Characteristics of Broken Bridge Aluminum Doors and Windows

[China Aluminum Network] The principle of broken bridge type aluminum-plastic composite window is to use plastic profiles (more than 1250 times of heat insulation than aluminum profiles) to separate two layers of indoor and outdoor aluminum alloys and connect them tightly to form a whole. The new heat-insulating aluminum profile uses this type of profile for doors and windows. Its thermal insulation is in the same grade as the plastic (steel) window—GB grade, which completely solves the fatal problem of aluminum alloy that conducts heat quickly and does not meet energy-saving requirements. Problems, at the same time taking some new forms of structural cooperation, completely solved the "aluminum sliding window is not strict" the old hard problem. The product is made of aluminum on both sides, with a plastic profile cavity as a thermal insulation material in the middle. This innovative structural design takes into account the advantages of both plastic and aluminum alloy materials, while meeting a variety of requirements for decorative effects, door and window strength, and endurance performance. The super-bridge aluminum-aluminum plastic profile can realize the three-seal structure of the doors and windows, reasonably separate the water vapor cavity, successfully achieve the equal pressure of air and water, and significantly improve the watertightness and airtightness of doors and windows. The airtightness of this window is better than that of any aluminum or plastic window. It can ensure that there is no dust on the indoor sill and floor in areas with large sandstorms; it can ensure that residents within 50 meters on both sides of the freeway are free from noise, and its performance is close to leveling. window.

The profile section wall thickness of broken aluminum doors and windows strictly follows the national standards. Wall thickness requirements must be above 1.4mm, because the thin wall thickness relates to the assembly technology and the solid security issues that make up the doors and windows. The common color aluminum doors and windows wall thickness requirements are not very strict, generally based on the market and processing window and field benefits, generally about 1.0mm.

Technical requirements for the assembly of color aluminum doors and windows and general color aluminum doors and windows of broken bridges. Features: Broken aluminum doors and windows are cut through a wall thickness of 1.4mm or more than 1.4mm to a 45-degree angle. The corners are assembled with special plug-ins of more than 3mm through doors and windows. equipment. Extrusion positioning, and ordinary doors and windows are using about 1mm ordinary angle aluminum rivets connected together, its solid security is poor, but the cost is low. There is no problem for adults standing on the walk with the assembled color broken aluminum doors and windows. The assembly of equipment and the use of manual on-site assembly are technically very different. Special bridge aluminum profiles and ordinary aluminum profiles cannot be compared.

Broken-bridge color aluminum doors and windows must be customized by the aluminum manufacturer professional production cycle of the surface color processing are professional and technical, the use of a longer period of time, and ordinary color aluminum doors and windows just by any ordinary aluminum, not After specializing in coating one of the colors that oneself wants, the technical treatment is not professional for aluminum manufacturers in place, the coating effect and the service life will not be too good. For too long, there will be fading fade phenomenon, known as cowhide gland, which will determine the broken Bridge color aluminum doors and windows is a long production cycle, while the ordinary color aluminum doors and windows production and production of short features.

The color aluminum doors and windows of broken bridges are not the same as the design of ordinary aluminum windows and doors. The broken bridge design pattern is atmospheric. The lighting is transparent and designed according to different spaces. However, ordinary aluminum doors and windows can only be designed according to the conventional design. The window opening window design is a large design, dedicated broken bridge flat window hardware, and general aluminum is any hardware can be used, beautiful and poor.

Broken window glass must be hollow glass 5mm+9A+5mm double-sided tempering, and ordinary color aluminum are generally single-living glass, so the sound insulation effect of broken bridge is good.

Lawn Lamps

Lawn lamp design mainly exterior and downy lamplight add security for urban green space landscape and beautiful, and generally has the characteristic such as easy installation, adornment sex is strong, can be used for park, garden villas, square, greening, greening of the place such as decorative lighting.