze, the surface of the glaze polished, the brick surface is easy to hide, it is difficult to clean. The third is to identify the color difference. Put a few pieces of ceramic tile together and look closely under the light. The color difference of a good product is small, and the color tone between products is basically the same; while the color difference of poor products is larger, the shades of color between products are different. Tiles Tiles Floor Tiles Tiles Tiles 
Mona Lisa Tiles