Regardless of the industry sector, safety is our primary concern. This is especially true for areas where there is a greater risk of welding gas cutting, hoisting, etc. We must be vigilant. Today, we will discuss the ban on safe work, so that you can check and check during the production process to avoid accidents. Electric cutting gas welding 1. No special operation operation certificate, no welding, cutting. 2. There are no reliable safety measures in the open air operation, no welding or cutting. 3. Containers filled with inflammable, explosive and hazardous materials, not thoroughly cleaned, not tested for flammable concentration, not welded or cut. 4. Work in the container without 12 volts low-voltage lighting or poor ventilation, no welding, cutting. 5. The equipment is not powered off, not welded or cut. 6. There are flammable and explosive materials in the working area, which are not welded or cut. 7. The nature of the weld is unclear, the spark is not clear, and it is not welded or cut. 8. Equipment safety accessories are incomplete or ineffective, not welded or cut. 9. Boilers and other equipment are not monitored by special personnel, without protective measures, and are not welded or cut. 10. No safety measures have been taken in the fire-fighting area, no fire procedures have been completed, and no welding or cutting has been carried out. 1. There is no blaster's work permit, and it is not possible to work without pre-job safety training. 2. Failure to carry out blasting safety technology or unclear can not work. 3. Undetermined contact signal or poor signal can't work. 4. The blasting equipment cannot be operated without passing the inspection. 5. Do not smoke at the workplace. 6. All personnel who have not been evacuated to a safe place cannot detonate. 7. The security alert is not set and cannot be detonated. 8. The remaining blasting equipment must be transported back to the warehouse and cannot be stored on site. 9. All blastholes have not been inspected after blasting or the dumb guns have not been processed and cannot continue to operate. 10. Other safety measures are not in place and cannot be operated. 1. Do not wear a helmet and cannot enter the site. 2. Children cannot enter the scene. 3. Facilities such as derricks cannot be taken. 4. Do not wear slippers, high heels and hard bottom shoes to work. 5. Templates and perishable materials should not be used as scaffolding. 6. Untrained workers cannot operate machinery. 7. The construction site can't play and play. 8. The lifting equipment cannot be operated without inspection. 9. Wood storage places and fireproof restricted areas cannot be smoked. 10. Various materials on the construction site cannot be mixed. 1. The weight of the object to be hoisted is unclear. 2. The command signal is not clear and does not hang. 3. Bundling and hanging are not strong, which may cause it to hang when sliding. 4. When someone is on the hanging object, it will not hang. 5. The structure or component does not hang when it has defects that affect safe work. 6. Do not hang when there is an unclear embedded object. 7. The work site is dim and cannot be seen when the site, the object being lifted and the command signal are not visible. 8. Do not hang when there is no padding between the corners of the object and the bundled steel rope. 9. Do not hang when lifting heavy objects. 10. Do not hang the contents of the container when it is too full. 1. Do not drive the vehicle after drinking. 2. It is not possible to use the bus privately. After completing the task, it is strictly forbidden to return the vehicle and stop it. 3. Can't overload or speed. 4. You cannot give the vehicle to someone else to drive. 5. Can't get out of trouble with the car. 6. Do not let the car not slow down, and it is strictly forbidden to take the road. 7. Do not wear slippers, vests, or shorts to drive the vehicle. 8. When the weather is not good, you cannot drive or drive the vehicle without prior notice. 9. Can't talk to the rider to avoid distraction. 10. Can not forcibly overtake and change lanes. 1. It is not possible to repair and move electrical equipment, wires and cables with power. 2. Do not remove the pressureless release or overcurrent protection device. 3. It is impossible to get rid of leakage relay, coal electric drill integrated protection device and local fan wind power and gas electric lock device. 4. Do not open fire or open fire. 5. Do not replace the fuse with copper wire, aluminum wire, iron wire, etc. 6. The mining face is powered off, the gas is not checked, and power cannot be sent. 7. A faulty line cannot be forced to transmit power. 8. After the protection device of the electrical equipment fails, no power can be supplied. 9. Explosive equipment and electrical appliances cannot be used. 10. It is not possible to disassemble and knock the miner's lamp downhole. 1. Cannot work without the approval procedure for restricted space operations. 2. No guardian can not work on site. 3. Failure to analyze dangerous and hazardous substances in confined spaces is not possible. 4. The confined space cannot be operated without replacement or purging. 5. The ventilation in the confined space is not smooth and can't work. 6. Do not work if you do not wear the appropriate safety equipment. 7. Obstructions around the entrance and exit passages of the confined space are not cleared and cannot be operated. 8. Do not work without warning signs. 9. Valves and pipelines associated with confined spaces are not isolated and cannot be operated. 10. The work content or work environment has changed and the hazard analysis has not been re-worked. 1. When switching various valves, the body cannot face the valve. 2. Cannot be near the steam leak point. 3. When the water pressure test is introduced into the water, the personnel who manage the air door and the water supply door cannot leave without permission, so as to prevent the water from overflowing and scalding other people. 4. When checking the rotating equipment, the body cannot face the equipment to prevent danger. 5. In the absence of special guardianship, you cannot enter the induced draft fan for inspection. 6. When the coal pipe does not go down, the arm cannot be inserted into the coal pipe for treatment, so as to prevent the coal piece from falling suddenly and hurting the arm. 7. No water can accumulate on the bottom of the boiler. 8. Do not cross work on the same vertical plane. If it is unavoidable, effective protective measures must be taken. 9. The inspector cannot perform boiler operation without authorization to avoid boiler accidents caused by operational errors. 10. When the boiler is subjected to an overpressure test with a working pressure of 1.25 times, no inspection can be carried out while the test pressure is maintained. The pressure should be reduced to the working pressure before the inspection can be carried out. 1. An unlicensed electrician cannot install electrical equipment. 2. No one can play with electrical equipment and switches. 3. Do not use electrical equipment that is damaged by insulation. 4. Do not use electric heating equipment and light bulbs for heating. 5. No one can activate electrical equipment with a warning sign. 6. Do not rinse or wipe electrical equipment with water. 7. Fuse that does not match the capacity cannot be exchanged when the fuse is blown. 8. It is not possible to piling the soil without any formalities in the place where the cable is buried. 9. If someone gets an electric shock, immediately turn off the power and do not touch the electric shocker before leaving the power supply. 10. Do not touch the arrester and lightning rod during thunderstorms. 1. People with high blood pressure, heart disease, anemia, epilepsy, and deep myopia cannot climb. 2. Unsupervised cannot climb. 3. Do not climb the helmet without wearing a safety helmet, wearing a seat belt, or tightening the pants. 4. There are more than six winds and heavy rains on the job site, heavy snow, and heavy fog cannot climb. 5. Scaffolding and springboards are not strong enough to climb. 6. The ladder has no anti-slip measures and cannot be climbed without wearing non-slip shoes. 7. It is not possible to climb derricks, gantry frames, scaffolding, and cannot climb on non-manned vertical transport equipment. 8. Carrying bulky items cannot climb. 9. There is no obstruction next to the high voltage line and cannot be raised. 10. Insufficient light can't climb. 11. High-altitude workers must pass the professional training and professional examinations, be certified to work, and pass the physical examination before entering the construction. Regular physical examination is required. During the operation, the construction workers should be light-weighted. It is forbidden to wear hard-soled shoes, slippers, high-heeled shoes and various shoes with nails or slippery to work at heights. ZHEJIANG HESHUO TECHNOLOGY CO.,LTD , https://www.hosuocn.com