Characteristics and Advantages
(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;
(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.
(3) Anti-clamping function: automatically reverse when meeting barriers;
(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)
(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;
(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;
(7) Bi-doors inter-locking: one of the door leaves always remains closing;
(8)Safety sensor terminal: sensor stops working when door closed;
(9)Unique coating technology: never rusty;
(10)Easy and convenient to install;
(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.
Technical Specification
Specification
Light Duty
Heavy Duty
Rang of the Door
Single-Leaf
Double-Leaf
Single-Leaf
Double-Leaf
Door leaf max weight
100kg
100kg x 2
200kg
200kg x 2
Mounting Method
Surface mounting or built-in mounting
Open Width
700-2000mm
650-2000mm
750-2000mm
650-2000mm
Power Supply
AC 220v ± 10%, 50-60 Hz
Opening Speed
300-500mm/s (adjustable)
Closing Speed
250-550mm/s (adjustable)
Creep speed
30-100mm/s (adjustable)
Hold-open time
0.5-20s (adjustable)
Airproof Force (Max.)
>70N
Manual Pushing Force
<100N
Electronic Lock Force
>800N
Power consumption
150W
Ambient temperature
-20+50 C
Technical Details:
(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;
(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;
(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.
(4)Feet sensor switch applied to avoid contagion;
Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com
The Energy Bureau urgently overweights 200 billion yuan or solves problems for the photovoltaic industry.
For the domestic photovoltaic manufacturing industry, which is surrounded by all sides, the substantial expansion of the domestic market will be the hope for them to survive the harsh winter. The reporter learned from the photovoltaic giants such as Yingli, Artes, and Zhongsheng Optoelectronics that the National Energy Administration is planning to revise the “12th Five-Year Plan for Solar Power Generation†and prepare to plan domestic PV distributed generation during the 12th Five-Year Plan period. There is no need to access the power grid, and the target of 10GW (1GW equals 1 million kilowatts) of installed capacity of the nearby digestive power station is raised to 15GW, an increase of 50%. If this measure is implemented, it will undoubtedly be a shot-in for the domestic PV industry. The Energy Bureau urgently added code. At the end of September, domestic PV giants such as Yingli and Artes received the Notice of the National Energy Administration on Declaring the Application Zone for Distributed Photovoltaic Power Generation. Wang Zhixin, head of the Yingli Green Energy Propaganda Department, told the Nanfang Daily reporter that the “Notice†stated that the number of declarations supported by each province (autonomous region, municipality) in the first phase should not exceed three, and the declared total installed capacity should not exceed 500MW in principle. Calculated by 31 provinces (autonomous regions and municipalities), the total installed capacity will reach 15GW. The domestic PV market has been slow to start on a large scale. A key factor is that photovoltaic power generation is “difficult to access the Internetâ€. The reason for the difficulty in accessing the Internet is that, in addition to the high cost of photovoltaic power generation, the instability of power supply also makes the power grid far away from photovoltaic power generation. Wang Zhixin said: "Don't focus on the Internet alone, distributed photovoltaic power generation is also an important development direction, distributed power generation does not need to rely on the Internet. Yingli will expand the domestic market, it will put 30% -40% of the target In the distributed power generation market." Bringing tens of billions of photovoltaic products demand In recent years, the United States and the European Union have launched a double-reverse investigation of China's photovoltaic industry, making China's photovoltaic manufacturing industry face the catastrophe. Therefore, since last year, the photovoltaic industry has been calling on the state to increase support to start the domestic PV market. At this time, the National Energy Administration plans to significantly increase the amount of photovoltaic distributed power generation, which is a major positive for the Chinese PV manufacturing industry in distress. The data shows that the current construction cost of the distributed photovoltaic system in China is 15,000 yuan per kWh. To achieve 15GW of distributed generation capacity during the 12th Five-Year Plan period, it means that over 200 billion yuan will be needed to build the distribution within the next three years. Photovoltaic power station. Li Qiuyi, deputy director of Zhongsheng Optoelectronics Public Relations, said that a large part of the investment in distributed power stations is used to purchase photovoltaic modules and solar cells. Therefore, more than 200 billion investment will drive tens of billions of photovoltaic modules and solar energy. Battery requirements.