Specification for high temperature resistant tape A plate flange is a flat, circular disk that is welded onto the end of a steel pipe and allows it to be bolted to another pipe. Typically used in fuel and water pipelines, the two flange plates will be bolted together with a gasket in between them. The flange plate will have bolt holes all around the perimeter and will be used to create junctions, tees and joints. Plate Flanges,Flange Dimensions,Forged Steel Plate Flanges,Plate Flat Flange Shandong Zhongnuo Heavy Industry Co.,Ltd. , https://www.znforged.com
v Tape high temperature range value:
Short-term 300° long-term 260°
v Production of wide and length specifications:
Conventional 500mm*33M/66M large parent roll 500mm*500M
v Note:
1. When using high temperature resistant tape, be careful not to have oil, powder, dust, or other release agent on the surface of the adhesive. 2, when the high temperature resistant tape is used on the material containing plasticizer, the viscosity will be affected, and the use should be checked.
v Excellent electrical performance, high temperature resistance, low temperature, high insulation (≤8.5KV), acid and alkali resistance, low electrolysis, good mechanical properties, abrasion resistance, tear resistance, special adhesive treatment, strong adhesion, tearing off Back masked surface
v A large number of applications for anti-weld protection, transformer coil high temperature insulation bundling; capacitor insulation material, PCB board gold finger high temperature spray shielding protection, mobile phone lithium battery manufacturing strapping
Http://news.chinawj.com.cn Submission: