Garden Lamp is a kind of outdoor lighting lamps and lanterns, usually refers to the outdoor road lighting lamps and lanterns below 6 meters.The Garden Lamp is characterized by its diversity, beauty and decoration environment, so it is also called landscape courtyard lamp.Slow lane, narrow lanes and is mainly used in city residential areas, tourism scenic area, outdoor lighting, park, plaza and other public venues can prolong people's outdoor activities, improve the security of the property.
The Garden Lamp has many styles, each style has its own unique name.For example, Water,Moon,Diamonds,Lucky and UFO, these garden lights are not only elegant in name, but also artistic and elegant in appearance.
The Garden Lamp body is aluminium alloy profile is used for manufacturing, high strength, light pole electrostatic powder spraying process, anti graffiti proof, radiation stainless steel links, anti-corrosion ability, patent luminous light pole, the built-in LED light source, disassembling design is reasonable, easy to install and maintain, installation height is 3 to 5 meters.
Technical parameters
Chip
CREE/SAMSUNG/PHLIPS
Initial luminous flux
≥90LM
Color temperature
3800-6000K
Level of protection
IP65
Power factor
0.96
Garden Lamp,Garden Lamp Post,Garden Lamps Solar,Garden Lamp Post Solar Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com
1) According to the GB3836.15 standard, combined with on-site conditions, formulate specific periodic inspection and continuous supervision and maintenance system;
2) Before use, check that the supply voltage is the same as the rated voltage of the luminaire, to avoid damage to the luminaire due to voltage inconsistency;
3) Non-professionals must not disassemble lamps.
4) Lamps must be reliably grounded.
5) When changing the light source or disassembling the lamp, it must be done in a safe place.
6) Keep the surface of the lamp housing and transparent parts clean to ensure good light transmission;
7) Ambient temperature of the luminaire is between -40°C and 45°C. If it exceeds 45°C, forced ventilation is required.
8) Avoid the collision between the lamp housing and the hard object. During use and maintenance, the explosion-proof surface should be protected. There should be no bumps, scratches, or other dirt. If there is any dirt, use a non-metallic scraper to clean it, so as not to damage the explosion-proof surface. .
9) Regularly check the sealing ring for aging so as not to affect the sealing performance.
10) When using the wire to enter the lamp, the sealing ring shall be a three-hole sealing ring, and an explosion-proof accessory with packing and sealing shall be installed at the front stage of the lamp. 
BLD110 Explosion-proof lamp matters needing attention
BLD110 Explosion-proof lamp matters needing attention