One of the most fascinating materials of our time is polycrystalline cubic boron nitride PCBN - the second hardest material after diamond. At CeramTec, PCBN is used as a cutting material from which indexable inserts are manufactured for machining. PCBN (Polycrystalline Cubic Boron Nitride) blanks for cutting tools are composite ultrahard materials sintered by polycrystalline CBN and carbide alloy under ultra-high pressure and high temperature conditions. They combine the hardness, wear resistance, and thermal stability of CBN with the impact resistance and toughness of carbide alloy. PCBN blanks are highly suitable for cutting ferrous and non-ferrous metals with high hardness. PCBN Composites and Inserts Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com
PCBN is produced synthetically and is a "composite material" made of cubic boron nitride and a mostly ceramic binder phase. The ratio of cBN to binder content and the cBN grain size determine the application.
PCBN cutting materials are used in the machining of hard and/or highly abrasive workpiece materials. The high hardness and the extremely high hot hardness (up to temperatures above 1,000°C), the edge stability and inertness towards ferrous materials as well as the basically good chemical resistance give CBN cutting materials a high potential for use in machining. On the cutting material side, a distinction is made between high- and low-cBN cutting material grades.
Anxin Floor Shanghai Manufacturing Quality Assurance
Â