[Tips] Introduction to the main technical parameters of the safety shoe compression tester

The safety shoe compression tester measures the compression resistance of the toe cap and the puncture resistance of the steel mid-plate to prevent accidental injury to the wearer when wearing it in the workplace due to insufficient safety performance of the shoes. The product has a speed control function, the test speed can be arbitrarily adjusted according to customer requirements, and has three units of kg, N, lb can be arbitrarily switched function, and with a micro-printer, the test results can be printed out.

Safety shoes compression testing machine technical parameters:

1. Host structure: desktop, can control the compression speed, real-time display of the steel head compressive stress value, displacement and so on.

2. Pressure range: 20000N, (EN) 15 ± 0.1KN, (ANSI) 1000 ± 50 ~ 10000 ± 50lbs

3 pressure sensing accuracy: load ± 0.1%

4. Pressure display resolution: 1/10000.

5. Platen hardness: 60HRC.

6. Puncture steel nails: (4.5 ± 0.05) mm in diameter, with a truncated tip and a tip with a hardness of at least 60 HRC. Meet the requirements of ISO20344, ANSIZ41 and LD50.

7. Test speed range: 5 ~ 500mm/min adjustable

8. Test speed: compression speed (10 ± 3) mm/min

Puncture speed (5±2)mm/min

9. Displacement display: 0.01mm

10. Unit conversion: three units of kg, N, LB can be switched

11. Power: AC Motor + Reducer

12. Host function: the pressure reaches the set value can automatically stop; there is an upper limit protection and peak retention function, can automatically stop.

13. Volume: about 712×330×828mm

14. Weight: about 115kg

15. Power: 1 ∮, AC220V