Tile arched handle trick tiles will be arched why

Renovation is a problem that everyone is very distressed, mainly because there are too many things in all aspects. If you are careless, you will be negligent and lead to some problems. Tiles are a common problem and it is not difficult to handle them. , so today Xiao Bian will give you a presentation about the tricks of tile arching , and take a look at how the tiles will be arched.

1. Tiles arched handle trick

Tiles arched deal with tricks , we must first do a check to see if your home is part of the tile arch or all the tiles will be arched, you can use the hand joints to tap the tile to hear the sound of it to identify, there is empty sound Tiles, which are already empty, are not suitable for continued use. If a pressure is applied to them, the tiles will easily break.

When the naked eye only sees the occurrence of arching in individual tiles, some tiles can be taken directly. This is generally because the ceramic tile and cement have been layered; the ones that cannot be removed are cut off at the edge of the floor tile by a cutting machine. After the cut, the arched tile will be restored to its original shape, and then the cement on the edge of the tile removed and the original cement on the back will be removed, wiped clean with a rag, and then coated with white glue on the back of the tile. Now.

If all the floor tiles have been arched, you will need to find the decoration master to re-paving. At this time, you must mark the order of the floor tiles you took, and you will be able to keep the original direction of the floor tiles unchanged and prevent the unevenness of the floor tiles. If the floor tiles are still in the manufacturer's warranty date, it is better to go to the manufacturer to replace the floor tiles.

2. Why does the tile arch?

a. Tiles may be arched because the expansion gap between the tiles or the surrounding walls is too thin. When the external environment changes, the floor, cement layer, and tiles will show thermal expansion and contraction. Too thin, the tiles can be easily arched, and this reason is more common in the north.

b. If the materials used for bonding are not mixed according to the correct proportion when laying tiles, this phenomenon will happen. If the cement's label is low, the yellow sand is too much, the time is too long, the lower layer Cement will not stick to the tiles, and the tiles arch.

c. Paving tiles are not laid according to the formal process, or reducing the steps will also lead to arching of the tiles.

d. If the floor tile is only a single alice, there will not be empty drums in the middle. The reason for the arching is that the quality of the floor tile is not up to the standard.

e. If the original concrete floor is very smooth and tiled without burr, tile arching will also occur.

Editor's Note: The above is the introduction of tile arch treatment tricks and why the tiles will be arched, if the poor tile laying process, improper bonding materials, or the tiles themselves have quality problems will cause the tiles to arch, hopefully small Editing and sharing the trick can help everyone.

High Wattage Lamp Emergency Conversion Kit

Replacing Emergency Lights,Best Emergency Light,Automatic Emergency Light,Lamp Emergency Conversion Kit,led battery driver

Foshan Nai An Lighting Electric Co.,ltd , https://www.naipsled.com