Metal Products Ceiling Ceilings: Aluminium buckles are the most common type of metal ceilings and are mainly used for ceilings in kitchens and bathrooms. The whole construction of the aluminum buckle plate is made of all-metal. It is superior to PVC material and plastic steel material in terms of service life and enveloping ability. The aluminum buckle plate has many types, smooth lines, rich colors, good appearance, and is more fireproof, moistureproof, easy to install, and easy to clean. Gypsum board ceiling: Divided into ordinary paper gypsum board, fiber gypsum board, gypsum board; in the modern home improvement gypsum board ceiling is mainly used for living room ceiling. It is made of cooked gypsum as the main raw material mixed with additives and fibers, with light weight, heat insulation, non-combustible, can be sawn nails, sound absorption, humidity control, aesthetics and other properties, but poor moisture resistance. Splint ceiling (wood suspended ceiling): splint (also known as plywood), is the cooking of the log after softening, cut into large sheets along the annual rings, through the drying, finishing, coating, forming, hot pressing, sawing made . With light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, insulation and other advantages. Plywood ceiling has been gradually used, because the wooden plywood is affected by the indoor temperature, humidity, easily deformed, twisted, warping, cracking, and the gypsum board stability exceeds the splint. PVC ceiling: PVC is an abbreviation of PVC material and belongs to a kind of plastic decoration material. The main advantages of PVC materials are: lighter materials, waterproof and moisture-proof, as well as flame-retardant and heat-insulating characteristics. The disadvantages of PVC are: high temperature resistance, workability in hot environments, and physical properties that are not stable enough. A few years ago, it was very popular in the market. However, due to environmental protection issues, there is a direct exit from the market. Plastic steel plate ceiling: Plastic steel plate is a kind of ceiling material with high hardness, but the substrate is also made of plastic, which has a price advantage. It is improved from the second generation of ceiling material PVC, also known as UPVC, basically overcoming the PVC aging, fading, non-flammable problems. It has made great progress in strength and toughness, and it is easy to install and disassemble, and the cost performance is relatively high. Glass ceilings: Glass ceilings must have reliable structural measures and must be reliably connected to the keel system. Glass ceilings are mostly used for aisle ceilings. Ceiling tiles on the bathroom can be painted glass, do not fade, but also play a mirror effect, enhance the decorative effect. The bending resistance of glass is poor, and it is easy to break. Avoid using glass on the ceiling in large areas. Even if you use it, use glass, wood, or plaster to separate the glass ceiling from a square. Ceiling integrated ceiling industry hot glass decoration home decoration paint gypsum board ceiling price kitchen Glass Sliding Door bathroom ceiling material bathroom waterproof bathroom waterproof price waterproof bathroom ceiling Door Operator ,Automatic Sliding Door , Glass Sliding Door PAD Automatic Doors Technology Co., Ltd. , http://www.shrevolvingdoor.com